@Charles Merci beaucoup pour cette info ça fonctionne!

Bonjour,

J'ai le module Pitinfo cablé sur un wemos mini d1 de la façon suivante:

Cablage
wemos-- pitinfo
3.3V VCC
G GND
D6 Led
RX TXD

J'utilise le Firmware suivant :
Tasmota 12.5.0 by Theo Arends
Teleinfo 11.1 (esp8266) by Nicolas Bernaerts

Configuration dans le Wemos mini d1:

RX GPIO3 -->Tinfo RX
D6 GPIO12 Output Hi

Les trames sont bien traitées par le Wemos mini d1.

@Charles : tu m'avais conseillé le wemos télinfo V1.1 qui est plus simple à connecter sur un Wemos mini d1 car il est plug & play.

Comme j'ai besoin du Pitinfo pour une autre appli, j'ai commandé le Wemos téleinfo V1.1

Je viens d'essayer de le mettre juste en déconnectant le Pitinfo et en connectant Wemos téleinfo V1.1.
A la remise sous tension
La led du module s'allume mais je ne reçois aucune info dans le Wemos.

D'après-vous qu'est qui pourrait en être la cause?

Merci pour votre aide
Samquad

@localhost61 merci ma sonde de température fonctionne!

@localhost61 Merci beaucoup pour ton aide rapide et expertise sur le sujet. Ca fait plusieurs mois que je galère avec ce problème --> depuis que j'ai fait changer le mode historique en mode standard pour récupérer mes index de production solaire.

Je viens d'ajouter une résistance de 220Ω en série sur un des fils branché sur le linky et je n'ai quasiment plus d'erreur checksum avec la version tasmota téléinfo officielle.

J'en ai profité pour installer la version Tasmota 12.5.0 by Theo Arends
Teleinfo 11.1 (esp8266) by Nicolas Bernaerts qui gère plus efficacement la com et ça fonctionne niquel ! je n'ai plus d'erreur !

Mon wemos mini d1 dédié au téléinfo gère habituellement un compteur d'impulsion (compteur d'eau) et une sonde extérieure 18b20.
Sais-tu si c'est possible d'ajouter la gestion des sondes 18b20car elle manque à la compilation.
J'ai essayé de modifier le fichier my_user_config.h en décochant la ligne 1021

 line 1021:  define THERMOSTAT_SENSOR_NAME                "DS18B20" // Name of the local sensor to be used

Mais j'ai plein d'erreur quand je tente de compiler le programme.
Est-ce que c'est possible d'ajouter DS18B20 ou est-ce qu'il vaut mieux le gérer avec un autre wemos?

@localhost61
Merci pour l'info et le lien du code source.
J'ai pu compiler et faire mes premier tests.
J'utilise pitinfo V1.2 pour RPI branché sur Wemos mini d1 8266.
En fait je contacte 45% d'erreurs, c'est pas étonnant que la version Tasmota avec téléinfo officelle est en difficulté et m'affiche beaucoup d'erreur de checksum!

Voici mes log:

0:06:23.187 MQT: teleinfo/tele/SENSOR = {"Time":"2023-07-08T10:06:23","TIC":{"ADSC":"031861721681","EASD02":"052672883","ERQ3":"001026972","ERQ4":"006043286","IRMS1":"008","URMS1":"229","PREF":"12","PCOUP":"12","SINSTS":"01796","EASF06":"000000000","EASF07":"000000000","SINSTI":"00000","SMAXIN":"E230708094724 01179","EASD03":"000000000","EASD04":"000000000","EAIT":"008449112","CCAIN-1":"E230708093000 00070","RELAIS":"000","ERQ4":"006043286","IRMS1":"008","URMS1":"229","PREF":"12","PCOUP":"12","NJOURF+1":"00","SINSTS":"01788"}}
10:06:23.493 TIC: Message reset
10:06:25.676 MQT: teleinfo/tele/SENSOR = {"Time":"2023-07-08T10:06:25","TIC":{"ADSC":"031861721681","VTIC":"02","DATE":"E230708100620","LTARF":"BASE","EAST":"085309299","EASF01":"048812616","EASF04":"000000000","EASF05":"000000000","SMAXSN-1":"E230707220002 07280","EASF06":"000000000","EASF09":"000000000","EASF10":"000000000","SMAXIN":"E230708094724 01179","EASD03":"000000000","EASD04":"000000000","EAIT":"008449112","CCAIN-1":"E230708093000 00070","PRM":"12432850902420","IRMS1":"008","URMS1":"229","PREF":"12","PCOUP":"12","SINSTS":"01787","NJOURF+1":"00","SINSTI":"00000","CCASN":"E230708100000 00066","STGE":"003A4101","NTARF":"01","NJOURF":"00","NJOURF+1":"00"}}
10:06:25.689 TIC: Message reset
10:06:27.926 MQT: teleinfo/tele/SENSOR = {"Time":"2023-07-08T10:06:27","TIC":{"ADSC":"031861721681","VTIC":"02","DATE":"E230708100622","EAST":"085309300","ERQ3":"001026972","EASF01":"048812616","EASF04":"000000000","EASF05":"000000000","SMAXSN-1":"E230707220002 07280","EASF06":"000000000","EASF09":"000000000","EASF10":"000000000","SMAXIN":"E230708094724 01179","EASD03":"000000000","EASD04":"000000000","EAIT":"008449112","ERQ1":"004363751","RELAIS":"000","IRMS1":"008","IRMS1":"008","URMS1":"229","PREF":"12","PCOUP":"12","SINSTS":"01797","SINSTI":"00000","SINSTI":"00000","CCASN":"E230708100000 00066","CCASN":"E230708100000 00066","CCAIN-1":"E230708093000 00070","NTARF":"01","NJOURF":"00","NTARF":"01","NJOURF":"00","NJOURF+1":"00"}}
10:06:29.181 MQT: teleinfo/tele/SENSOR = {"Time":"2023-07-08T10:06:29","TIC":{"ADSC":"031861721681","VTIC":"02","ERQ2":"000143666","NGTF":"BASE","ERQ4":"006043287","EAST":"085309300","EASF02":"036496683","EASF05":"000000000","SMAXIN-1":"E230707131502 04978","EASF06":"000000000","EASF06":"000000000","CCAIN":"E230708100000 00422","SMAXIN":"E230708094724 01179","EASD03":"000000000","STGE":"003A4101","EASD02":"052672886","PRM":"12432850902420","RELAIS":"000","NTARF":"01","NJOURF":"00","NJOURF+1":"00","PREF":"12"}}
10:06:29.195 TIC: Message reset
10:06:30.179 MQT: teleinfo/tele/SENSOR = {"Time":"2023-07-08T10:06:30","TIC":{"ADSC":"031861721681","VTIC":"02","ERQ3":"001026972","ERQ4":"006043287","IRMS1":"008","URMS1":"229","PREF":"12","PCOUP":"12","SMAXIN-1":"E230707131502 04978","SMAXSN-1":"E230707220002 07280","SINSTI":"00000","CCAIN":"E230708100000 00422","SMAXIN":"E230708094724 01179","EASD03":"000000000","CCAIN":"E230708100000 00422","EASD02":"052672886","PRM":"12432850902420","STGE":"003A4101","NTARF":"01","PRM":"12432850902420","RELAIS":"000","NTARF":"01","NJOURF":"00","NJOURF+1":"00"}}
10:06:31.427 MQT: teleinfo/tele/SENSOR = {"Time":"2023-07-08T10:06:31","TIC":{"ADSC":"031861721681","VTIC":"02","ERQ3":"001026972","NGTF":"BASE","EAST":"085309302","URMS1":"229","PREF":"12","EASF04":"000000000","EASF05":"000000000","SMAXSN-1":"E230707220002 07280","SINSTI":"00000","EASF09":"000000000","EASF10":"000000000","EASD03":"000000000","EASD04":"000000000","EAIT":"008449112","ERQ1":"004363751","STGE":"003A4101","NTARF":"01","URMS1":"229","PREF":"12","PCOUP":"12","SINSTS":"01795","NJOURF+1":"00","SINSTI":"00000","SMAXIN":"E230708094724 01179","CCASN":"E230708100000 00066","CCAIN-1":"E230708093000 00070","MSG1":"PAS DE MESSAGE","NJOURF":"00","NJOURF+1":"00"}}
10:06:32.676 MQT: teleinfo/tele/SENSOR = {"Time":"2023-07-08T10:06:32","TIC":{"ADSC":"031861721681","VTIC":"02","ERQ3":"001026972","LTARF":"BASE","EAST":"085309303","EASF01":"048812620","PREF":"12","PCOUP":"12","SINSTS":"01789","SMAXSN-1":"E230707220002 07280","EASF07":"000000000","SINSTI":"00000","EASF09":"000000000","EASD03":"000000000","EASD04":"000000000","CCAIN":"E230708100000 00422","ERQ1":"004363751","STGE":"003A4101","STGE":"003A4101","URMS1":"229","PREF":"12","RELAIS":"000","NTARF":"01","NJOURF":"00","NJOURF+1":"00","SMAXIN":"E230708094724 01179"}}
10:06:33.676 MQT: teleinfo/tele/SENSOR = {"Time":"2023-07-08T10:06:33","TIC":{"ADSC":"031861721681","VTIC":"02","ERQ3":"001026972","LTARF":"BASE","EAST":"085309303","EASF01":"048812620","PREF":"12","EASF04":"000000000","EASF05":"000000000","EASF06":"000000000","EASF07":"000000000","SINSTI":"00000","EASF10":"000000000","EASD01":"032636414","EASD04":"000000000","CCAIN":"E230708100000 00422","EAIT":"008449112","ERQ1":"004363751","ERQ2":"000143666","URMS1":"229","PREF":"12","RELAIS":"000","PREF":"12","PCOUP":"12","SINSTS":"01797","SMAXSN":"E230708064605 04098","SMAXIN":"E230708094724 01179","CCAIN-1":"E230708093000 00070"}}
10:06:33.841 TIC: Message reset
10:06:34.927 MQT: teleinfo/tele/SENSOR = {"Time":"2023-07-08T10:06:34","TIC":{"ADSC":"031861721681","VTIC":"02","ERQ2":"000143666","EASF08":"000000000","ERQ4":"006043287","EAST":"085309304","URMS1":"229","PREF":"12","PCOUP":"12","SINSTS":"01794","EASF07":"000000000","SINSTI":"00000","SINSTI":"00000","EASD01":"032636414","CCASN":"E230708100000 00066","CCAIN":"E230708100000 00422","EAIT":"008449112","ERQ1":"004363751","ERQ2":"000143666","URMS1":"229","PREF":"12","NTARF":"01","NJOURF":"00","NJOURF+1":"00","SINSTS":"01797"}}
10:06:34.982 TIC: Message reset

J'attends la réception du module WeMos Teleinfo que j'ai commandé @Charles pour voir si ça améliore le signal de réception

Bonjour

Mon linky est en mode standard tarif base avec revente de surplus solaire.
J'utilise la version tasmota teleinfo officielle V12.1.1.2 et pas supérieure car les autres plus récentes ne fonctionnent pas (reboot en boucle à cause de saturation de buffer en réception)
Actuellement ca fonctionne partiellement avec ces erreurs permanentes dans mes logs:

18:18:11.519 LibTeleinfo::checkLine Err checksum 0x2D != 0x42
18:18:11.520 LibTeleinfo::checkLine Err checksum 0x20 != 0x22
18:18:11.757 LibTeleinfo::checkLine Err checksum 0x5C != 0x5D
18:18:11.764 LibTeleinfo::checkLine Err checksum 0x3D != 0x26
18:18:12.009 LibTeleinfo::checkLine Err checksum 0x40 != 0x56

je tente de compiler avec visual studio PlatformIO un firmware pour tester le module téléinfo de @Nicolas-Bernaerts à partir des sources tasmota V12.5.0 et de ces fichiers V11.1 sous https://github.com/NicolasBernaerts/tasmota/tree/master/teleinfo

Je cherche à tester cette version de téléinfo car elle pourrait peut être régler mes problèmes...
J'essaye de compiler un firmware pour un Wemos mini d1 8266 et j'ai des erreurs de compilation que je ne sais pas résoudre. Voici le log de build

 *  Executing task: C:\Users\sbouv\.platformio\penv\Scripts\platformio.exe run --environment tasmota-teleinfo 

