Après moult tests, (vider le cache, différents navigateur depuis différents PC, essai sur un port HTTP ou HTTPS,...) J'ai fini par faire 3 choses: passer l'interface en Français utiliser un nouveau theme (element-light) et bien sûr cocher 'Accepter de nouveaux dispositifs matériels' dans les paramètres. et les dispositifs sont montés !

Bonjour, ça peut venir du dongle sur les vieilles versions parfois ça arrivait, il y a un fix ici https://community.ch2i.eu/topic/217/

@Charles 1,5K en // comme sur ton schéma

Pour moi le dongle est HS car sur le compteur, je peux défiler jusqu'à mode tic et j'ai bien historique. Après je ne sais pas si c'est représentatif, mais j'ai entre 0.4 et 0.5V (voltmètre classique en alternatif) aux bornes du bornier à vis ! Preuve il me semble que le signal arrive jusqu'au dongle !! Précision, quand je branche le dongle, la led rouge s'allume une fraction de seconde avant de s'éteindre complètement, la led verte est elle bien allumée Comment faire? Il n'y a aucun moyen d'avoir un support ?

@thunderx Pas de soucis, retourne moi le dongle je t'en envoie un nouveau si il est HS je t'envoie un chat pour les modalités

Non c'est pour tester quand tu n'as pas de compteur, tu peux brancher directement le signal teleinfo dessus

Mon problème c'est que c'est un hub intégré, ie c'est un port USB en façade sur mon serveur. Je vais voir si c'est mieux avec un autre port, mais mon câble n'est pas très long. C'est arrivé une 2e fois jeudi matin, mais rien depuis. On va voir si c'est vraiment fréquent. Un espoir d'avoir un correctif SW? D'ailleurs ça vient du kernel, du driver, ou du chip?

Bonsoir ! Je viens de commander la dernière version de la version USB, j'espère recevoir cela très bientôt. Vraiment super tous ces tutos sur la téléinfo. Cela faisait longtemps que je voulais superviser mes consommations. Merci, Laurent.