Processing tasmota-teleinfo (platform: https://github.com/tasmota/platform-espressif8266/releases/download/2023.04.00/platform-espressif8266.zip; framework: arduino; board: esp8266_1M)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Verbose mode can be enabled via `-v, --verbose` option
*** use provided user_config_override.h as planned ***
*** use provided platformio_override.ini as planned ***
*** use provided platformio_tasmota_cenv.ini as planned ***
CONFIGURATION: https://docs.platformio.org/page/boards/espressif8266/esp8266_1M.html   
PLATFORM: Espressif 8266 (2023.4.0) > Espressif Generic ESP8266 Tasmota 1M sketch NO FS
HARDWARE: ESP8266 80MHz, 80KB RAM, 972.00KB Flash
PACKAGES:
 - framework-arduinoespressif8266 @ 2.7.4+9
 - tool-esptoolpy @ 1.40501.0 (4.5.1)
 - toolchain-xtensa @ 2.40802.200502 (4.8.2)
Converting tasmota.ino
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ strict
Found 59 compatible libraries
Scanning dependencies...
Dependency Graph
|-- Adafruit CCS811 Library @ 1.0.0
|-- Adafruit MAX31865 library @ 1.0.1
|-- Adafruit MCP9808 Library @ 1.1.2
|-- Adafruit PM25 AQI Sensor @ 1.0.6
|-- Adafruit seesaw Library @ 1.3.1
|-- Adafruit SGP30 Sensor @ 1.2.0
|-- Adafruit SGP40 Sensor @ 1.1.0
|-- Adafruit VEML7700 Library @ 1.0.0
|-- BME8563
|-- headers
|-- EEPROM 24C128_256_521
|-- I2Cdevlib-Core
|-- MPU6050 I2C
|-- Mutichannel_Gas_Sensor @ 0.0.1
|-- UdpListener @ 1.0
|-- Unishox Compressor Decompressor highly customized and optimized for ESP8266 and Tasmota @ 1.0
|-- VL53L0X @ 1.0.2
|-- VL53L1X @ 1.0.1
|-- TLS mini client derived from Arduino @ 1.0
|-- Adafruit TSL2591
|-- base64 @ 1.1.1
|-- BME68x
|-- DNSServer @ 1.1.1
|-- ESP8266HTTPClient @ 1.2
|-- ESP8266httpUpdate @ 1.3
|-- ESP8266mDNS @ 1.2
|-- ESP8266WebServer @ 1.0
|-- ESP8266WiFi @ 1.0
|-- Ext-printf @ 1.0
|-- FrogmoreScd30
|-- FrogmoreScd40
|-- FTP
|-- HPMA115S0 Arduino Library @ 1.0.0
|-- IRremoteESP8266 @ 2.8.5
|-- JSMN JSON parser customized and optimized for ESP8266 and Tasmota @ 1.0
|-- LinkedList
|-- LittleFS(esp8266) @ 0.1.0
|-- TasmotaLList @ 1.0
|-- LOLIN_HP303B @ 1.0.0
|-- MLX90640
|-- MPU_accel
|-- NeoPixelBus @ 2.6.7
|-- OneWire @ 2.3.2
|-- PubSubClient @ 2.8
|-- SD(esp8266) @ 2.0.0
|-- ESP8266SdFat @ 1.1.0
|-- Sensirion I2C SEN5X @ 0.2.0
|-- SPI @ 1.0
|-- TasmotaModbus @ 3.6.0
|-- TasmotaSerial @ 3.6.0
|-- Ticker @ 1.0
|-- Joba_Tsl2561 @ 2.0.10
|-- BearSSL @ 0.6
|-- Wire @ 1.0
Building in release mode
Compiling .pio\build\tasmota-teleinfo\src\tasmota.ino.cpp.o
Compiling .pio\build\tasmota-teleinfo\src\tasmota_support\homekit.c.o
Compiling .pio\build\tasmota-teleinfo\src\tasmota_xsns_sensor\xsns_62_esp32_mi_homekit.c.o
Generating LD script .pio\build\tasmota-teleinfo\ld\local.eagle.app.v6.common.ld
Compiling .pio\build\tasmota-teleinfo\libf94\Wire\Wire.cpp.o
Compiling .pio\build\tasmota-teleinfo\lib855\Adafruit_CCS811-1.0.0.14\Adafruit_CCS811.cpp.o
Compiling .pio\build\tasmota-teleinfo\lib021\SPI\SPI.cpp.o
Archiving .pio\build\tasmota-teleinfo\libf94\libWire.a
Archiving .pio\build\tasmota-teleinfo\lib855\libAdafruit_CCS811-1.0.0.14.a
Compiling .pio\build\tasmota-teleinfo\lib7bd\Adafruit_MAX31865-1.1.0-custom\Adafruit_MAX31865.cpp.o
Compiling .pio\build\tasmota-teleinfo\lib94c\Adafruit_MCP9808_Tasmota\Adafruit_MCP9808.cpp.o
Archiving .pio\build\tasmota-teleinfo\lib021\libSPI.a
Compiling .pio\build\tasmota-teleinfo\libc40\Adafruit_BusIO\Adafruit_BusIO_Register.cpp.o
C:/Users/sbouv/Documents/Sam/RPI4/Tasmota/Tasmota-development/tasmota/tasmota_support/support_tasmota.ino: In function 'void SetDevicePower(power_t, uint32_t)':
C:/Users/sbouv/Documents/Sam/RPI4/Tasmota/Tasmota-development/tasmota/tasmota_support/support_tasmota.ino:322:29: error: 'union SOBitfield6' has no member named 'bistable_single_pin'
         if (Settings->flag6.bistable_single_pin) {  // SetOption152 - (Power) Use single pin bistable
                             ^
C:/Users/sbouv/Documents/Sam/RPI4/Tasmota/Tasmota-development/tasmota/tasmota_support/support_tasmota.ino:352:31: error: 'union SOBitfield6' has no member named 'bistable_single_pin'
           if (Settings->flag6.bistable_single_pin) {  // SetOption152 - (Power) Use single pin bistable
                               ^
C:/Users/sbouv/Documents/Sam/RPI4/Tasmota/Tasmota-development/tasmota/tasmota_support/support_tasmota.ino: In function 'void GpioInit()':
C:/Users/sbouv/Documents/Sam/RPI4/Tasmota/Tasmota-development/tasmota/tasmota_support/support_tasmota.ino:2253:28: error: 'union SOBitfield6' has no member named 'bistable_single_pin'
       if (!Settings->flag6.bistable_single_pin) {  // SetOption152 - (Power) Use single pin bistable
                            ^
Archiving .pio\build\tasmota-teleinfo\lib7bd\libAdafruit_MAX31865-1.1.0-custom
Archiving .pio\build\tasmota-teleinfo\lib94c\libAdafruit_MCP9808_Tasmota.a
Compiling .pio\build\tasmota-teleinfo\libc40\Adafruit_BusIO\Adafruit_I2CDevice.cpp.o
Compiling .pio\build\tasmota-teleinfo\libc40\Adafruit_BusIO\Adafruit_SPIDevice.cpp.o
Compiling .pio\build\tasmota-teleinfo\lib965\Adafruit_PM25AQI-1.0.6\Adafruit_PM25AQI.cpp.o
*** [.pio\build\tasmota-teleinfo\src\tasmota.ino.cpp.o] Error 1
========================================================================================= [FAILED] Took 25.68 seconds =========================================================================================

Environment       Status    Duration
----------------  --------  ------------
tasmota-teleinfo  FAILED    00:00:25.677
==================================================================================== 1 failed, 0 succeeded in 00:00:25.677 ==================================================================================== 

 *  The terminal process "C:\Users\sbouv\.platformio\penv\Scripts\platformio.exe 'run', '--environment', 'tasmota-teleinfo'" terminated with exit code: 1. 
 *  Terminal will be reused by tasks, press any key to close it. 

Qui saurait me dire d'où vient le problème?
Existe-t-il une méthode plus simple pour télécharger le firmware qui demanderait mois de compétences technique que visual studio code & plateformIO?

Merci

@Charles
Bonjour Charles,
Je déterre le sujet car j'avais réussi à créer flow node red pour épurer les données polluées et les intégrer dans Domoticz. Ca fonctionnait avec quelques bug mais globalement je pouvais lire mes données.
Problème : depuis 15 jours mon Wemos Tasmota en V12.1.1.2 ne renvoi plus de trame MQTT le code téléinfo n'arrive plus à traiter ma trame et j'ai ces logs dans la console (dont le code d'erreur buffer overflow)

06:53:53.986 LibTeleinfo::checkLine Err checksum 0x3B != 0x39
06:53:53.987 LibTeleinfo::checkLine Err checksum 0x5B != 0x3E
06:53:53.991 LibTeleinfo::checkLine Err checksum 0x3D != 0x44
06:53:54.243 LibTeleinfo: _recv_idx = 128/128 buffer overflow
06:53:54.490 LibTeleinfo::checkLine Err checksum 0x4F != 0x4C
06:53:54.492 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
06:53:54.498 LibTeleinfo::checkLine Err checksum 0x3D != 0x27
06:53:54.744 LibTeleinfo::checkLine Err checksum 0x25 != 0x28
06:53:54.755 LibTeleinfo::checkLine Err checksum 0x21 != 0x55
06:53:54.996 LibTeleinfo::checkLine Err checksum 0x3B != 0x41
06:53:54.998 LibTeleinfo::checkLine Err checksum 0x5F != 0x24
06:53:54.002 LibTeleinfo::checkLine Err checksum 0x4E != 0x5B
06:53:55.233 LibTeleinfo::checkLine Err checksum 0x56 != 0x58
06:53:55.238 LibTeleinfo::checkLine Err checksum 0x3B != 0x34
06:53:55.501 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF03":0,"EASF07":0,"EASF08":0,"EASF09":0,"EASD02":52518559,"EASD03":0,"EASD04":0,"ERQ3":999393,"ERQ4":5980466,"IRMS1":3,"URMS1":236,"PREF":12,"PCOUP":12,"SINSTS":0,"SMAXSN-1":6796,"CCAIN":12,"STGE":"003A0301","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":85091811,"EASF04":0,"EASF05":0,"EASF10":0,"EASD01":32573252,"EAIT":8244212,"ERQ1":4360930,"ERQ2":136537,"SMAXSN":3766,"CCAIN-1":0,"EASF02":36496683,"SMAXIN-1":4899,"UMOY1":237,"CCASN-1":352,"CCASN":362,"EASF06":0,"SMAXIN":804,"EASF01":48595128,"SINSTI":733}}
06:53:55.738 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
06:53:55.740 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
06:53:55.746 LibTeleinfo::checkLine Err checksum 0x4B != 0x30
06:53:55.993 LibTeleinfo::checkLine Err checksum 0x4A != 0x30
06:53:56.237 LibTeleinfo::checkLine Err checksum 0x3C != 0x41
06:53:56.239 LibTeleinfo::checkLine Err checksum 0x40 != 0x39
06:53:56.243 LibTeleinfo::checkLine Err checksum 0x3B != 0x3E
06:53:56.245 LibTeleinfo::checkLine Err checksum 0x57 != 0x58

J'ai essayé avec la version V12.5.0 et c'est pire le module plante quand je branche la liaison TIC et la conf du Wemos Tasmota saute à chaque fois.
Pour info, j'ai téléchargé le firmware compilé sur ce lien:
https://github.com/Jason2866/Tasmota-specials/blob/firmware/firmware/tasmota/other/tasmota-teleinfo.bin.gz

J'ai remis le Pitinfo sur mon RPI3 pour tester, je lance cette commande

picocom -b 9600 -d 7 -p e -f n /dev/ttyAMA0

j'obtiens ça:

DATE	E230624072123		>
NGTF	      BASE      	<
LTARF	      BASE      	F
EAST	085091803	1
EASF01	048595120	D
EASF02	036496683	P
EASF03	000000000	$
EASF04	000000000	%
EASF05	000000000	&
EASF06	000000000	'
EASF07	000000000	(
EASF08	000000000	)
EASF09	000000000	*
EASF10	000000000	"
EASD01	032573244	>
EASD02	052518559	I
EASD03	000000000	"
EASD04	000000000	#
EAIT	008244172	!
ERQ1	004360930	T
ERQ2	000136522	O
ERQ3	000999325	"
ERQ4	005980440	\
IRMS1	002	0
URMS1	237	F
PREF	12	B
PCOUP	12	\
SINSTS	00455	T
SMAXSN	E230624035413	03766	A
SMAXSN-1	E230623214513	06796	$
SINSTI	00000	<
SMAXIN	E230624000000	00000	Q
SMAXIN-1	E230623132306	04899	[
CCASN	E230624070000	00352	:
CCASN-1	E230624063000	00610	W
CCAIN	E230624070000	00000	&
CCAIN-1	E230624063000	00000	F
UMOY1	E230624072000	236	0
STGE	003A0101	;
MSG1	PAS DE          MESSAGE         	<
PRM	12432850902420	+
RELAIS	000	B
NTARF	01	N
NJOURF	00	&
NJOURF+1	00	B
PJOURF+1	00008001 NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE	9
ADSC	031861721681	9
VTIC	02	J
DATE	E230624072124		?
NGTF	      BASE      	<
LTARF	      BASE      	F
EAST	085091803	1
EASF01	048595120	D
EASF02	036496683	P
EASF03	000000000	$
EASF04	000000000	%
EASF05	000000000	&
EASF06	000000000	'
EASF07	000000000	(
EASF08	000000000	)
EASF09	000000000	*
EASF10	000000000	"
EASD01	032573244	>
EASD02	052518559	I
EASD03	000000000	"
EASD04	000000000	#
EAIT	008244172	!
ERQ1	004360930	T
ERQ2	000136522	O
ERQ3	000999325	"
ERQ4	005980440	\
IRMS1	002	0
URMS1	237	F
PREF	12	B
PCOUP	12	\
SINSTS	00453	R
SMAXSN	E230624035413	03766	A
SMAXSN-1	E230623214513	06796	$
SINSTI	00000	<
SMAXIN	E230624000000	00000	Q
SMAXIN-1	E230623132306	04899	[
CCASN	E230624070000	00352	:
CCASN-1	E230624063000	00610	W
CCAIN	E230624070000	00000	&
CCAIN-1	E230624063000	00000	F
UMOY1	E230624072000	236	0
STGE	003A0101	;
MSG1	PAS DE          MESSAGE         	<
PRM	12432850902420	+
RELAIS	000	B
NTARF	01	N
NJOURF	00	&
NJOURF+1	00	B
PJOURF+1	00008001 NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE	9
ADSC	031861721681	9
VTIC	02	J
DATE	E230624072125		@
NGTF	      BASE      	<
LTARF	      BASE      	F
EAST	085091803	1
EASF01	048595120	D
EASF02	036496683	P
EASF03	000000000	$
EASF04	000000000	%
EASF05	000000000	&
EASF06	000000000	'
EASF07	000000000	(
EASF08	000000000	)
EASF09	000000000	*
EASF10	000000000	"
EASD01	032573244	>
EASD02	052518559	I
EASD03	000000000	"
EASD04	000000000	#
EAIT	008244172	!
ERQ1	004360930	T
ERQ2	000136522	O
ERQ3	000999325	"
ERQ4	005980440	\
IRMS1	002	0
URMS1	237	F
PREF	12	B
PCOUP	12	\
SINSTS	00454	S
SMAXSN	E230624035413	03766	A
SMAXSN-1	E230623214513	06796	$
SINSTI	00000	<
SMAXIN	E230624000000	00000	Q
SMAXIN-1	E230623132306	04899	[
CCASN	E230624070000	00352	:
CCASN-1	E230624063000	00610	W
CCAIN	E230624070000	00000	&
CCAIN-1	E230624063000	00000	F
UMOY1	E230624072000	236	0
STGE	003A0101	;
MSG1	PAS DE          MESSAGE         	<
PRM	12432850902420	+
RELAIS	000	B
NTARF	01	N
NJOURF	00	&
NJOURF+1	00	B
PJOURF+1	00008001 NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE	9
ADSC	031861721681	9
VTIC	02	J
DATE	E230624072126		A
NGTF	      BASE      	<
LTARF	      BASE      	F
EAST	085091803	1
EASF01	048595120	D
EASF02	036496683	P
EASF03	000000000	$
EASF04	000000000	%
EASF05	000000000	&
EASF06	000000000	'
EASF07	000000000	(
EASF08	000000000	)
EASF09	000000000	*
EASF10	000000000	"
EASD01	032573244	>
EASD02	052518559	I
EASD03	000000000	"
EASD04	000000000	#
EAIT	008244172	!
ERQ1	004360930	T
ERQ2	000136522	O
ERQ3	000999325	"
ERQ4	005980441	]
IRMS1	002	0
URMS1	237	F
PREF	12	B
PCOUP	12	\
SINSTS	00456	U
SMAXSN	E230624035413	03766	A
SMAXSN-1	E230623214513	06796	$
SINSTI	00000	<
SMAXIN	E230624000000	00000	Q
SMAXIN-1	E230623132
Terminating...
Skipping tty reset...
Thanks for using picocom

PJOURF+1 indique une valeur étrange?
Je pense que le buffer de réception du tasmota sature et le traitement des données ne peut pas être effectué.
Je viens de te commander le WeMos Teleinfo, on verra si le problème est lié à mon montage mais c'est pas sur... A suivre donc...

@Charles

J'ai galéré mais j'ai finalement réussi à créer un flow node Red pour interpréter la trame MQT émise par tasmota téléinfo en mode standard pour envoyer les infos dans Domoticz.
La trame MQT que je reçois n'est pas exploitable json objet: le noeux json indique des erreurs contenues dans la trame.

J'ai été obligé de cleaner la trame MQT string pour supprimer tous les charactères non supportés avec un msg.payload.replace()

Voici le code de mon flow:

[{"id":"34f140f8.a2bfa","type":"tab","label":"TeleInfo","disabled":false,"info":""},{"id":"e777bc5.9f4d44","type":"comment","z":"34f140f8.a2bfa","name":"Instructions de paramétrage pour domoticz dans l'ESP Tasmota-sensor-Teleinfo il faut activer \"SetOption108 1\"","info":"Dans domoticz:\nCréer le matériel téléinfo en USB pour créer automatiquement les capteurs de mesure\n\nModifier le matériel en dummy pour rendre les capteurs virtuels\nRelever l'IDX de chaque capteur virtuel dans domoticz\n\nDans L'ESP Tasmota:\n\nParamétrer tasmota sensor avec telefinfo et vérifier que les données du compteur sont affichées sur la page web de l'ESP\nConfiguration MQTT: Renseigner Topic= TeleInfo\n\ndans le menu Console:\n\nSaisir la commande setOption108 1\n\n_______________________________\npour info:\n0 = Teleinfo telemetry into Energy MQTT JSON (default)\n1 = Teleinfo raw data only\n_______________________________\n\nVérifier la présence de trames qui commencent par:--> MQT: tele/TeleInfo/RESULT = {...\n\nDans Node-Red:\n\nDans chaque bloc fonction \"Décode Trame...\"\"\nRenseignger l'IDX Domoticz de chaque capteur virtuel associé\nAdapter les infos et les seuils au contrat\n\nDans chaque bloc \"tele/TeleInfo\" et \"mqtt/in\"\nAdapter les paramètres au serveur domtoticz\nDéployer le Flow\n\nDans Domoticz:\n\nVérifier dans les log si les messages MQTT sont bien réceptionnés\nVérifier si les capteurs affichent les données\n","x":410,"y":40,"wires":[]},{"id":"4928abc7.9f50b4","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Total","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nXValue = \"\" + msg.payload.TIC.EASF01 + \";0;0;0;\" + msg.payload.TIC.SINSTS + \";0\";\n\nmsg.payload = {};\nmsg.payload.idx = 69;\nmsg.payload.svalue = XValue;\nreturn msg;\n\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":500,"y":140,"wires":[["566c815d.a5a5d","4e116d.9133ce94"]]},{"id":"566c815d.a5a5d","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":100,"wires":[]},{"id":"4e116d.9133ce94","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":140,"wires":[]},{"id":"a93412bc.bf78d","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":380,"wires":[]},{"id":"ea2010a9.53948","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Charge","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\n//XValue= \"\"+ Math.round((msg.payload.IINST/msg.payload.ISOUSC)*100);\n\nif (msg.payload.TIC.SINSTS>0) {\n    XValue= \"\"+ Math.round((msg.payload.TIC.IRMS1/60)*100);\n}\nelse XValue= \"0\";\n\nmsg.payload = {};\nmsg.payload.idx = 71;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":500,"y":300,"wires":[["3b94d44c.87a34c","f45557f4.05a298"]]},{"id":"f45557f4.05a298","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":300,"wires":[]},{"id":"3b94d44c.87a34c","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":280,"wires":[]},{"id":"91aaccbd.44a7","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Current","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\n\n//XValue= msg.payload.IINST+\";0;0\";\n\nif (msg.payload.TIC.SINSTS>0) {\n    XValue= msg.payload.TIC.IRMS1+\";0;0\";\n}\nelse XValue= \"0;0;0\";\n\nmsg.payload = {};\nmsg.payload.idx = 99;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":500,"y":380,"wires":[["72ded3b2.4e5e1c","a93412bc.bf78d"]]},{"id":"72ded3b2.4e5e1c","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":360,"wires":[]},{"id":"aa682529.bceab8","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":460,"wires":[]},{"id":"3906e2c8.df91ce","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Gestion alerte courant","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nif ((msg.payload.TIC.IRMS1<48 && msg.payload.TIC.SINSTS>0) || msg.payload.TIC.SINSTS<=0) {\n    XValue= \"(1) < 80% de 60A souscrits\";\n}\nelse if (msg.payload.TIC.IRMS1 >= 48 && msg.payload.TIC.IRMS1 < 52 && msg.payload.TIC.SINSTS>0) {\n    XValue= \"(2) >80% et <90% de 60A souscrits\";\n}\nelse XValue= \"(3) >90% de 60A souscrits\";\n\nmsg.payload = {};\nmsg.payload.idx = 73;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":550,"y":460,"wires":[["899a138.e5c52f","aa682529.bceab8"]]},{"id":"899a138.e5c52f","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":440,"wires":[]},{"id":"d6e1107c.8379","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":540,"wires":[]},{"id":"c7d7f48.21e2a08","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Current en Surplus","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\n\n//XValue= msg.payload.IINST+\";0;0\";\n\nif (msg.payload.TIC.SINSTS===0) {\n    XValue= msg.payload.TIC.IRMS1+\";0;0\";\n}\nelse XValue= \"0;0;0\";\n\nmsg.payload = {};\nmsg.payload.idx = 96;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":540,"y":540,"wires":[["54692d1e.95f5a4","d6e1107c.8379"]]},{"id":"54692d1e.95f5a4","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":520,"wires":[]},{"id":"d994fe9.eb362","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame KWh","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nXValue= msg.payload.TIC.SINSTS +\";\"+ msg.payload.TIC.EASF01;\n\nmsg.payload = {};\nmsg.payload.idx = 68;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":500,"y":220,"wires":[["5743d5d0.f6320c","b2fc7f56.9ab89"]]},{"id":"b2fc7f56.9ab89","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":220,"wires":[]},{"id":"5743d5d0.f6320c","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":200,"wires":[]},{"id":"a80552d8.42856","type":"mqtt in","z":"34f140f8.a2bfa","name":"","topic":"tele/TeleInfo/SENSOR/#","qos":"2","datatype":"utf8","broker":"ead0b0c3.e5e6d","nl":false,"rap":false,"inputs":0,"x":140,"y":100,"wires":[["5367159b1760b8b2"]]},{"id":"5e0c7c675c1407c8","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"true","targetType":"full","statusVal":"","statusType":"auto","x":450,"y":100,"wires":[]},{"id":"5367159b1760b8b2","type":"function","z":"34f140f8.a2bfa","name":"Cleaning Trame","func":"// Récupération des données MQT\n//Cleaning de la trame pour pouvoir la passer dans le noeud json\nvar xvalue = {};\nxvalue = msg.payload;\nmsg.payload = xvalue.replace(/\b|\u0004|@|\f|\t|\\\\|\\n/g, '')\nreturn msg;\n\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":140,"y":180,"wires":[["e1a1acc9fbf67ad3"]]},{"id":"e1a1acc9fbf67ad3","type":"json","z":"34f140f8.a2bfa","name":"","property":"payload","action":"","pretty":false,"x":130,"y":280,"wires":[["5e0c7c675c1407c8","4928abc7.9f50b4","d994fe9.eb362","ea2010a9.53948","91aaccbd.44a7","3906e2c8.df91ce","c7d7f48.21e2a08","c221536d537bfda3","26b7916af05ef065"]]},{"id":"26b7916af05ef065","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Total","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nXValue = \"\" + msg.payload.TIC.EAIT + \";0;0;0;\" + msg.payload.TIC.SINSTI + \";0\";\n\nmsg.payload = {};\nmsg.payload.idx = 114;\nmsg.payload.svalue = XValue;\nreturn msg;\n\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":500,"y":620,"wires":[["576532848921fb85","1ad502b556f2e870"]]},{"id":"c221536d537bfda3","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Prod KWh","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nXValue= msg.payload.TIC.SINSTI +\";\"+ msg.payload.TIC.EAIT;\n\nmsg.payload = {};\nmsg.payload.idx = 113;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":510,"y":700,"wires":[["97927f558ccb20a5","a34ae61157ac9378"]]},{"id":"576532848921fb85","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":600,"wires":[]},{"id":"97927f558ccb20a5","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":680,"wires":[]},{"id":"1ad502b556f2e870","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":620,"wires":[]},{"id":"a34ae61157ac9378","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":700,"wires":[]},{"id":"9a37d1dd.66c5a","type":"mqtt-broker","name":"","broker":"localhost","port":"1883","clientid":"","usetls":false,"compatmode":false,"keepalive":"15","cleansession":true,"birthTopic":"","birthQos":"0","birthPayload":"{\"hwid\":\"19\",\"idx\":56,\"nvalue\":0,\"svalue\":\"959\"}","closeTopic":"","closePayload":"","willTopic":"","willQos":"0","willPayload":""},{"id":"ead0b0c3.e5e6d","type":"mqtt-broker","name":"","broker":"192.168.1.200","port":"1883","clientid":"","usetls":false,"compatmode":false,"keepalive":"60","cleansession":true,"birthTopic":"","birthQos":"0","birthPayload":"","closeTopic":"","closeQos":"0","closePayload":"","willTopic":"","willQos":"0","willPayload":""}]

Conclusion:
Soit le problème vient d'erreur dans les échanges entre le linky et le module téléinfo (voir les log plus haut réalisés avec picocom)
Soit le problème vient du code dans tasmota qui envoi des trames MQT avec des charactères incompatibles avec json object (voir aussi plus haut les trames MQT).

Pour le moment ça fonctionne dans l'état mais il y a un problème quelque part...

Je suis dispo four poursuivre des test si besoin pour faire faire progresser le système

A suivre...

@Charles

La trame MQT émise par tasmota téléinfo dépasse la capacité max des messages dans NodeRed qui est limitée par défaut à 1000

On m'a aidé pour augmenter cette valeur dans la configuration de NodeRed:
Editer le fichier settings.js:

sudo nano /home/pi/.node-red/settings.js

augmenter le paramètre:
"debugMaxLength: 2000"

Sauvegarder et relancer NodeRed

La trame affichée en débug s'affiche sous cette forme:

Object:
Topic: "tele/TeleInfo/SENSOR"

Payload: buffer[1454] String

{"TIC":{"EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD04":0,"NJOURF":0,"NJOURF+1":0,"EASF02":36496683,"PRM":2147483647,"RELAIS":0,"NTARF":1,"EASF05":0,"SINSTR06020NRL@XRNH221204190514":9991,"PBNTP02\SINSTS":8512,"DATE":"	<NGTF","EASF10":0,"ADSC":"031861721681","SINSTR02042NRL@XRNH221207100410":7417,"EASF01":"037424628HD@RF02026496683","EASD03":0,"SINSTS00620NRL@XRNH220208194823":10315,"SINSTR04202NRL@XRNH221208195016":10387,"EASD01":"029125668FEASD02044446480","SINSTI":534,"SINSTR00800NRL@XRNH221209123344":7944,"SINSTR04220NRL@XRNH221209123344":7944,"SINSTS06002NRL@XRNH220209194457":8468,"SINSTR04200PRL@XRNH221210104936":13237,"EAIT":"004300868\ERQ2","SINSTS02222NRL@XRNH220210104936":13237,"SINSTR02222NRL@XRNH221211000811":8456,"EASF07":0,"CCAIN":"00000CB@HN0H221212083000","IRMS1":"0100URMS1220>PRDF02BPBNTP02\RHNRTR02284","SMAXIN":0,"PREF":12,"ERQ2":117445,"ERQ3":788456,"ERQ1":"004202002HDRP2000017445","SINSTI":0,"SMAXSN-1":11541,"EAIT":6780905,"ERQ4":"0344URMS1","STGE":"003A0101","EASD04":"#EAIT","CCAIN":0,"PCOUP":12,"EASD02":45505640,"SINSTS":7339,"EAST":74658330,"SMAXIN-1":2623,"CCASN":8484,"CCAIN-1":0,"SMAXSN":11918,"CCASN-1":5768,"UMOY1":211,"VTIC":2,"URMS1":210,"ERQ4":4714036,"LTARF":"      BASE      ","EASD01":29152690,"ERQ1":4312022,"EASF01":38161647,"NGTF":"      BASE      ","EASF06":0,"IRMS1":"200<PREF02BPCNTP02\SHNRTR06233"}}

Par contre elle n'est pas reconnue comme Json object donc les champs ne peuvent pas être récupérés avec une fonction de ce type:

// Récupération des données
//Préparation requête pour Domoticz
var xvalue = {};
xvalue = msg.payload.TIC.SINSTS;
msg.payload = xvalue
return msg;

Le problème semble venir de l'impossibilité d'interpréter les charactères représentés par des  dans plusieurs noms de données comme par exemple:

SINSTR06020NRL@XRNH221204190514

Ces trames apparaissent dans les log que j'ai fait avec le RPI et picocom donc on ne peut pas remettre en cause le cablage du module sur le RPI

Qu'est ce qu'on peut faire?

@Charles
Le format Shield n'existait pas quand j'ai acheté mon premier module téléinfo.
Je n'ai pas pris un shield téléinfo Wemos car j'ai créé ma propre carte sur le standard du modèle pour RPI. et finalement ça m'est utile pour tester facilement avec un RPI et picocom.

Je ne pense pas que mon cablage soit en cause.
Depuis que j'ai reçu le Pitinfo V1.4, j'ai l'impression que les trames sont complètes?

@Charles

J'ai fait les essais.
ESP32 avec pitinfo et passthru check voici les captures d'écrans
je ne sais pas si c'est normal mais c'est impossible de copier coller les trames dans un bloc note.

Même montage avec Tasmota dernière version (toujours sur ESP32)
Les valeurs s'affichent sur la page principale, mais j'ai des erreurs checksum et buffer overflow comme sur le wemos tasmota

19:17:33.182 RSL: SENSOR = {"TIC":{"EAST":73562674,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625402,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4235,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768300,"EASF06":0,"EASF01":37065991,"CCASN":3496}}
19:17:33.400 LibTeleinfo::checkLine Err checksum 0x37 != 0x30
19:17:33.405 LibTeleinfo::checkLine Err checksum 0x41 != 0x2A
19:17:33.656 LibTeleinfo::checkLine Err checksum 0x25 != 0x26
19:17:33.900 LibTeleinfo::checkLine Err checksum 0x53 != 0x56
19:17:33.904 LibTeleinfo::checkLine Err checksum 0x4A != 0x4C
19:17:33.906 LibTeleinfo::checkLine Err checksum 0x4D != 0x44
19:17:33.909 LibTeleinfo::checkLine Err checksum 0x22 != 0x24
19:17:34.149 LibTeleinfo::checkLine Err checksum 0x40 != 0x44
19:17:34.154 LibTeleinfo::checkLine Err checksum 0x53 != 0x30
19:17:34.409 RSL: SENSOR = {"TIC":{"EAST":73562679,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625402,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4235,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768306,"EASF06":0,"EASF01":37065996,"CCASN":3496}}
19:17:34.679 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
19:17:34.680 LibTeleinfo::checkLine Err checksum 0x3B != 0x28
19:17:34.687 LibTeleinfo::checkLine Err checksum 0x40 != 0x48
19:17:34.689 LibTeleinfo::checkLine Err checksum 0x21 != 0x22
19:17:34.929 LibTeleinfo::checkLine Err checksum 0x4C != 0x23
19:17:34.930 LibTeleinfo::checkLine Err checksum 0x55 != 0x56
19:17:34.937 LibTeleinfo::checkLine Err checksum 0x21 != 0x5B
19:17:35.178 LibTeleinfo::checkLine Err checksum 0x4E != 0x29
19:17:35.182 LibTeleinfo::checkLine Err checksum 0x5F != 0x23
19:17:35.184 LibTeleinfo::checkLine Err checksum 0x20 != 0x24
19:17:35.186 LibTeleinfo::checkLine Err checksum 0x37 != 0x2A
19:17:35.707 RSL: SENSOR = {"TIC":{"EAST":73562679,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625402,"IRMS1":18,"URMS1":231,"PREF":12,"PCOUP":12,"SINSTS":4226,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768306,"EASF06":0,"EASF01":37065996,"CCASN":3496}}
19:17:35.771 LibTeleinfo::checkLine Err checksum 0x38 != 0x24
19:17:35.775 LibTeleinfo::checkLine Err checksum 0x40 != 0x29
19:17:35.777 LibTeleinfo::checkLine Err checksum 0x29 != 0x2A
19:17:35.889 LibTeleinfo::checkLine Err checksum 0x5B != 0x22
19:17:35.891 LibTeleinfo::checkLine Err checksum 0x20 != 0x23
19:17:35.892 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
19:17:36.139 LibTeleinfo::checkLine Err checksum 0x42 != 0x43
19:17:36.141 LibTeleinfo::checkLine Err checksum 0x55 != 0x3C
19:17:36.143 LibTeleinfo::checkLine Err checksum 0x48 != 0x4C
19:17:36.388 LibTeleinfo::checkLine Err checksum 0x4E != 0x44
19:17:36.392 LibTeleinfo::checkLine Err checksum 0x5E != 0x44
19:17:36.395 LibTeleinfo::checkLine Err checksum 0x5F != 0x3C
19:17:36.638 LibTeleinfo::checkLine Err checksum 0x24 != 0x26
19:17:36.641 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
19:17:36.652 RSL: SENSOR = {"TIC":{"EAST":73562681,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625402,"IRMS1":18,"URMS1":231,"PREF":12,"PCOUP":12,"SINSTS":4226,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768306,"EASF06":0,"EASF01":37065996,"CCASN":3496}}
19:17:36.715 LibTeleinfo::checkLine Err checksum 0x33 != 0x36
19:17:36.925 LibTeleinfo::checkLine Err checksum 0x40 != 0x30
19:17:36.931 LibTeleinfo::checkLine Err checksum 0x32 != 0x22
19:17:37.175 LibTeleinfo::checkLine Err checksum 0x4C != 0x4F
19:17:37.183 LibTeleinfo::checkLine Err checksum 0x42 != 0x43
19:17:37.427 LibTeleinfo::checkLine Err checksum 0x4B != 0x4C
19:17:37.429 LibTeleinfo::checkLine Err checksum 0x26 != 0x29
19:17:37.434 LibTeleinfo::checkLine Err checksum 0x42 != 0x44
19:17:37.666 LibTeleinfo::checkLine Err checksum 0x25 != 0x2A
19:17:37.988 RSL: SENSOR = {"TIC":{"EAST":73562681,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625403,"IRMS1":18,"URMS1":231,"PREF":12,"PCOUP":12,"SINSTS":4226,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768309,"EASF06":0,"EASF01":37065999,"CCASN":"03486DCCASN0H220202183000"}}
19:17:38.051 LibTeleinfo::checkLine Err checksum 0x45 != 0x46
19:17:38.054 LibTeleinfo::checkLine Err checksum 0x28 != 0x24
19:17:38.058 LibTeleinfo::checkLine Err checksum 0x42 != 0x29
19:17:38.060 LibTeleinfo::checkLine Err checksum 0x28 != 0x2A
19:17:38.071 LibTeleinfo::checkLine Err checksum 0x5F != 0x22
19:17:38.441 LibTeleinfo::checkLine Err checksum 0x31 != 0x43
19:17:38.444 LibTeleinfo::checkLine Err checksum 0x2D != 0x4C
19:17:38.682 LibTeleinfo::checkLine Err checksum 0x44 != 0x29
19:17:38.686 LibTeleinfo::checkLine Err checksum 0x20 != 0x23
19:17:38.687 LibTeleinfo::checkLine Err checksum 0x5F != 0x24
19:17:38.689 LibTeleinfo::checkLine Err checksum 0x44 != 0x2A
19:17:38.701 LibTeleinfo::checkLine Err checksum 0x3E != 0x3F
19:17:38.934 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
19:17:38.949 RSL: SENSOR = {"TIC":{"EAST":73562683,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625403,"IRMS1":18,"URMS1":231,"PREF":12,"PCOUP":12,"SINSTS":4226,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768310,"EASF06":0,"EASF01":37066000,"CCASN":3496}}
19:17:39.168 LibTeleinfo::checkLine Err checksum 0x37 != 0x26
19:17:39.170 LibTeleinfo::checkLine Err checksum 0x25 != 0x27
19:17:39.421 LibTeleinfo::checkLine Err checksum 0x35 != 0x22
19:17:39.422 LibTeleinfo::checkLine Err checksum 0x48 != 0x4B
19:17:39.427 LibTeleinfo::checkLine Err checksum 0x4F != 0x50
19:17:39.670 LibTeleinfo::checkLine Err checksum 0x5C != 0x43
19:17:39.674 LibTeleinfo::checkLine Err checksum 0x5D != 0x4C
19:17:39.920 LibTeleinfo::checkLine Err checksum 0x3C != 0x23
19:17:39.924 LibTeleinfo::checkLine Err checksum 0x41 != 0x44
19:17:40.176 RSL: SENSOR = {"TIC":{"EAST":73562683,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625403,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4226,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768311,"EASF06":0,"EASF01":37066001,"CCASN":3496}}
19:17:40.241 LibTeleinfo::checkLine Err checksum 0x2F != 0x50
19:17:40.401 LibTeleinfo::checkLine Err checksum 0x22 != 0x24
19:17:40.404 LibTeleinfo::checkLine Err checksum 0x43 != 0x29
19:17:40.405 LibTeleinfo::checkLine Err checksum 0x27 != 0x2A
19:17:40.649 LibTeleinfo::checkLine Err checksum 0x58 != 0x22
19:17:40.656 LibTeleinfo::checkLine Err checksum 0x54 != 0x37
19:17:40.657 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
19:17:40.659 LibTeleinfo::checkLine Err checksum 0x5B != 0x5C
19:17:40.902 LibTeleinfo::checkLine Err checksum 0x57 != 0x5B
19:17:40.904 LibTeleinfo::checkLine Err checksum 0x39 != 0x3C
19:17:40.908 LibTeleinfo::checkLine Err checksum 0x3F != 0x44
19:17:40.912 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:17:41.149 LibTeleinfo::checkLine Err checksum 0x49 != 0x32
19:17:41.152 LibTeleinfo::checkLine Err checksum 0x55 != 0x42
19:17:41.409 RSL: SENSOR = {"TIC":{"EAST":73562687,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625403,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4228,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768311,"EASF06":0,"EASF01":37066001,"CCASN":3496}}
19:17:41.474 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
19:17:41.476 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
19:17:41.686 LibTeleinfo::checkLine Err checksum 0x45 != 0x2A
19:17:41.688 LibTeleinfo::checkLine Err checksum 0x5E != 0x22
19:17:41.693 LibTeleinfo::checkLine Err checksum 0x5A != 0x30
19:17:41.939 LibTeleinfo::checkLine Err checksum 0x3A != 0x57
19:17:41.940 LibTeleinfo::checkLine Err checksum 0x3F != 0x43
19:17:41.942 LibTeleinfo::checkLine Err checksum 0x4E != 0x4C
19:17:42.184 LibTeleinfo::checkLine Err checksum 0x41 != 0x44
19:17:42.188 LibTeleinfo::checkLine Err checksum 0x38 != 0x44
19:17:42.436 LibTeleinfo: _recv_idx = 128/128 buffer overflow
19:17:42.439 LibTeleinfo::checkLine Err checksum 0x34 != 0x39
19:17:42.685 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:17:42.689 LibTeleinfo::checkLine Err checksum 0x3F != 0x28
19:17:42.691 LibTeleinfo::checkLine Err checksum 0x26 != 0x29
19:17:43.075 LibTeleinfo::checkLine Err checksum 0x2A != 0x30
19:17:43.083 LibTeleinfo::checkLine Err checksum 0x4F != 0x30
19:17:43.086 LibTeleinfo::checkLine Err checksum 0x59 != 0x5C
19:17:43.088 LibTeleinfo::checkLine Err checksum 0x4B != 0x4D
19:17:43.092 LibTeleinfo::checkLine Err checksum 0x57 != 0x5B
19:17:43.104 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
19:17:43.166 LibTeleinfo::checkLine Err checksum 0x59 != 0x44
19:17:43.418 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:17:43.419 LibTeleinfo::checkLine Err checksum 0x42 != 0x44
19:17:43.422 LibTeleinfo::checkLine Err checksum 0x40 != 0x42
19:17:43.675 RSL: SENSOR = {"TIC":{"EAST":73562688,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625404,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4228,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768315,"EASF06":0,"EASF01":37066005,"CCASN":3496}}
19:17:43.736 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
19:17:43.897 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
19:17:43.901 LibTeleinfo::checkLine Err checksum 0x4C != 0x30
19:17:44.153 LibTeleinfo::checkLine Err checksum 0x25 != 0x41
19:17:44.155 LibTeleinfo::checkLine Err checksum 0x59 != 0x5C
19:17:44.157 LibTeleinfo::checkLine Err checksum 0x4E != 0x51
19:17:44.396 LibTeleinfo::checkLine Err checksum 0x4B != 0x4C
19:17:44.399 LibTeleinfo::checkLine Err checksum 0x4C != 0x44
19:17:44.403 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:17:44.404 LibTeleinfo::checkLine Err checksum 0x40 != 0x44
19:17:44.646 LibTeleinfo::checkLine Err checksum 0x5C != 0x42
19:17:44.906 RSL: SENSOR = {"TIC":{"EAST":73562690,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625404,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4228,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768317,"EASF06":0,"EASF01":37066007,"CCASN":3496}}
19:17:44.965 LibTeleinfo::checkLine Err checksum 0x33 != 0x36
19:17:44.968 LibTeleinfo::checkLine Err checksum 0x40 != 0x30
19:17:45.184 LibTeleinfo::checkLine Err checksum 0x32 != 0x22
19:17:45.191 LibTeleinfo::checkLine Err checksum 0x4C != 0x4F
19:17:45.434 LibTeleinfo::checkLine Err checksum 0x3F != 0x43
19:17:45.437 LibTeleinfo::checkLine Err checksum 0x5B != 0x4C
19:17:45.795 LibTeleinfo::checkLine Err checksum 0x40 != 0x44
19:17:45.796 LibTeleinfo::checkLine Err checksum 0x5F != 0x23
19:17:45.798 LibTeleinfo::checkLine Err checksum 0x3A != 0x44
19:17:45.938 RSL: SENSOR = {"TIC":{"EAST":73562690,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625405,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4228,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768318,"EASF06":0,"EASF01":37066008,"CCASN":3496}}
19:17:46.154 LibTeleinfo::checkLine Err checksum 0x37 != 0x50
19:17:46.156 LibTeleinfo::checkLine Err checksum 0x20 != 0x24
19:17:46.160 LibTeleinfo::checkLine Err checksum 0x48 != 0x30
19:17:46.411 LibTeleinfo::checkLine Err checksum 0x59 != 0x22
19:17:46.419 LibTeleinfo::checkLine Err checksum 0x36 != 0x37
19:17:46.658 LibTeleinfo::checkLine Err checksum 0x57 != 0x5B
19:17:46.664 LibTeleinfo::checkLine Err checksum 0x27 != 0x29

J'espère que les captures vont te permettre d'identifier le problème

@Charles

OK, j'abandonne l'idée des rules, je vais regarder la doc en Berry mais j'ai peur que ça dépasse mes compétences techniques.

Je pense que l'utilisation de node red c'est théoriquement plus simple.

Problème : il ne fonctionne pas à cause (je pense) d'un problème de la trame émise MQT --> Est-ce qu'on pourrait s'assurer que Tasmota fonctionne correctement?

J'utilise Tasmota V12.2.0.2 et j'ai des erreurs dans la console en permanence.

Pour reprendre depuis le début:
Mon compteur est configuré en mode standard, le Pitinfo V1.4 est tout neuf

• Connecté sur un RPI3 : le test picocom reçoit les trames TIC. elles semblent être conformes (voir les trames un peu plus haut dans le post)

• Connecté sur wemos mini d1 tasmota , les données s'affichent
  

La trame MQT est envoyée mais est-ce qu'elle est conforme?

Entre chaque trame MQT je constate beaucoup d'erreurs dans la console
--> est-ce que c'est normale toutes ces erreurs?