@Charles here it is, thanks for your help, let me know if you spot something in the data: $ udevadm info --attribute-walk -n /dev/ttyUSB0 Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/ttyUSB0/tty/ttyUSB0': KERNEL=="ttyUSB0" SUBSYSTEM=="tty" DRIVER=="" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/ttyUSB0': KERNELS=="ttyUSB0" SUBSYSTEMS=="usb-serial" DRIVERS=="ftdi_sio" ATTRS{port_number}=="0" ATTRS{latency_timer}=="1" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0': KERNELS=="1-1.2:1.0" SUBSYSTEMS=="usb" DRIVERS=="ftdi_sio" ATTRS{bInterfaceClass}=="ff" ATTRS{bInterfaceSubClass}=="ff" ATTRS{bInterfaceProtocol}=="ff" ATTRS{bNumEndpoints}=="02" ATTRS{authorized}=="1" ATTRS{supports_autosuspend}=="1" ATTRS{bAlternateSetting}==" 0" ATTRS{bInterfaceNumber}=="00" ATTRS{interface}=="Papouch SB485S (SC)" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2': KERNELS=="1-1.2" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{devpath}=="1.2" ATTRS{idVendor}=="0403" ATTRS{speed}=="12" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="8" ATTRS{busnum}=="1" ATTRS{devnum}=="4" ATTRS{configuration}=="" ATTRS{bMaxPower}=="100mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="80" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="0" ATTRS{bcdDevice}=="0600" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{serial}=="PPTPLYYD" ATTRS{version}==" 2.00" ATTRS{urbnum}=="36003915" ATTRS{ltm_capable}=="no" ATTRS{manufacturer}=="Papouch s.r.o." ATTRS{removable}=="removable" ATTRS{idProduct}=="6001" ATTRS{bDeviceClass}=="00" ATTRS{product}=="Papouch SB485S (SC)" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1': KERNELS=="1-1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="02" ATTRS{devpath}=="1" ATTRS{idVendor}=="0424" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{busnum}=="1" ATTRS{devnum}=="2" ATTRS{configuration}=="" ATTRS{bMaxPower}=="2mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="5" ATTRS{bcdDevice}=="0200" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{version}==" 2.00" ATTRS{urbnum}=="54" ATTRS{ltm_capable}=="no" ATTRS{removable}=="unknown" ATTRS{idProduct}=="9514" ATTRS{bDeviceClass}=="09" looking at parent device '/devices/platform/soc/3f980000.usb/usb1': KERNELS=="usb1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="01" ATTRS{devpath}=="0" ATTRS{idVendor}=="1d6b" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{authorized_default}=="1" ATTRS{busnum}=="1" ATTRS{devnum}=="1" ATTRS{configuration}=="" ATTRS{bMaxPower}=="0mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="1" ATTRS{interface_authorized_default}=="1" ATTRS{bcdDevice}=="0404" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{serial}=="3f980000.usb" ATTRS{version}==" 2.00" ATTRS{urbnum}=="25" ATTRS{ltm_capable}=="no" ATTRS{manufacturer}=="Linux 4.4.27-v7+ dwc_otg_hcd" ATTRS{removable}=="unknown" ATTRS{idProduct}=="0002" ATTRS{bDeviceClass}=="09" ATTRS{product}=="DWC OTG Controller" looking at parent device '/devices/platform/soc/3f980000.usb': KERNELS=="3f980000.usb" SUBSYSTEMS=="platform" DRIVERS=="dwc_otg" ATTRS{hnp}=="HstNegScs = 0x0" ATTRS{srp}=="SesReqScs = 0x1" ATTRS{regvalue}=="invalid offset" ATTRS{hsic_connect}=="HSIC Connect = 0x1" ATTRS{guid}=="GUID = 0x2708a000" ATTRS{mode}=="Mode = 0x1" ATTRS{srpcapable}=="SRPCapable = 0x1" ATTRS{regdump}=="Register Dump" ATTRS{gpvndctl}=="GPVNDCTL = 0x00000000" ATTRS{ggpio}=="GGPIO = 0x00000000" ATTRS{hprt0}=="HPRT0 = 0x00001405" ATTRS{wr_reg_test}=="Time to write GNPTXFSIZ reg 10000000 times: 1060 msecs (106 jiffies)" ATTRS{driver_override}=="(null)" ATTRS{hcd_frrem}=="HCD Dump Frame Remaining" ATTRS{mode_ch_tim_en}=="Mode Change Ready Timer Enable = 0x0" ATTRS{gnptxfsiz}=="GNPTXFSIZ = 0x01000306" ATTRS{remote_wakeup}=="Remote Wakeup Sig = 0 Enabled = 0 LPM Remote Wakeup = 0" ATTRS{busconnected}=="Bus Connected = 0x1" ATTRS{hcddump}=="HCD Dump" ATTRS{gotgctl}=="GOTGCTL = 0x001c0001" ATTRS{spramdump}=="SPRAM Dump" ATTRS{grxfsiz}=="GRXFSIZ = 0x00000306" ATTRS{gsnpsid}=="GSNPSID = 0x4f54280a" ATTRS{gusbcfg}=="GUSBCFG = 0x20001700" ATTRS{hptxfsiz}=="HPTXFSIZ = 0x02000406" ATTRS{devspeed}=="Device Speed = 0x0" ATTRS{fr_interval}=="Frame Interval = 0x1d4c" ATTRS{rem_wakeup_pwrdn}=="" ATTRS{bussuspend}=="Bus Suspend = 0x0" ATTRS{buspower}=="Bus Power = 0x1" ATTRS{hnpcapable}=="HNPCapable = 0x1" ATTRS{rd_reg_test}=="Time to read GNPTXFSIZ reg 10000000 times: 2140 msecs (214 jiffies)" ATTRS{enumspeed}=="Device Enumeration Speed = 0x1" ATTRS{inv_sel_hsic}=="Invert Select HSIC = 0x0" ATTRS{regoffset}=="0xffffffff" looking at parent device '/devices/platform/soc': KERNELS=="soc" SUBSYSTEMS=="platform" DRIVERS=="" ATTRS{driver_override}=="(null)" looking at parent device '/devices/platform': KERNELS=="platform" SUBSYSTEMS=="" DRIVERS=="" $ udevadm info --attribute-walk -n /dev/ttyUSB1 Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/ttyUSB1/tty/ttyUSB1': KERNEL=="ttyUSB1" SUBSYSTEM=="tty" DRIVER=="" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/ttyUSB1': KERNELS=="ttyUSB1" SUBSYSTEMS=="usb-serial" DRIVERS=="ch341-uart" ATTRS{port_number}=="0" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0': KERNELS=="1-1.4:1.0" SUBSYSTEMS=="usb" DRIVERS=="ch341" ATTRS{bInterfaceClass}=="ff" ATTRS{bInterfaceSubClass}=="01" ATTRS{bInterfaceProtocol}=="02" ATTRS{bNumEndpoints}=="03" ATTRS{authorized}=="1" ATTRS{supports_autosuspend}=="1" ATTRS{bAlternateSetting}==" 0" ATTRS{bInterfaceNumber}=="00" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4': KERNELS=="1-1.4" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{devpath}=="1.4" ATTRS{idVendor}=="1a86" ATTRS{speed}=="12" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="8" ATTRS{busnum}=="1" ATTRS{devnum}=="5" ATTRS{configuration}=="" ATTRS{bMaxPower}=="96mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="80" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="0" ATTRS{bcdDevice}=="0254" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{version}==" 1.10" ATTRS{urbnum}=="7492" ATTRS{ltm_capable}=="no" ATTRS{removable}=="removable" ATTRS{idProduct}=="7523" ATTRS{bDeviceClass}=="ff" ATTRS{product}=="USB2.0-Serial" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1': KERNELS=="1-1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="02" ATTRS{devpath}=="1" ATTRS{idVendor}=="0424" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{busnum}=="1" ATTRS{devnum}=="2" ATTRS{configuration}=="" ATTRS{bMaxPower}=="2mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="5" ATTRS{bcdDevice}=="0200" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{version}==" 2.00" ATTRS{urbnum}=="54" ATTRS{ltm_capable}=="no" ATTRS{removable}=="unknown" ATTRS{idProduct}=="9514" ATTRS{bDeviceClass}=="09" looking at parent device '/devices/platform/soc/3f980000.usb/usb1': KERNELS=="usb1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="01" ATTRS{devpath}=="0" ATTRS{idVendor}=="1d6b" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{authorized_default}=="1" ATTRS{busnum}=="1" ATTRS{devnum}=="1" ATTRS{configuration}=="" ATTRS{bMaxPower}=="0mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="1" ATTRS{interface_authorized_default}=="1" ATTRS{bcdDevice}=="0404" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{serial}=="3f980000.usb" ATTRS{version}==" 2.00" ATTRS{urbnum}=="25" ATTRS{ltm_capable}=="no" ATTRS{manufacturer}=="Linux 4.4.27-v7+ dwc_otg_hcd" ATTRS{removable}=="unknown" ATTRS{idProduct}=="0002" ATTRS{bDeviceClass}=="09" ATTRS{product}=="DWC OTG Controller" looking at parent device '/devices/platform/soc/3f980000.usb': KERNELS=="3f980000.usb" SUBSYSTEMS=="platform" DRIVERS=="dwc_otg" ATTRS{hnp}=="HstNegScs = 0x0" ATTRS{srp}=="SesReqScs = 0x1" ATTRS{regvalue}=="invalid offset" ATTRS{hsic_connect}=="HSIC Connect = 0x1" ATTRS{guid}=="GUID = 0x2708a000" ATTRS{mode}=="Mode = 0x1" ATTRS{srpcapable}=="SRPCapable = 0x1" ATTRS{regdump}=="Register Dump" ATTRS{gpvndctl}=="GPVNDCTL = 0x00000000" ATTRS{ggpio}=="GGPIO = 0x00000000" ATTRS{hprt0}=="HPRT0 = 0x00001405" ATTRS{wr_reg_test}=="Time to write GNPTXFSIZ reg 10000000 times: 870 msecs (87 jiffies)" ATTRS{driver_override}=="(null)" ATTRS{hcd_frrem}=="HCD Dump Frame Remaining" ATTRS{mode_ch_tim_en}=="Mode Change Ready Timer Enable = 0x0" ATTRS{gnptxfsiz}=="GNPTXFSIZ = 0x01000306" ATTRS{remote_wakeup}=="Remote Wakeup Sig = 0 Enabled = 0 LPM Remote Wakeup = 0" ATTRS{busconnected}=="Bus Connected = 0x1" ATTRS{hcddump}=="HCD Dump" ATTRS{gotgctl}=="GOTGCTL = 0x001c0001" ATTRS{spramdump}=="SPRAM Dump" ATTRS{grxfsiz}=="GRXFSIZ = 0x00000306" ATTRS{gsnpsid}=="GSNPSID = 0x4f54280a" ATTRS{gusbcfg}=="GUSBCFG = 0x20001700" ATTRS{hptxfsiz}=="HPTXFSIZ = 0x02000406" ATTRS{devspeed}=="Device Speed = 0x0" ATTRS{fr_interval}=="Frame Interval = 0x1d4c" ATTRS{rem_wakeup_pwrdn}=="" ATTRS{bussuspend}=="Bus Suspend = 0x0" ATTRS{buspower}=="Bus Power = 0x1" ATTRS{hnpcapable}=="HNPCapable = 0x1" ATTRS{rd_reg_test}=="Time to read GNPTXFSIZ reg 10000000 times: 1890 msecs (189 jiffies)" ATTRS{enumspeed}=="Device Enumeration Speed = 0x1" ATTRS{inv_sel_hsic}=="Invert Select HSIC = 0x0" ATTRS{regoffset}=="0xffffffff" looking at parent device '/devices/platform/soc': KERNELS=="soc" SUBSYSTEMS=="platform" DRIVERS=="" ATTRS{driver_override}=="(null)" looking at parent device '/devices/platform': KERNELS=="platform" SUBSYSTEMS=="" DRIVERS=="" $ udevadm info --attribute-walk -n /dev/ttyUSB2 Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/ttyUSB2/tty/ttyUSB2': KERNEL=="ttyUSB2" SUBSYSTEM=="tty" DRIVER=="" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/ttyUSB2': KERNELS=="ttyUSB2" SUBSYSTEMS=="usb-serial" DRIVERS=="ch341-uart" ATTRS{port_number}=="0" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0': KERNELS=="1-1.5:1.0" SUBSYSTEMS=="usb" DRIVERS=="ch341" ATTRS{bInterfaceClass}=="ff" ATTRS{bInterfaceSubClass}=="01" ATTRS{bInterfaceProtocol}=="02" ATTRS{bNumEndpoints}=="03" ATTRS{authorized}=="1" ATTRS{supports_autosuspend}=="1" ATTRS{bAlternateSetting}==" 0" ATTRS{bInterfaceNumber}=="00" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5': KERNELS=="1-1.5" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{devpath}=="1.5" ATTRS{idVendor}=="1a86" ATTRS{speed}=="12" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="8" ATTRS{busnum}=="1" ATTRS{devnum}=="6" ATTRS{configuration}=="" ATTRS{bMaxPower}=="96mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="80" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="0" ATTRS{bcdDevice}=="0254" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{version}==" 1.10" ATTRS{urbnum}=="900734" ATTRS{ltm_capable}=="no" ATTRS{removable}=="removable" ATTRS{idProduct}=="7523" ATTRS{bDeviceClass}=="ff" ATTRS{product}=="USB2.0-Serial" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1': KERNELS=="1-1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="02" ATTRS{devpath}=="1" ATTRS{idVendor}=="0424" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{busnum}=="1" ATTRS{devnum}=="2" ATTRS{configuration}=="" ATTRS{bMaxPower}=="2mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="5" ATTRS{bcdDevice}=="0200" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{version}==" 