19:47:01.520 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44620995,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606767,"IRMS1":10,"URMS1":233,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCASN":5502,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341244,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":2387,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844561,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233}}
19:47:01.752 LibTeleinfo::checkLine Err checksum 0x45 != 0x46
19:47:01.754 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
19:47:01.756 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
19:47:01.762 LibTeleinfo::checkLine Err checksum 0x43 != 0x29
19:47:02.003 LibTeleinfo::checkLine Err checksum 0x27 != 0x2A
19:47:02.009 LibTeleinfo::checkLine Err checksum 0x26 != 0x30
19:47:02.016 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
19:47:02.258 LibTeleinfo::checkLine Err checksum 0x5A != 0x5C
19:47:02.260 LibTeleinfo::checkLine Err checksum 0x54 != 0x55
19:47:02.264 LibTeleinfo::checkLine Err checksum 0x57 != 0x58
19:47:02.265 LibTeleinfo::checkLine Err checksum 0x39 != 0x3C
19:47:02.269 LibTeleinfo::checkLine Err checksum 0x40 != 0x45
19:47:02.503 LibTeleinfo::checkLine Err checksum 0x29 != 0x2F
19:47:02.505 LibTeleinfo::checkLine Err checksum 0x49 != 0x4A
19:47:02.506 LibTeleinfo::checkLine Err checksum 0x54 != 0x32
19:47:02.508 LibTeleinfo::checkLine Err checksum 0x52 != 0x4E
19:47:02.753 LibTeleinfo: _recv_idx = 128/128 buffer overflow
19:47:02.755 LibTeleinfo::checkLine Err checksum 0x34 != 0x39
19:47:02.757 LibTeleinfo::checkLine Err checksum 0x48 != 0x4A
19:47:03.003 LibTeleinfo::checkLine Err checksum 0x47 != 0x4A
19:47:03.007 LibTeleinfo::checkLine Err checksum 0x38 != 0x26
19:47:03.008 LibTeleinfo::checkLine Err checksum 0x24 != 0x27
19:47:03.014 LibTeleinfo::checkLine Err checksum 0x3E != 0x30
19:47:03.260 LibTeleinfo::checkLine Err checksum 0x3E != 0x50
19:47:03.503 LibTeleinfo::checkLine Err checksum 0x53 != 0x58
19:47:03.506 LibTeleinfo::checkLine Err checksum 0x34 != 0x4E
19:47:03.510 LibTeleinfo::checkLine Err checksum 0x3D != 0x2F
19:47:03.514 LibTeleinfo::checkLine Err checksum 0x30 != 0x35
19:47:03.753 LibTeleinfo::checkLine Err checksum 0x3C != 0x31
19:47:03.755 LibTeleinfo::checkLine Err checksum 0x4D != 0x4E
19:47:04.006 LibTeleinfo::checkLine Err checksum 0x4C != 0x50
19:47:04.008 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:47:04.505 LibTeleinfo::checkLine Err checksum 0x59 != 0x5C
19:47:04.507 LibTeleinfo::checkLine Err checksum 0x59 != 0x5B
19:47:04.515 LibTeleinfo::checkLine Err checksum 0x2A != 0x32
19:47:04.517 LibTeleinfo::checkLine Err checksum 0x4D != 0x4E
19:47:04.757 LibTeleinfo::checkLine Err checksum 0x46 != 0x4A
19:47:04.759 LibTeleinfo::checkLine Err checksum 0x33 != 0x35
19:47:05.019 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44620997,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606767,"IRMS1":10,"URMS1":233,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341247,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":2379,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844563,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":"04402DCB@RN0H220129190000"}}
19:47:05.258 LibTeleinfo::checkLine Err checksum 0x2D != 0x2F
19:47:05.260 LibTeleinfo::checkLine Err checksum 0x37 != 0x25
19:47:05.266 LibTeleinfo::checkLine Err checksum 0x2F != 0x30
19:47:05.509 LibTeleinfo::checkLine Err checksum 0x58 != 0x5A
19:47:05.752 LibTeleinfo::checkLine Err checksum 0x4F != 0x30
19:47:05.754 LibTeleinfo::checkLine Err checksum 0x48 != 0x4D
19:47:05.756 LibTeleinfo::checkLine Err checksum 0x58 != 0x32
19:47:05.760 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:05.761 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
19:47:06.003 LibTeleinfo::checkLine Err checksum 0x54 != 0x4A
19:47:06.257 LibTeleinfo::checkLine Err checksum 0x3C != 0x09
19:47:06.259 LibTeleinfo::checkLine Err checksum 0x3B != 0x3C
19:47:06.261 LibTeleinfo::checkLine Err checksum 0x2F != 0x4B
19:47:06.503 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
19:47:06.508 LibTeleinfo::checkLine Err checksum 0x26 != 0x30
19:47:06.516 LibTeleinfo::checkLine Err checksum 0x24 != 0x4B
19:47:06.518 LibTeleinfo::checkLine Err checksum 0x21 != 0x22
19:47:06.757 LibTeleinfo::checkLine Err checksum 0x22 != 0x30
19:47:06.759 LibTeleinfo::checkLine Err checksum 0x21 != 0x22
19:47:06.765 LibTeleinfo::checkLine Err checksum 0x31 != 0x58
19:47:07.005 LibTeleinfo::checkLine Err checksum 0x32 != 0x4E
19:47:07.009 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
19:47:07.010 LibTeleinfo::checkLine Err checksum 0x2C != 0x2F
19:47:07.012 LibTeleinfo::checkLine Err checksum 0x4D != 0x35
19:47:07.506 LibTeleinfo::checkLine Err checksum 0x20 != 0x30
19:47:07.759 LibTeleinfo::checkLine Err checksum 0x32 != 0x22
19:47:07.761 LibTeleinfo::checkLine Err checksum 0x39 != 0x3A
19:47:08.006 LibTeleinfo::checkLine Err checksum 0x20 != 0x5C
19:47:08.009 LibTeleinfo::checkLine Err checksum 0x46 != 0x4D
19:47:08.011 LibTeleinfo::checkLine Err checksum 0x57 != 0x58
19:47:08.014 LibTeleinfo::checkLine Err checksum 0x2C != 0x32
19:47:08.016 LibTeleinfo::checkLine Err checksum 0x4B != 0x4E
19:47:08.258 LibTeleinfo::checkLine Err checksum 0x29 != 0x26
19:47:08.260 LibTeleinfo::checkLine Err checksum 0x2A != 0x2F
19:47:08.264 LibTeleinfo::checkLine Err checksum 0x4A != 0x3F
19:47:08.266 LibTeleinfo::checkLine Err checksum 0x3A != 0x3C
19:47:08.503 LibTeleinfo::checkLine Err checksum 0x24 != 0x26
19:47:08.519 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44620998,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606767,"IRMS1":8,"URMS1":234,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341247,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":1929,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844565,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502}}
19:47:08.755 LibTeleinfo::checkLine Err checksum 0x35 != 0x26
19:47:09.002 LibTeleinfo::checkLine Err checksum 0x4A != 0x4C
19:47:09.008 LibTeleinfo::checkLine Err checksum 0x2A != 0x30
19:47:09.010 LibTeleinfo::checkLine Err checksum 0x25 != 0x24
19:47:09.012 LibTeleinfo::checkLine Err checksum 0x20 != 0x22
19:47:09.258 LibTeleinfo::checkLine Err checksum 0x2C != 0x58
19:47:09.262 LibTeleinfo::checkLine Err checksum 0x32 != 0x4E
19:47:09.266 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
19:47:09.267 LibTeleinfo::checkLine Err checksum 0x2B != 0x2F
19:47:09.503 LibTeleinfo::checkLine Err checksum 0x4A != 0x35
19:47:09.507 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
19:47:09.756 LibTeleinfo::checkLine Err checksum 0x47 != 0x4E
19:47:10.002 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
19:47:10.009 LibTeleinfo::checkLine Err checksum 0x3C != 0x28
19:47:10.011 LibTeleinfo::checkLine Err checksum 0x27 != 0x29
19:47:10.016 LibTeleinfo::checkLine Err checksum 0x4E != 0x32
19:47:10.018 LibTeleinfo::checkLine Err checksum 0x5F != 0x22
19:47:14.515 LibTeleinfo::checkLine Err checksum 0x24 != 0x28
19:47:14.762 LibTeleinfo::checkLine Err checksum 0x28 != 0x50
19:47:15.005 LibTeleinfo::checkLine Err checksum 0x32 != 0x58
19:47:15.009 LibTeleinfo::checkLine Err checksum 0x31 != 0x4E
19:47:15.256 LibTeleinfo::checkLine Err checksum 0x21 != 0x26
19:47:15.258 LibTeleinfo::checkLine Err checksum 0x2E != 0x2F
19:47:15.260 LibTeleinfo::checkLine Err checksum 0x4D != 0x35
19:47:15.514 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44620998,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606768,"IRMS1":8,"URMS1":236,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341250,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":1937,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844566,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502}}
19:47:15.753 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
19:47:15.755 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
19:47:15.760 LibTeleinfo::checkLine Err checksum 0x4C != 0x30
19:47:16.011 LibTeleinfo::checkLine Err checksum 0x59 != 0x5C
19:47:16.013 LibTeleinfo::checkLine Err checksum 0x53 != 0x56
19:47:16.257 LibTeleinfo::checkLine Err checksum 0x31 != 0x32
19:47:16.259 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:16.263 LibTeleinfo::checkLine Err checksum 0x2A != 0x2F
19:47:16.265 LibTeleinfo::checkLine Err checksum 0x47 != 0x4A
19:47:16.504 LibTeleinfo::checkLine Err checksum 0x5C != 0x42
19:47:16.753 LibTeleinfo::checkLine Err checksum 0x4B != 0x4F
19:47:17.001 LibTeleinfo::checkLine Err checksum 0x42 != 0x30
19:47:17.256 LibTeleinfo::checkLine Err checksum 0x3D != 0x5A
19:47:17.267 LibTeleinfo::checkLine Err checksum 0x46 != 0x4D
19:47:17.272 LibTeleinfo::checkLine Err checksum 0x2B != 0x32
19:47:17.502 LibTeleinfo::checkLine Err checksum 0x4B != 0x4E
19:47:17.504 LibTeleinfo::checkLine Err checksum 0x29 != 0x26
19:47:17.508 LibTeleinfo::checkLine Err checksum 0x47 != 0x4A
19:47:17.510 LibTeleinfo::checkLine Err checksum 0x31 != 0x35
19:47:17.772 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44621002,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606768,"IRMS1":8,"URMS1":235,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341252,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":1921,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844569,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502}}
19:47:18.004 LibTeleinfo::checkLine Err checksum 0x23 != 0x30
19:47:18.257 LibTeleinfo::checkLine Err checksum 0x40 != 0x29
19:47:18.265 LibTeleinfo::checkLine Err checksum 0x30 != 0x22
19:47:18.267 LibTeleinfo::checkLine Err checksum 0x21 != 0x23
19:47:18.274 LibTeleinfo::checkLine Err checksum 0x31 != 0x23
19:47:18.276 LibTeleinfo::checkLine Err checksum 0x33 != 0x36
19:47:18.278 LibTeleinfo::checkLine Err checksum 0x43 != 0x44
19:47:18.508 LibTeleinfo::checkLine Err checksum 0x56 != 0x58
19:47:18.514 LibTeleinfo::checkLine Err checksum 0x47 != 0x4E
19:47:18.515 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:18.517 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
19:47:18.753 LibTeleinfo::checkLine Err checksum 0x52 != 0x4A
19:47:19.260 LibTeleinfo::checkLine Err checksum 0x35 != 0x26
19:47:19.267 LibTeleinfo::checkLine Err checksum 0x33 != 0x22
19:47:19.269 LibTeleinfo::checkLine Err checksum 0x38 != 0x3A
19:47:19.513 LibTeleinfo::checkLine Err checksum 0x36 != 0x4D
19:47:24.769 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44621005,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606768,"IRMS1":10,"URMS1":233,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341255,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":2383,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844572,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502}}
19:47:24.773 LibTeleinfo::checkLine Err checksum 0x36 != 0x39
19:47:25.004 LibTeleinfo::checkLine Err checksum 0x37 != 0x25
19:47:25.005 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
19:47:25.011 LibTeleinfo::checkLine Err checksum 0x45 != 0x2A
19:47:25.257 LibTeleinfo::checkLine Err checksum 0x5E != 0x22
19:47:25.503 LibTeleinfo::checkLine Err checksum 0x4A != 0x59
19:47:25.504 LibTeleinfo::checkLine Err checksum 0x49 != 0x4D
19:47:25.506 LibTeleinfo::checkLine Err checksum 0x25 != 0x32
19:47:25.510 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:25.753 LibTeleinfo::checkLine Err checksum 0x52 != 0x4A
19:47:26.003 LibTeleinfo: _recv_idx = 128/128 buffer overflow
19:47:26.004 LibTeleinfo::checkLine Err checksum 0x57 != 0x09
19:47:26.007 LibTeleinfo::checkLine Err checksum 0x2C != 0x4A
19:47:26.257 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
19:47:26.263 LibTeleinfo::checkLine Err checksum 0x3D != 0x27
19:47:26.264 LibTeleinfo::checkLine Err checksum 0x24 != 0x28
19:47:26.270 LibTeleinfo::checkLine Err checksum 0x57 != 0x30
19:47:26.505 LibTeleinfo::checkLine Err checksum 0x29 != 0x50
19:47:26.513 LibTeleinfo::checkLine Err checksum 0x33 != 0x58
19:47:26.755 LibTeleinfo::checkLine Err checksum 0x31 != 0x4E
19:47:26.759 LibTeleinfo::checkLine Err checksum 0x21 != 0x26
19:47:26.761 LibTeleinfo::checkLine Err checksum 0x2E != 0x2F
19:47:26.763 LibTeleinfo::checkLine Err checksum 0x4C != 0x35
19:47:27.259 LibTeleinfo::checkLine Err checksum 0x2D != 0x24
19:47:27.260 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
19:47:27.504 LibTeleinfo::checkLine Err checksum 0x4C != 0x30
19:47:27.752 LibTeleinfo::checkLine Err checksum 0x2F != 0x42
19:47:27.753 LibTeleinfo::checkLine Err checksum 0x59 != 0x5C
19:47:27.755 LibTeleinfo::checkLine Err checksum 0x57 != 0x5A
19:47:27.759 LibTeleinfo::checkLine Err checksum 0x31 != 0x32
19:47:28.002 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:28.006 LibTeleinfo::checkLine Err checksum 0x2A != 0x2F
19:47:28.008 LibTeleinfo::checkLine Err checksum 0x46 != 0x4A
19:47:28.256 LibTeleinfo::checkLine Err checksum 0x5C != 0x42
19:47:28.270 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44621007,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606769,"IRMS1":10,"URMS1":233,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341257,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":2377,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844574,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502}}
19:47:28.502 LibTeleinfo::checkLine Err checksum 0x2D != 0x30
19:47:28.504 LibTeleinfo::checkLine Err checksum 0x40 != 0x30
19:47:28.512 LibTeleinfo::checkLine Err checksum 0x32 != 0x22
19:47:28.757 LibTeleinfo::checkLine Err checksum 0x58 != 0x5A
19:47:29.003 LibTeleinfo::checkLine Err checksum 0x46 != 0x4D
19:47:29.005 LibTeleinfo::checkLine Err checksum 0x58 != 0x32
19:47:29.009 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:29.010 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
19:47:29.257 LibTeleinfo::checkLine Err checksum 0x53 != 0x4A
19:47:29.753 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:47:29.759 LibTeleinfo::checkLine Err checksum 0x3F != 0x28
19:47:29.764 LibTeleinfo::checkLine Err checksum 0x48 != 0x30
19:47:30.005 LibTeleinfo::checkLine Err checksum 0x3C != 0x24
19:47:30.007 LibTeleinfo::checkLine Err checksum 0x2F != 0x30
19:47:30.012 LibTeleinfo::checkLine Err checksum 0x4D != 0x58
19:47:30.258 LibTeleinfo::checkLine Err checksum 0x47 != 0x4E
19:47:30.262 LibTeleinfo::checkLine Err checksum 0x45 != 0x2F
19:47:30.266 LibTeleinfo::checkLine Err checksum 0x30 != 0x35
19:47:30.504 LibTeleinfo::checkLine Err checksum 0x4D != 0x4E
19:47:30.754 LibTeleinfo::checkLine Err checksum 0x2F != 0x31
19:47:30.756 LibTeleinfo::checkLine Err checksum 0x37 != 0x25
19:47:30.758 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
19:47:31.004 LibTeleinfo::checkLine Err checksum 0x2F != 0x30
19:47:31.011 LibTeleinfo::checkLine Err checksum 0x58 != 0x5A
19:47:31.260 LibTeleinfo::checkLine Err checksum 0x5F != 0x4D
19:47:31.266 LibTeleinfo::checkLine Err checksum 0x2B != 0x32
19:47:31.268 LibTeleinfo::checkLine Err checksum 0x47 != 0x4E
19:47:31.270 LibTeleinfo::checkLine Err checksum 0x44 != 0x45
19:47:31.502 LibTeleinfo::checkLine Err checksum 0x46 != 0x2F
19:47:31.508 LibTeleinfo::checkLine Err checksum 0x4D != 0x4E
19:47:31.510 LibTeleinfo::checkLine Err checksum 0x25 != 0x26
19:47:31.766 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44621009,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606769,"IRMS1":11,"URMS1":233,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341259,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":2538,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502,"EASF01":36844576}}
19:47:31.770 LibTeleinfo::checkLine Err checksum 0x3C != 0x09
19:47:31.772 LibTeleinfo::checkLine Err checksum 0x3B != 0x3C
19:47:32.003 LibTeleinfo::checkLine Err checksum 0x25 != 0x4E
19:47:32.005 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
19:47:32.011 LibTeleinfo::checkLine Err checksum 0x26 != 0x30
19:47:32.257 LibTeleinfo::checkLine Err checksum 0x4C != 0x33
19:47:32.265 LibTeleinfo::checkLine Err checksum 0x22 != 0x30
19:47:32.267 LibTeleinfo::checkLine Err checksum 0x23 != 0x24
19:47:32.503 LibTeleinfo::checkLine Err checksum 0x31 != 0x58
19:47:32.504 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
19:47:32.506 LibTeleinfo::checkLine Err checksum 0x31 != 0x32
19:47:32.508 LibTeleinfo::checkLine Err checksum 0x43 != 0x45
19:47:32.512 LibTeleinfo::checkLine Err checksum 0x2A != 0x2F
19:47:32.753 LibTeleinfo::checkLine Err checksum 0x47 != 0x4A
19:47:32.754 LibTeleinfo::checkLine Err checksum 0x2B != 0x26
19:47:33.005 LibTeleinfo::checkLine Err checksum 0x54 != 0x50
19:47:33.257 LibTeleinfo::checkLine Err checksum 0x20 != 0x24
19:47:33.263 LibTeleinfo::checkLine Err checksum 0x48 != 0x30
19:47:33.270 LibTeleinfo::checkLine Err checksum 0x2D != 0x22
19:47:33.505 LibTeleinfo::checkLine Err checksum 0x50 != 0x24
19:47:33.506 LibTeleinfo::checkLine Err checksum 0x2F != 0x30
19:47:33.514 LibTeleinfo::checkLine Err checksum 0x56 != 0x58
19:47:33.755 LibTeleinfo::checkLine Err checksum 0x47 != 0x4E
19:47:33.757 LibTeleinfo::checkLine Err checksum 0x44 != 0x45
19:47:33.759 LibTeleinfo::checkLine Err checksum 0x45 != 0x2F

J'espère que ces infos peuvent t'aider à cibler le problème.
Est-ce que c'est le contenu des données TIC qui provoque ces erreurs?
Mon compteur est mono / tarif base/ avec revente de surplus solaire (injection)

@Charles
le Noeud MQTT in de node red reçoit bien la trame en entier quand l'option energyconfig changed est activée.

trame reçue avec option changed

Quand energyconfig full est activé la trame est tronquée par le noeud MQTT in

--> La limitation semble provenir du noeud MQTT in dans Node red.

Si je colle la trame full dans le noeud inject je la visualise en entier dans un noeud debug msg.payload


Pour compiler mes données pour domoticz j'ai besoin de recevoir les données qui changent mais aussi les autres sur lesquels j'ai des conditions.

Est-ce que tu peux m'aider à créer un Rule dans tamsota pour envoyer une trame mqt: tele/Teleinfo/SENSORperso limitée à ces données:

SINSTS puissance apparante soutirée
EASF01 index comptage soutiré
IRMS1 courant instantané
EAIT index compteur production
SINSTI puissance apparente injectée

Je ne sais pas comment écrire cette rule mais je pense que c'est peut-etre possible et que ça pourrait servir à beaucoup d'entre nous

merci

@Charles

Dans tasmota sur la page https://tasmota.github.io/docs/Teleinfo/#configuring-teleinfo

j'ai vu une option non documentée EnergyConfig Limit

Je cherche à réduire la trame mqt envoyée par tasmota pour pouvoir la lire dans Node Red et traiter les infos qui m'intéressent.

Peux-tu m'indiquer le paramètre pour limiter les infos émises par tasmota à
SINSTS puissance apparante soutirée
EASF01 index comptage soutiré
IRMS1 courant instantané
EAIT index compteur production
SINSTI puissance apparente injectée

Merci

@Charles

La trame MQT émise par le Wemos Tasmota est complète
Je visualise sa valeur avec MQTT explorer (837 caractères)

{"TIC":{"EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"PREF":12,"CCAIN":0,"STGE":"003A0101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","EASF04":0,"EASF05":0,"EASF10":0,"SMAXIN":0,"EASD04":"#EAIT","ERQ2":117250,"SMAXSN-1":5555,"SINSTI":0,"EASD01":"028634536FEASD02044464066","ERQ3":787775,"EAST":73129067,"SINSTR02042NRL@XRNH221125202319":5555,"SMAXSN":6553,"CCASN":1710,"SINSTR02006NRL@XRNH221126025342":4970,"SINSTS":2555,"PCOUP":12,"SMAXIN-1":2583,"DATE":"<NGTF","NGTF":"      BASE      ","EASD02":44477233,"CCAIN-1":0,"EAIT":6777077,"EASF01":"036626228HE@RF02026496683","CCASN-1":3686,"VTIC":2,"ERQ1":4304705,"IRMS1":11,"UMOY1":226,"URMS1":224,"ERQ4":4591690,"EASF01":36632382,"LTARF":"      BASE      ","EASF06":0,"EASD01":28651834}}

Par contre la trame reçue dans le noeud MQTT node red est incomplète:
elle n'affiche que les 501 premiers caractères et il manque les 337 caractères

{"TIC":{"EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"PREF":12,"CCAIN":0,"STGE":"003A0101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","EASF04":0,"EASF05":0,"EASF10":0,"SMAXIN":0,"EASD04":"#EAIT","ERQ2":117250,"SMAXSN-1":5555,"SINSTI":0,"EASD01":"028634536FEASD02044464066","ERQ3":787775,"EAST":73128826,"SINSTR02042NRL@XRNH221125202319":5555,"SMAXSN":6553,"CCASN":1710,"SINSTR02006NRL@XRNH221126025342":497

C'est pour ça que je n'arrive pas à récupérer mes infos.
La trame lue par Node red est incomplète et je ne comprend pas pourquoi

@Charles
Je n'arrive pas à reproduire ton flow et obtenir les infos en debug.
Peux-tu m'envoyer le code de ton flow à coller dans Node red pour pouvoir tester?
Merci

@Charles
Moi aussi je préfèrerai continuer avec nodered.

Voici mon code node red qui fonctionnait quand le linky était en mode historique avec tasmota V9x et téléinfo.
J'avais réussi à bricoler ce flow pour envoyer les données dans domoticz

[{"id":"34f140f8.a2bfa","type":"tab","label":"TeleInfo","disabled":false,"info":""},{"id":"e777bc5.9f4d44","type":"comment","z":"34f140f8.a2bfa","name":"Instructions de paramétrage pour domoticz dans l'ESP Tasmota-sensor-Teleinfo il faut activer \"SetOption108 1\"","info":"Dans domoticz:\nCréer le matériel téléinfo en USB pour créer automatiquement les capteurs de mesure\n\nModifier le matériel en dummy pour rendre les capteurs virtuels\nRelever l'IDX de chaque capteur virtuel dans domoticz\n\nDans L'ESP Tasmota:\n\nParamétrer tasmota sensor avec telefinfo et vérifier que les données du compteur sont affichées sur la page web de l'ESP\nConfiguration MQTT: Renseigner Topic= TeleInfo\n\ndans le menu Console:\n\nSaisir la commande setOption108 1\n\n_______________________________\npour info:\n0 = Teleinfo telemetry into Energy MQTT JSON (default)\n1 = Teleinfo raw data only\n_______________________________\n\nVérifier la présence de trames qui commencent par:--> MQT: tele/TeleInfo/RESULT = {...\n\nDans Node-Red:\n\nDans chaque bloc fonction \"Décode Trame...\"\"\nRenseignger l'IDX Domoticz de chaque capteur virtuel associé\nAdapter les infos et les seuils au contrat\n\nDans chaque bloc \"tele/TeleInfo\" et \"mqtt/in\"\nAdapter les paramètres au serveur domtoticz\nDéployer le Flow\n\nDans Domoticz:\n\nVérifier dans les log si les messages MQTT sont bien réceptionnés\nVérifier si les capteurs affichent les données\n","x":410,"y":40,"wires":[]},{"id":"1b669ddb.c2c732","type":"json","z":"34f140f8.a2bfa","name":"","property":"payload","action":"","pretty":false,"x":230,"y":340,"wires":[["b13a5fad.22bef","ea2010a9.53948","91aaccbd.44a7","3906e2c8.df91ce","c7d7f48.21e2a08","d994fe9.eb362","4928abc7.9f50b4"]]},{"id":"b13a5fad.22bef","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":470,"y":220,"wires":[]},{"id":"4928abc7.9f50b4","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Total","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nXValue= \"\"+ msg.payload.TIC.BASE + \";0;0;0;\" + msg.payload.TIC.PAPP + \";0\";\n\nmsg.payload = {};\nmsg.payload.idx = 69;\nmsg.payload.svalue = XValue;\nreturn msg;\n\n","outputs":1,"noerr":0,"initialize":"","finalize":"","x":500,"y":280,"wires":[["566c815d.a5a5d","4e116d.9133ce94"]]},{"id":"566c815d.a5a5d","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":260,"wires":[]},{"id":"4e116d.9133ce94","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":280,"wires":[]},{"id":"a93412bc.bf78d","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":520,"wires":[]},{"id":"ea2010a9.53948","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Charge","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\n//XValue= \"\"+ Math.round((msg.payload.IINST/msg.payload.ISOUSC)*100);\n\nif (msg.payload.TIC.PAPP>0) {\n    XValue= \"\"+ Math.round((msg.payload.TIC.IINST/msg.payload.TIC.ISOUSC)*100);\n}\nelse XValue= \"0\";\n\nmsg.payload = {};\nmsg.payload.idx = 71;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","x":500,"y":440,"wires":[["3b94d44c.87a34c","f45557f4.05a298"]]},{"id":"f45557f4.05a298","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":440,"wires":[]},{"id":"3b94d44c.87a34c","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":420,"wires":[]},{"id":"91aaccbd.44a7","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Current","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\n\n//XValue= msg.payload.IINST+\";0;0\";\n\nif (msg.payload.TIC.PAPP>0) {\n    XValue= msg.payload.TIC.IINST+\";0;0\";\n}\nelse XValue= \"0;0;0\";\n\nmsg.payload = {};\nmsg.payload.idx = 99;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","x":500,"y":520,"wires":[["72ded3b2.4e5e1c","a93412bc.bf78d"]]},{"id":"72ded3b2.4e5e1c","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":500,"wires":[]},{"id":"b4e3e8af.7a2818","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":600,"wires":[]},{"id":"c9b9361f.3f2328","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame PTEC","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nif (msg.payload.TIC.PTEC==\"HP..\") {\n    XValue= \"(2) Heures Pleines\";\n}\nelse XValue= \"(1) Heures Creuses\";\n\nmsg.payload = {};\nmsg.payload.idx = 72;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","x":500,"y":600,"wires":[["f762a514.7927c8","b4e3e8af.7a2818"]]},{"id":"f762a514.7927c8","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":580,"wires":[]},{"id":"aa682529.bceab8","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":680,"wires":[]},{"id":"3906e2c8.df91ce","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Gestion alerte courant","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nif ((msg.payload.TIC.IINST<48 && msg.payload.PAPP>0) || msg.payload.TIC.PAPP<=0) {\n    XValue= \"(1) < 80% de 60A souscrits\";\n}\nelse if (msg.payload.TIC.IINST>=48 && msg.payload.IINST<52 && msg.payload.TIC.PAPP>0) {\n    XValue= \"(2) >80% et <90% de 60A souscrits\";\n}\nelse XValue= \"(3) >90% de 60A souscrits\";\n\nmsg.payload = {};\nmsg.payload.idx = 73;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","x":550,"y":680,"wires":[["899a138.e5c52f","aa682529.bceab8"]]},{"id":"899a138.e5c52f","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":660,"wires":[]},{"id":"d6e1107c.8379","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":760,"wires":[]},{"id":"c7d7f48.21e2a08","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Current en Surplus","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\n\n//XValue= msg.payload.IINST+\";0;0\";\n\nif (msg.payload.TIC.PAPP===0) {\n    XValue= msg.payload.TIC.IINST+\";0;0\";\n}\nelse XValue= \"0;0;0\";\n\nmsg.payload = {};\nmsg.payload.idx = 96;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","x":540,"y":760,"wires":[["54692d1e.95f5a4","d6e1107c.8379"]]},{"id":"54692d1e.95f5a4","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":740,"wires":[]},{"id":"d994fe9.eb362","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame KWh","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nXValue= msg.payload.TIC.PAPP +\";\"+ msg.payload.TIC.BASE;\n\nmsg.payload = {};\nmsg.payload.idx = 68;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","x":500,"y":360,"wires":[["5743d5d0.f6320c","b2fc7f56.9ab89"]]},{"id":"b2fc7f56.9ab89","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":360,"wires":[]},{"id":"5743d5d0.f6320c","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":340,"wires":[]},{"id":"386fc3a5.7e04fc","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":450,"y":100,"wires":[]},{"id":"a80552d8.42856","type":"mqtt in","z":"34f140f8.a2bfa","name":"","topic":"tele/TeleInfo/SENSOR/#","qos":"2","datatype":"auto","broker":"ead0b0c3.e5e6d","x":120,"y":100,"wires":[["386fc3a5.7e04fc","1b669ddb.c2c732"]]},{"id":"9a37d1dd.66c5a","type":"mqtt-broker","z":"","name":"","broker":"localhost","port":"1883","clientid":"","usetls":false,"compatmode":false,"keepalive":"15","cleansession":true,"birthTopic":"","birthQos":"0","birthPayload":"{\"hwid\":\"19\",\"idx\":56,\"nvalue\":0,\"svalue\":\"959\"}","closeTopic":"","closePayload":"","willTopic":"","willQos":"0","willPayload":""},{"id":"ead0b0c3.e5e6d","type":"mqtt-broker","z":"","name":"","broker":"192.168.1.200","port":"1883","clientid":"","usetls":false,"compatmode":false,"keepalive":"60","cleansession":true,"birthTopic":"","birthQos":"0","birthPayload":"","closeTopic":"","closeQos":"0","closePayload":"","willTopic":"","willQos":"0","willPayload":""}]

Depuis le passage du linky en mode standard et tasmota en V12x mon Flow ne fonctionne plus et je ne comprend pas pourquoi.
J'ai l'impression que le noeud JSON "convert beetween string et object ne fonctionne plus.
Si quelqu'un peut m'aider à le faire fonctionner ou m'indiquer comment extraire autrement.
Il ne me manque plus que ça pour pouvoir récupérer les info du compteur Linky dans domoticz
Merci

@Charles
Autre question pour décoder la trame MQT en mode historique, j'avais créé un flow nodred pour décoder la trame.
Depuis le passage en mode standard je n'arrive plus à décoder la trame car elle semble incomplète ou non reconnue comme un objet json

Est que quelqu'un saurait m'aider à modifier ce flow ou à créer un Rule dans Tamsota pour récupérer directement des les valeurs qui m'intéressent?

Pour le Rule dans un wemos j'ai l'exemple ci dessous qui me permet d'envoyer des sondes de températures à Domoticz

Rule1
on tele-DS18B20-1#Temperature do publish domoticz/in {"idx":105,"svalue":"%value%"} endon
on tele-DS18B20-2#Temperature do publish domoticz/in {"idx":110,"svalue":"%value%"} endon
on tele-DS18B20-3#Temperature do publish domoticz/in {"idx":111,"svalue":"%value%"} endon

Est-ce que quelqu'un a un exemple de Rule pour envoyer le courant , la charge , l'index du compteur?
Merci

@Charles

J'ai rebranché le Pitinfo V1.4 sur mon Wemos mini d1
l'affichage des valeurs est correct:

Par contre voici les logs dans la console:

07:24:11.514 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASF09":0,"EASD02":44429781,"EASD03":0,"EASD04":0,"ERQ3":787284,"ERQ4":4585195,"IRMS1":8,"URMS1":235,"PREF":12,"PCOUP":12,"SINSTS":1752,"SMAXSN-1":9520,"SINSTI":0,"CCAIN":0,"STGE":"003A0101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73058485,"EASF04":0,"EASF05":0,"EASF10":0,"EAIT":6775320,"ERQ1":4303683,"ERQ2":117211,"SMAXSN":4958,"SMAXIN":0,"CCAIN-1":0,"CCASN":3830,"CCASN-1":3794,"SMAXIN-1":3051,"EASD01":28628704,"EASF06":0,"EASF01":36561801,"UMOY1":231}}
07:24:11.754 LibTeleinfo::checkLine Err checksum 0x35 != 0x26
07:24:11.762 LibTeleinfo::checkLine Err checksum 0x33 != 0x22
07:24:11.763 LibTeleinfo::checkLine Err checksum 0x44 != 0x45
07:24:12.011 LibTeleinfo::checkLine Err checksum 0x20 != 0x58
07:24:12.256 LibTeleinfo::checkLine Err checksum 0x5B != 0x51
07:24:12.260 LibTeleinfo::checkLine Err checksum 0x2E != 0x4B
07:24:12.264 LibTeleinfo::checkLine Err checksum 0x21 != 0x26
07:24:12.266 LibTeleinfo::checkLine Err checksum 0x21 != 0x25
07:24:12.267 LibTeleinfo::checkLine Err checksum 0x3A != 0x2A
07:24:14.269 LibTeleinfo::checkLine Err checksum 0x22 != 0x24
07:24:14.503 LibTeleinfo::checkLine Err checksum 0x55 != 0x51
07:24:14.507 LibTeleinfo::checkLine Err checksum 0x2F != 0x4B
07:24:14.511 LibTeleinfo::checkLine Err checksum 0x21 != 0x26
07:24:14.751 LibTeleinfo::checkLine Err checksum 0x20 != 0x25
07:24:14.753 LibTeleinfo::checkLine Err checksum 0x45 != 0x2A
07:24:14.755 LibTeleinfo::checkLine Err checksum 0x3A != 0x3B
07:24:14.757 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
07:24:15.002 LibTeleinfo::checkLine Err checksum 0x38 != 0x39
07:24:15.256 LibTeleinfo::checkLine Err checksum 0x34 != 0x25
07:24:15.258 LibTeleinfo::checkLine Err checksum 0x25 != 0x26
07:24:15.264 LibTeleinfo::checkLine Err checksum 0x43 != 0x2A
07:24:15.266 LibTeleinfo::checkLine Err checksum 0x20 != 0x22
07:24:15.502 LibTeleinfo::checkLine Err checksum 0x20 != 0x23
07:24:15.510 LibTeleinfo::checkLine Err checksum 0x28 != 0x30
07:24:15.512 LibTeleinfo::checkLine Err checksum 0x43 != 0x45
07:24:15.752 LibTeleinfo::checkLine Err checksum 0x43 != 0x3C
07:24:15.754 LibTeleinfo::checkLine Err checksum 0x4C != 0x50
07:24:15.756 LibTeleinfo::checkLine Err checksum 0x50 != 0x3D
07:24:15.760 LibTeleinfo::checkLine Err checksum 0x5E != 0x45
07:24:16.006 LibTeleinfo: _recv_idx = 128/128 buffer overflow
07:24:16.257 LibTeleinfo::checkLine Err checksum 0x4E != 0x43
07:24:16.259 LibTeleinfo::checkLine Err checksum 0x4F != 0x50
07:24:16.502 LibTeleinfo::checkLine Err checksum 0x3D != 0x27
07:24:16.504 LibTeleinfo::checkLine Err checksum 0x25 != 0x28
07:24:16.510 LibTeleinfo::checkLine Err checksum 0x45 != 0x48
07:24:16.518 LibTeleinfo::checkLine Err checksum 0x58 != 0x49
07:24:16.519 LibTeleinfo::checkLine Err checksum 0x5F != 0x21
07:24:16.758 LibTeleinfo::checkLine Err checksum 0x40 != 0x45
07:24:16.760 LibTeleinfo::checkLine Err checksum 0x4E != 0x51
07:24:16.764 LibTeleinfo::checkLine Err checksum 0x25 != 0x4B
07:24:17.004 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
07:24:17.008 LibTeleinfo::checkLine Err checksum 0x56 != 0x2A
07:24:17.272 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASF09":0,"EASD02":44429781,"EASD03":0,"EASD04":0,"ERQ3":787284,"ERQ4":4585196,"IRMS1":7,"URMS1":234,"PREF":12,"PCOUP":12,"SINSTS":1753,"SMAXSN-1":9520,"SINSTI":0,"CCAIN":0,"STGE":"003A0101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73058487,"EASF04":0,"EASF05":0,"EASF10":0,"EAIT":6775320,"ERQ1":4303683,"ERQ2":117211,"SMAXSN":4958,"SMAXIN":0,"CCAIN-1":0,"CCASN":3830,"CCASN-1":3794,"SMAXIN-1":3051,"EASD01":28628706,"EASF06":0,"EASF01":36561804,"UMOY1":231}}
07:24:17.502 LibTeleinfo::checkLine Err checksum 0x45 != 0x46
07:24:17.505 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
07:24:17.507 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
07:24:17.512 LibTeleinfo::checkLine Err checksum 0x43 != 0x29
07:24:17.514 LibTeleinfo::checkLine Err checksum 0x27 != 0x2A
07:24:17.754 LibTeleinfo::checkLine Err checksum 0x5D != 0x22
07:24:18.002 LibTeleinfo::checkLine Err checksum 0x41 != 0x45
07:24:18.004 LibTeleinfo::checkLine Err checksum 0x48 != 0x30
07:24:18.006 LibTeleinfo::checkLine Err checksum 0x4B != 0x50
07:24:18.007 LibTeleinfo::checkLine Err checksum 0x4B != 0x3D
07:24:18.256 LibTeleinfo::checkLine Err checksum 0x3A != 0x45
07:24:18.502 LibTeleinfo: _recv_idx = 128/128 buffer overflow
07:24:18.504 LibTeleinfo::checkLine Err checksum 0x40 != 0x44
07:24:18.754 LibTeleinfo::checkLine Err checksum 0x23 != 0x30
07:24:18.761 LibTeleinfo::checkLine Err checksum 0x47 != 0x48
07:24:19.010 LibTeleinfo::checkLine Err checksum 0x5B != 0x51
07:24:19.257 LibTeleinfo::checkLine Err checksum 0x2E != 0x4B
07:24:19.261 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
07:24:19.263 LibTeleinfo::checkLine Err checksum 0x21 != 0x25
07:24:19.265 LibTeleinfo::checkLine Err checksum 0x3A != 0x2A
07:24:19.755 LibTeleinfo::checkLine Err checksum 0x20 != 0x30
07:24:20.002 LibTeleinfo::checkLine Err checksum 0x40 != 0x29
07:24:20.010 LibTeleinfo::checkLine Err checksum 0x57 != 0x22
07:24:20.011 LibTeleinfo::checkLine Err checksum 0x20 != 0x23
07:24:20.256 LibTeleinfo::checkLine Err checksum 0x32 != 0x36
07:24:20.258 LibTeleinfo::checkLine Err checksum 0x43 != 0x44
07:24:20.265 LibTeleinfo::checkLine Err checksum 0x4D != 0x51
07:24:20.271 LibTeleinfo::checkLine Err checksum 0x44 != 0x4B
07:24:20.273 LibTeleinfo::checkLine Err checksum 0x39 != 0x3D
07:24:20.502 LibTeleinfo::checkLine Err checksum 0x3E != 0x25
07:24:20.506 LibTeleinfo::checkLine Err checksum 0x47 != 0x3B
07:24:20.508 LibTeleinfo::checkLine Err checksum 0x39 != 0x3C
07:24:20.510 LibTeleinfo::checkLine Err checksum 0x24 != 0x26
07:24:20.752 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
07:24:21.002 LibTeleinfo::checkLine Err checksum 0x34 != 0x25
07:24:21.010 LibTeleinfo::checkLine Err checksum 0x42 != 0x2A
07:24:21.012 LibTeleinfo::checkLine Err checksum 0x21 != 0x22
07:24:21.260 LibTeleinfo::checkLine Err checksum 0x20 != 0x23
07:24:21.502 LibTeleinfo::checkLine Err checksum 0x44 != 0x45
07:24:21.504 LibTeleinfo::checkLine Err checksum 0x40 != 0x3C
07:24:21.506 LibTeleinfo::checkLine Err checksum 0x4C != 0x50
07:24:21.508 LibTeleinfo::checkLine Err checksum 0x30 != 0x3D
07:24:21.512 LibTeleinfo::checkLine Err checksum 0x24 != 0x25
07:24:21.752 LibTeleinfo::checkLine Err checksum 0x5F != 0x45
07:24:22.002 LibTeleinfo: _recv_idx = 128/128 buffer overflow
07:24:22.004 LibTeleinfo::checkLine Err checksum 0x44 != 0x46
07:24:22.260 LibTeleinfo::checkLine Err checksum 0x3A != 0x27
07:24:22.262 LibTeleinfo::checkLine Err checksum 0x27 != 0x28
07:24:22.268 LibTeleinfo::checkLine Err checksum 0x45 != 0x48
07:24:22.502 LibTeleinfo::checkLine Err checksum 0x25 != 0x49
07:24:22.504 LibTeleinfo::checkLine Err checksum 0x20 != 0x21
07:24:22.513 LibTeleinfo::checkLine Err checksum 0x40 != 0x45
07:24:22.514 LibTeleinfo::checkLine Err checksum 0x4E != 0x51
07:24:22.752 LibTeleinfo::checkLine Err checksum 0x4F != 0x50
07:24:22.754 LibTeleinfo::checkLine Err checksum 0x47 != 0x4B
07:24:22.755 LibTeleinfo::checkLine Err checksum 0x3D != 0x26
07:24:22.759 LibTeleinfo::checkLine Err checksum 0x24 != 0x2A
07:24:23.260 LibTeleinfo::checkLine Err checksum 0x41 != 0x50
07:24:23.262 LibTeleinfo::checkLine Err checksum 0x23 != 0x24
07:24:23.267 LibTeleinfo::checkLine Err checksum 0x3D != 0x28
07:24:23.502 LibTeleinfo::checkLine Err checksum 0x26 != 0x29
07:24:23.508 LibTeleinfo::checkLine Err checksum 0x33 != 0x48
07:24:23.510 LibTeleinfo::checkLine Err checksum 0x5F != 0x22
07:24:23.517 LibTeleinfo::checkLine Err checksum 0x55 != 0x21
07:24:23.753 LibTeleinfo::checkLine Err checksum 0x40 != 0x43
07:24:23.760 LibTeleinfo::checkLine Err checksum 0x4E != 0x51
07:24:23.762 LibTeleinfo::checkLine Err checksum 0x3A != 0x3C
07:24:23.766 LibTeleinfo::checkLine Err checksum 0x43 != 0x4B
07:24:23.767 LibTeleinfo::checkLine Err checksum 0x38 != 0x3D
07:24:24.002 LibTeleinfo::checkLine Err checksum 0x26 != 0x25
07:24:24.006 LibTeleinfo::checkLine Err checksum 0x47 != 0x3B
07:24:24.256 LibTeleinfo::checkLine Err checksum 0x40 != 0x42
07:24:24.272 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASF09":0,"EASD02":44429781,"EASD03":0,"EASD04":0,"ERQ3":787284,"ERQ4":4585196,"IRMS1":10,"URMS1":234,"PREF":12,"PCOUP":12,"SINSTS":2218,"SMAXSN-1":9520,"SINSTI":0,"CCAIN":0,"STGE":"003A0101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73058491,"EASF04":0,"EASF05":0,"EASF10":0,"EAIT":6775320,"ERQ1":4303683,"ERQ2":117211,"SMAXSN":4958,"SMAXIN":0,"CCAIN-1":0,"CCASN":3830,"CCASN-1":3794,"SMAXIN-1":3051,"EASD01":28628708,"EASF06":0,"EASF01":36561806,"UMOY1":231}}
07:24:24.276 LibTeleinfo::checkLine Err checksum 0x38 != 0x39
07:24:24.503 LibTeleinfo::checkLine Err checksum 0x36 != 0x25
07:24:24.505 LibTeleinfo::checkLine Err checksum 0x24 != 0x26
07:24:24.510 LibTeleinfo::checkLine Err checksum 0x44 != 0x2A
07:24:24.512 LibTeleinfo::checkLine Err checksum 0x5F != 0x22
07:24:24.760 LibTeleinfo::checkLine Err checksum 0x49 != 0x37
07:24:25.002 LibTeleinfo::checkLine Err checksum 0x57 != 0x51
07:24:25.008 LibTeleinfo::checkLine Err checksum 0x45 != 0x4B
07:24:25.010 LibTeleinfo::checkLine Err checksum 0x38 != 0x3D
07:24:25.012 LibTeleinfo::checkLine Err checksum 0x26 != 0x25
07:24:25.256 LibTeleinfo::checkLine Err checksum 0x47 != 0x3B
07:24:25.258 LibTeleinfo::checkLine Err checksum 0x29 != 0x26
07:24:25.260 LibTeleinfo::checkLine Err checksum 0x40 != 0x42
07:24:25.503 LibTeleinfo::checkLine Err checksum 0x56 != 0x48
07:24:25.505 LibTeleinfo::checkLine Err checksum 0x4E != 0x50
07:24:25.754 LibTeleinfo::checkLine Err checksum 0x3D != 0x27
07:24:25.756 LibTeleinfo::checkLine Err checksum 0x25 != 0x28
07:24:25.761 LibTeleinfo::checkLine Err checksum 0x45 != 0x48
07:24:26.002 LibTeleinfo::checkLine Err checksum 0x59 != 0x49
07:24:26.004 LibTeleinfo::checkLine Err checksum 0x5E != 0x21
07:24:26.012 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
07:24:26.014 LibTeleinfo::checkLine Err checksum 0x4D != 0x51
07:24:26.256 LibTeleinfo::checkLine Err checksum 0x2E != 0x4B
07:24:26.261 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
07:24:26.264 LibTeleinfo::checkLine Err checksum 0x38 != 0x2A
07:24:26.753 LibTeleinfo::checkLine Err checksum 0x37 != 0x30
07:24:27.002 LibTeleinfo::checkLine Err checksum 0x41 != 0x2A
07:24:27.004 LibTeleinfo::checkLine Err checksum 0x21 != 0x22
07:24:27.009 LibTeleinfo::checkLine Err checksum 0x20 != 0x23
07:24:27.256 LibTeleinfo::checkLine Err checksum 0x48 != 0x4C
07:24:27.260 LibTeleinfo::checkLine Err checksum 0x40 != 0x3C
07:24:27.262 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
07:24:27.264 LibTeleinfo::checkLine Err checksum 0x2F != 0x3D
07:24:27.502 LibTeleinfo::checkLine Err checksum 0x24 != 0x25
07:24:27.504 LibTeleinfo::checkLine Err checksum 0x40 != 0x45
07:24:27.510 LibTeleinfo::checkLine Err checksum 0x54 != 0x30
07:24:28.004 LibTeleinfo::checkLine Err checksum 0x35 != 0x50
07:24:28.006 LibTeleinfo::checkLine Err checksum 0x23 != 0x24
07:24:28.011 LibTeleinfo::checkLine Err checksum 0x3E != 0x28
07:24:28.013 LibTeleinfo::checkLine Err checksum 0x26 != 0x29
07:24:28.019 LibTeleinfo::checkLine Err checksum 0x38 != 0x48
07:24:28.257 LibTeleinfo::checkLine Err checksum 0x5F != 0x22
07:24:28.265 LibTeleinfo::checkLine Err checksum 0x57 != 0x21
07:24:28.503 LibTeleinfo::checkLine Err checksum 0x56 != 0x51
07:24:28.507 LibTeleinfo::checkLine Err checksum 0x50 != 0x4B
07:24:28.511 LibTeleinfo::checkLine Err checksum 0x20 != 0x25
07:24:28.515 LibTeleinfo::checkLine Err checksum 0x26 != 0x2A
07:24:28.753 LibTeleinfo::checkLine Err checksum 0x39 != 0x3B
07:24:28.755 LibTeleinfo::checkLine Err checksum 0x4B != 0x2B
07:24:28.757 LibTeleinfo::checkLine Err checksum 0x3F != 0x42
07:24:29.003 LibTeleinfo::checkLine Err checksum 0x38 != 0x39