2.00" ATTRS{urbnum}=="54" ATTRS{ltm_capable}=="no" ATTRS{removable}=="unknown" ATTRS{idProduct}=="9514" ATTRS{bDeviceClass}=="09" looking at parent device '/devices/platform/soc/3f980000.usb/usb1': KERNELS=="usb1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="01" ATTRS{devpath}=="0" ATTRS{idVendor}=="1d6b" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{authorized_default}=="1" ATTRS{busnum}=="1" ATTRS{devnum}=="1" ATTRS{configuration}=="" ATTRS{bMaxPower}=="0mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="1" ATTRS{interface_authorized_default}=="1" ATTRS{bcdDevice}=="0404" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{serial}=="3f980000.usb" ATTRS{version}==" 2.00" ATTRS{urbnum}=="25" ATTRS{ltm_capable}=="no" ATTRS{manufacturer}=="Linux 4.4.27-v7+ dwc_otg_hcd" ATTRS{removable}=="unknown" ATTRS{idProduct}=="0002" ATTRS{bDeviceClass}=="09" ATTRS{product}=="DWC OTG Controller" looking at parent device '/devices/platform/soc/3f980000.usb': KERNELS=="3f980000.usb" SUBSYSTEMS=="platform" DRIVERS=="dwc_otg" ATTRS{hnp}=="HstNegScs = 0x0" ATTRS{srp}=="SesReqScs = 0x1" ATTRS{regvalue}=="invalid offset" ATTRS{hsic_connect}=="HSIC Connect = 0x1" ATTRS{guid}=="GUID = 0x2708a000" ATTRS{mode}=="Mode = 0x1" ATTRS{srpcapable}=="SRPCapable = 0x1" ATTRS{regdump}=="Register Dump" ATTRS{gpvndctl}=="GPVNDCTL = 0x00000000" ATTRS{ggpio}=="GGPIO = 0x00000000" ATTRS{hprt0}=="HPRT0 = 0x00001005" ATTRS{wr_reg_test}=="Time to write GNPTXFSIZ reg 10000000 times: 680 msecs (68 jiffies)" ATTRS{driver_override}=="(null)" ATTRS{hcd_frrem}=="HCD Dump Frame Remaining" ATTRS{mode_ch_tim_en}=="Mode Change Ready Timer Enable = 0x0" ATTRS{gnptxfsiz}=="GNPTXFSIZ = 0x01000306" ATTRS{remote_wakeup}=="Remote Wakeup Sig = 0 Enabled = 0 LPM Remote Wakeup = 0" ATTRS{busconnected}=="Bus Connected = 0x1" ATTRS{hcddump}=="HCD Dump" ATTRS{gotgctl}=="GOTGCTL = 0x001c0001" ATTRS{spramdump}=="SPRAM Dump" ATTRS{grxfsiz}=="GRXFSIZ = 0x00000306" ATTRS{gsnpsid}=="GSNPSID = 0x4f54280a" ATTRS{gusbcfg}=="GUSBCFG = 0x20001700" ATTRS{hptxfsiz}=="HPTXFSIZ = 0x02000406" ATTRS{devspeed}=="Device Speed = 0x0" ATTRS{fr_interval}=="Frame Interval = 0x1d4c" ATTRS{rem_wakeup_pwrdn}=="" ATTRS{bussuspend}=="Bus Suspend = 0x0" ATTRS{buspower}=="Bus Power = 0x1" ATTRS{hnpcapable}=="HNPCapable = 0x1" ATTRS{rd_reg_test}=="Time to read GNPTXFSIZ reg 10000000 times: 1700 msecs (170 jiffies)" ATTRS{enumspeed}=="Device Enumeration Speed = 0x1" ATTRS{inv_sel_hsic}=="Invert Select HSIC = 0x0" ATTRS{regoffset}=="0xffffffff" looking at parent device '/devices/platform/soc': KERNELS=="soc" SUBSYSTEMS=="platform" DRIVERS=="" ATTRS{driver_override}=="(null)" looking at parent device '/devices/platform': KERNELS=="platform" SUBSYSTEMS=="" DRIVERS==""

@jpl peu-etre pourrais tu préciser ce que tu souhaites faire avec la téléinfo parce que je ne suis pas certain de tout comprendre ?

Hello, oui en effet cela vient bien du plugin. et finalement l'integration se fait tres bien dans Jeedom. Encore merci a Charles pour le travail

@Elcanux Il va falloir me renvoyer le module alors, c'est curieux ils sont toujours testés avant envoi. Une fois analysé et corrigé le soucis, je le renvois. Je ne peux pas en envoyer par avance, je ne les fais plus ceux là depuis la V1.1 ;-( J'envois les infos pour le retour par chat Charles

Quelle est la configuration du /dev/ttyUSB ?

@badz Je te dirais que çà fonctionne sans mosfet dans 90/95% des cas, et si tu es dans ce cas de non fonctionnement il faut réduire la résistance de l'opto (voir la shunter). Sur les uTéléinofo USB je mets une 1K2 par défaut maintenant ce qui semble régler le soucis, mais clairement dans une nouvelle révision je mettrais le mosfet