07:24:29.007 LibTeleinfo::checkLine Err checksum 0x35 != 0x25
07:24:29.256 LibTeleinfo::checkLine Err checksum 0x25 != 0x26
07:24:29.262 LibTeleinfo::checkLine Err checksum 0x44 != 0x2A
07:24:29.264 LibTeleinfo::checkLine Err checksum 0x5F != 0x22
07:24:36.512 LibTeleinfo::checkLine Err checksum 0x4F != 0x4B
07:24:36.754 LibTeleinfo::checkLine Err checksum 0x21 != 0x26
07:24:36.756 LibTeleinfo::checkLine Err checksum 0x20 != 0x25
07:24:36.757 LibTeleinfo::checkLine Err checksum 0x45 != 0x2A
07:24:36.759 LibTeleinfo::checkLine Err checksum 0x3A != 0x3B
07:24:36.760 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
07:24:37.018 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASF09":0,"EASD02":44429781,"EASD03":0,"EASD04":0,"ERQ3":787284,"ERQ4":4585197,"IRMS1":10,"URMS1":234,"PREF":12,"PCOUP":12,"SINSTS":2234,"SMAXSN-1":9520,"SINSTI":0,"CCAIN":0,"STGE":"003A0101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73058497,"EASF04":0,"EASF05":0,"EASF10":0,"EAIT":6775320,"ERQ1":4303683,"ERQ2":117211,"SMAXSN":4958,"SMAXIN":0,"CCAIN-1":0,"CCASN":3830,"CCASN-1":3794,"SMAXIN-1":3051,"EASD01":28628715,"EASF06":0,"EASF01":36561813,"UMOY1":231}}
07:24:37.022 LibTeleinfo::checkLine Err checksum 0x38 != 0x39
07:24:37.257 LibTeleinfo::checkLine Err checksum 0x35 != 0x25
07:24:37.259 LibTeleinfo::checkLine Err checksum 0x25 != 0x26
07:24:37.265 LibTeleinfo::checkLine Err checksum 0x44 != 0x2A
07:24:37.267 LibTeleinfo::checkLine Err checksum 0x5F != 0x22
07:24:37.512 LibTeleinfo::checkLine Err checksum 0x2A != 0x50
07:24:37.752 LibTeleinfo::checkLine Err checksum 0x42 != 0x45
07:24:37.754 LibTeleinfo::checkLine Err checksum 0x48 != 0x30
07:24:37.756 LibTeleinfo::checkLine Err checksum 0x4B != 0x50
07:24:37.757 LibTeleinfo::checkLine Err checksum 0x51 != 0x3D
07:24:38.002 LibTeleinfo::checkLine Err checksum 0x31 != 0x45
07:24:38.256 LibTeleinfo: _recv_idx = 128/128 buffer overflow
07:24:38.259 LibTeleinfo::checkLine Err checksum 0x5D != 0x45
07:24:38.261 LibTeleinfo::checkLine Err checksum 0x4F != 0x50
07:24:38.506 LibTeleinfo::checkLine Err checksum 0x3D != 0x27
07:24:38.508 LibTeleinfo::checkLine Err checksum 0x25 != 0x28
07:24:38.513 LibTeleinfo::checkLine Err checksum 0x45 != 0x48
07:24:38.754 LibTeleinfo::checkLine Err checksum 0x59 != 0x49
07:24:38.756 LibTeleinfo::checkLine Err checksum 0x5F != 0x21
07:24:38.764 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
07:24:38.766 LibTeleinfo::checkLine Err checksum 0x4D != 0x51
07:24:39.002 LibTeleinfo::checkLine Err checksum 0x24 != 0x4B
07:24:39.006 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
07:24:39.010 LibTeleinfo::checkLine Err checksum 0x57 != 0x2A
07:24:39.504 LibTeleinfo::checkLine Err checksum 0x3A != 0x3C
07:24:39.507 LibTeleinfo::checkLine Err checksum 0x37 != 0x25
07:24:39.508 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
07:24:39.754 LibTeleinfo::checkLine Err checksum 0x4E != 0x30
07:24:39.762 LibTeleinfo::checkLine Err checksum 0x55 != 0x56
07:24:40.003 LibTeleinfo::checkLine Err checksum 0x49 != 0x31
07:24:40.005 LibTeleinfo::checkLine Err checksum 0x2B != 0x51
07:24:40.008 LibTeleinfo::checkLine Err checksum 0x2F != 0x4B
07:24:40.256 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
07:24:40.258 LibTeleinfo::checkLine Err checksum 0x24 != 0x25
07:24:40.260 LibTeleinfo::checkLine Err checksum 0x39 != 0x2A
07:24:40.505 LibTeleinfo::checkLine Err checksum 0x34 != 0x39
07:24:40.507 LibTeleinfo::checkLine Err checksum 0x38 != 0x09
07:24:40.509 LibTeleinfo::checkLine Err checksum 0x3B != 0x3C
07:24:40.753 LibTeleinfo::checkLine Err checksum 0x44 != 0x50
07:24:40.754 LibTeleinfo::checkLine Err checksum 0x20 != 0x24
07:24:40.760 LibTeleinfo::checkLine Err checksum 0x29 != 0x30
07:24:41.003 LibTeleinfo::checkLine Err checksum 0x55 != 0x22
07:24:41.011 LibTeleinfo::checkLine Err checksum 0x36 != 0x37
07:24:41.258 LibTeleinfo::checkLine Err checksum 0x2B != 0x51
07:24:41.261 LibTeleinfo::checkLine Err checksum 0x22 != 0x3D
07:24:41.265 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
07:24:41.267 LibTeleinfo::checkLine Err checksum 0x42 != 0x45
07:24:42.504 LibTeleinfo::checkLine Err checksum 0x3A != 0x3D
07:24:42.505 LibTeleinfo::checkLine Err checksum 0x24 != 0x26
07:24:42.507 LibTeleinfo::checkLine Err checksum 0x3A != 0x45
07:24:43.256 LibTeleinfo::checkLine Err checksum 0x2C != 0x2A
07:24:43.266 LibTeleinfo::checkLine Err checksum 0x54 != 0x56
07:24:43.502 LibTeleinfo::checkLine Err checksum 0x47 != 0x45
07:24:43.504 LibTeleinfo::checkLine Err checksum 0x51 != 0x50
07:24:43.508 LibTeleinfo::checkLine Err checksum 0x39 != 0x3D
07:24:43.752 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
07:24:43.754 LibTeleinfo::checkLine Err checksum 0x3A != 0x45
07:24:44.002 LibTeleinfo::checkLine Err checksum 0x22 != 0x09
07:24:44.004 LibTeleinfo::checkLine Err checksum 0x3B != 0x3C
07:24:44.256 LibTeleinfo::checkLine Err checksum 0x24 != 0x48
07:24:44.258 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
07:24:44.264 LibTeleinfo::checkLine Err checksum 0x46 != 0x30
07:24:44.502 LibTeleinfo::checkLine Err checksum 0x33 != 0x48
07:24:44.510 LibTeleinfo::checkLine Err checksum 0x59 != 0x30
07:24:44.752 LibTeleinfo::checkLine Err checksum 0x5A != 0x51
07:24:44.756 LibTeleinfo::checkLine Err checksum 0x2E != 0x4B
07:24:44.760 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
07:24:44.762 LibTeleinfo::checkLine Err checksum 0x23 != 0x25
07:24:45.002 LibTeleinfo::checkLine Err checksum 0x3A != 0x2A
07:24:45.268 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASF09":0,"EASD02":44429781,"EASD03":0,"EASD04":0,"ERQ3":787284,"ERQ4":4585198,"IRMS1":9,"URMS1":234,"PREF":12,"PCOUP":12,"SINSTS":2220,"SMAXSN-1":9520,"SINSTI":0,"CCAIN":0,"STGE":"003A0101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73058501,"EASF04":0,"EASF05":0,"EASF10":0,"EAIT":6775320,"ERQ1":4303683,"ERQ2":117211,"SMAXSN":4958,"SMAXIN":0,"CCAIN-1":0,"CCASN":3830,"CCASN-1":3794,"SMAXIN-1":3051,"EASD01":28628720,"EASF06":0,"EASF01":36561818,"UMOY1":231}}
07:24:45.275 LibTeleinfo::checkLine Err checksum 0x37 != 0x30
07:24:45.508 LibTeleinfo::checkLine Err checksum 0x41 != 0x2A
07:24:45.516 LibTeleinfo::checkLine Err checksum 0x22 != 0x23
07:24:45.756 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
07:24:45.760 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
07:24:46.004 LibTeleinfo::checkLine Err checksum 0x39 != 0x3D
07:24:46.006 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
07:24:46.008 LibTeleinfo::checkLine Err checksum 0x3A != 0x45
07:24:46.503 LibTeleinfo::checkLine Err checksum 0x3A != 0x50
07:24:46.505 LibTeleinfo::checkLine Err checksum 0x34 != 0x25
07:24:46.752 LibTeleinfo::checkLine Err checksum 0x42 != 0x2A
07:24:46.754 LibTeleinfo::checkLine Err checksum 0x21 != 0x22
07:24:46.760 LibTeleinfo::checkLine Err checksum 0x20 != 0x23
07:24:47.002 LibTeleinfo::checkLine Err checksum 0x2C != 0x30
07:24:47.004 LibTeleinfo::checkLine Err checksum 0x43 != 0x45
07:24:47.006 LibTeleinfo::checkLine Err checksum 0x42 != 0x3C
07:24:47.008 LibTeleinfo::checkLine Err checksum 0x4C != 0x50
07:24:47.010 LibTeleinfo::checkLine Err checksum 0x2F != 0x3D
07:24:47.256 LibTeleinfo::checkLine Err checksum 0x5F != 0x45
07:24:47.502 LibTeleinfo: _recv_idx = 128/128 buffer overflow
07:24:47.752 LibTeleinfo::checkLine Err checksum 0x28 != 0x24
07:24:47.762 LibTeleinfo::checkLine Err checksum 0x43 != 0x2A
07:24:47.763 LibTeleinfo::checkLine Err checksum 0x5F != 0x22
07:24:48.003 LibTeleinfo::checkLine Err checksum 0x20 != 0x23
07:24:48.011 LibTeleinfo::checkLine Err checksum 0x2C != 0x30
07:24:48.013 LibTeleinfo::checkLine Err checksum 0x43 != 0x45
07:24:48.257 LibTeleinfo::checkLine Err checksum 0x43 != 0x3C
07:24:48.259 LibTeleinfo::checkLine Err checksum 0x4C != 0x50
07:24:48.261 LibTeleinfo::checkLine Err checksum 0x30 != 0x3D
07:24:48.266 LibTeleinfo::checkLine Err checksum 0x5E != 0x45
07:24:48.507 LibTeleinfo: _recv_idx = 128/128 buffer overflow
07:24:49.002 LibTeleinfo::checkLine Err checksum 0x37 != 0x26
07:24:49.004 LibTeleinfo::checkLine Err checksum 0x25 != 0x27
07:24:49.009 LibTeleinfo::checkLine Err checksum 0x35 != 0x22
07:24:49.011 LibTeleinfo::checkLine Err checksum 0x43 != 0x46
07:24:49.266 LibTeleinfo::checkLine Err checksum 0x40 != 0x45
07:24:49.270 LibTeleinfo::checkLine Err checksum 0x5D != 0x50
07:24:49.502 LibTeleinfo::checkLine Err checksum 0x3F != 0x26
07:24:49.506 LibTeleinfo::checkLine Err checksum 0x41 != 0x45
07:24:50.003 LibTeleinfo::checkLine Err checksum 0x39 != 0x50
07:24:50.005 LibTeleinfo::checkLine Err checksum 0x22 != 0x24
07:24:50.011 LibTeleinfo::checkLine Err checksum 0x3E != 0x28
07:24:50.012 LibTeleinfo::checkLine Err checksum 0x26 != 0x29
07:24:50.260 LibTeleinfo::checkLine Err checksum 0x3A != 0x48
07:24:50.262 LibTeleinfo::checkLine Err checksum 0x5E != 0x22
07:24:50.269 LibTeleinfo::checkLine Err checksum 0x58 != 0x21
07:24:50.503 LibTeleinfo::checkLine Err checksum 0x57 != 0x51
07:24:50.509 LibTeleinfo::checkLine Err checksum 0x46 != 0x4B
07:24:50.752 LibTeleinfo::checkLine Err checksum 0x33 != 0x25
07:24:50.756 LibTeleinfo::checkLine Err checksum 0x26 != 0x2A
07:24:50.758 LibTeleinfo::checkLine Err checksum 0x39 != 0x3B
07:24:50.760 LibTeleinfo::checkLine Err checksum 0x3C != 0x2B
07:24:50.761 LibTeleinfo::checkLine Err checksum 0x3F != 0x42
07:24:51.005 LibTeleinfo::checkLine Err checksum 0x45 != 0x46
07:24:51.258 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
07:24:51.260 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
07:24:51.265 LibTeleinfo::checkLine Err checksum 0x43 != 0x29
07:24:51.266 LibTeleinfo::checkLine Err checksum 0x27 != 0x2A
07:24:51.272 LibTeleinfo::checkLine Err checksum 0x25 != 0x30
07:24:51.509 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
07:24:51.511 LibTeleinfo::checkLine Err checksum 0x5A != 0x5C
07:24:51.512 LibTeleinfo::checkLine Err checksum 0x4F != 0x50
07:24:51.516 LibTeleinfo::checkLine Err checksum 0x4C != 0x51
07:24:51.753 LibTeleinfo::checkLine Err checksum 0x39 != 0x3C
07:24:51.757 LibTeleinfo::checkLine Err checksum 0x38 != 0x3D
07:24:51.761 LibTeleinfo::checkLine Err checksum 0x21 != 0x25
07:24:51.763 LibTeleinfo::checkLine Err checksum 0x44 != 0x45
07:24:51.764 LibTeleinfo::checkLine Err checksum 0x4B != 0x32
07:24:52.003 LibTeleinfo::checkLine Err checksum 0x54 != 0x42
07:24:52.257 LibTeleinfo::checkLine Err checksum 0x34 != 0x39
07:24:52.259 LibTeleinfo::checkLine Err checksum 0x48 != 0x4A
07:24:52.261 LibTeleinfo::checkLine Err checksum 0x41 != 0x44
07:24:52.265 LibTeleinfo::checkLine Err checksum 0x38 != 0x26
07:24:52.503 LibTeleinfo::checkLine Err checksum 0x24 != 0x27
07:24:52.509 LibTeleinfo::checkLine Err checksum 0x3F != 0x30
07:24:52.516 LibTeleinfo::checkLine Err checksum 0x47 != 0x49
07:24:52.761 LibTeleinfo::checkLine Err checksum 0x46 != 0x45
07:24:52.767 LibTeleinfo::checkLine Err checksum 0x4C != 0x50
07:24:52.769 LibTeleinfo::checkLine Err checksum 0x4A != 0x4B
07:24:53.002 LibTeleinfo::checkLine Err checksum 0x52 != 0x26
07:24:53.006 LibTeleinfo::checkLine Err checksum 0x41 != 0x45
07:24:53.008 LibTeleinfo::checkLine Err checksum 0x28 != 0x2A
07:24:53.272 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASF09":0,"EASD02":44429781,"EASD03":0,"EASD04":0,"ERQ3":787284,"ERQ4":4585198,"IRMS1":10,"URMS1":230,"PREF":12,"PCOUP":12,"SINSTS":2203,"SMAXSN-1":9520,"SINSTI":0,"CCAIN":0,"STGE":"003A0101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73058505,"EASF04":0,"EASF05":0,"EASF10":0,"EAIT":6775320,"ERQ1":4303683,"ERQ2":117211,"SMAXSN":4958,"SMAXIN":0,"CCAIN-1":0,"CCASN":3830,"CCASN-1":3794,"SMAXIN-1":3051,"EASD01":28628724,"EASF06":0,"EASF01":36561822,"UMOY1":231}}

La trame MQT: tele/TeleInfo/SENSOR me semble complète mais libTeleinfo indique toujours des erreurs de type
LibTeleinfo: _recv_idx = 128/128 buffer overflow
LibTeleinfo::checkLine Err checksum

Est-ce que tu sais de quoi ça peut provenir?