Tasmota sensor 12.1.1.2 avec linky mode Standard --> Libteleinfo checkline error checksum...

Samquad

@Charles
Je possède le Pitinfo V1.3 (photo prise avant modif de résistance):

J'avais des erreurs checksum dans cette configuration avec le mode standard du linky.

j'ai changé les résistances comme préconisé sur le site tasmota à cette adresse:
https://tasmota.github.io/docs/Teleinfo/#optional-enable-pin

J'ai toujours des erreurs checksum
Est-ce que j'ai remplacé les bonnes résistance pour modifier mon Pitinfo en V1.3a?

J'ai soudé des résistances std car je n'ai pas de résistances cms et pas de matériel adapté.
Je peux faire des tests de changement de résistances.
Je peux plus facilement réduire R3 (en soudant une résistance en // sur celle en place qui mesure 220 ohms).
Quelle valeur faudrait-il tester?

Charles

@Samquad Ok je comprends mieux, oui c'est les bonnes mais R3 était déjà en 220Ohm (221) donc rien à y faire pour le moment, ce qui est intéressant c'est que R1 était en 4K7 et ça fonctionnait pas (j'allais te proposer cette conf du coups inutile), donc peut être la passer à 10K (sans garantie). En fait tu as descendu R1 et dans ton cas il faut l'augmenter.

Sinon pour faire simple tu laisses R1 à 3.3K et tu descends R3 à 100ohm si pas mieux 50ohm (enfin tu vois le principe) tu peux même la court circuiter au pire et mettre une 0 Ohm pour voir, si là ça fonctionne pas y'a un hic

tu as beaucoup de cable entre ton linky et le module ?

Samquad

@Charles
Entre le compteur et le Pitinfo: j'ai 30 cm de cable 0.75mm².
Je vais tester sur R3 en baissant sa valeur.
Avant de tester tu peux me confirmer que je compile correctement:

J'utilise Visual studio code avec plateformIO et les dernieres sources sur
https://tasmota.github.io/docs/PlatformIO/#download-tasmota
J'active l'option teleinfo dans le fichier my_user_config.h et je clique sur Build dans le dossier tasmota-sensors

Est-ce que tu peux m'envoyer la dernière version du firmware tasmota sensor avec téléinfo pour que j'essaye de remplacer le firmware de mon wemos mini d1?

Charles

@Samquad oui je pense que c'est ça, mais tu sais, tu n'as pas besoin de compiler, tu trouveras les FW téléinfo sur le site des FW non officiels ici dans le dossier firmware tu as la version teleinfo pour tous les types d'ESP (ESP32, ESP8266 et autres

Cerise sur le gateau, c'est rebuild a chaque PR mergée

Samquad

@Charles
Merci pour l'info sur le lien.
J'ai dessoudé R3 et la piste du circuit imprimé n'a pas résistée
J'ai soudé un fil pour rétablir la continuité vers la borne de gauche:

J'ai fait plusieurs essais:
R3 = 0 ohm j'ai ces log dans la console:

17:12:59.262 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":228,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:00.501 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
17:13:01.255 LibTeleinfo::checkLine Err checksum 0x48 != 0x20
17:13:01.501 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
17:13:02.260 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:02.752 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:03.756 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:04.502 LibTeleinfo::checkLine Err checksum 0x2E != 0x36
17:13:05.259 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:06.255 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:06.261 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:07.502 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:07.508 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:08.002 LibTeleinfo::checkLine Err checksum 0x2E != 0x36
17:13:08.502 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:09.257 LibTeleinfo::checkLine Err checksum 0x4D != 0x55
17:13:09.506 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:09.509 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:10.257 LibTeleinfo::checkLine Err checksum 0x2B != 0x33
17:13:12.002 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
17:13:12.008 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":231,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:13.020 LibTeleinfo::checkLine Err checksum 0x24 != 0x40
17:13:13.022 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:13.256 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:14.260 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":231,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:14.502 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:15.005 LibTeleinfo::checkLine Err checksum 0x34 != 0x3C
17:13:15.529 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":231,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:15.752 LibTeleinfo::checkLine Err checksum 0x42 != 0x4A

R3 = 50 ohms j'ai ces log dans la console:

16:58:47.269 MQT: tele/TeleInfo/SENSOR = {"TIC":{"EAIT":6730889,"VTIC":2,"EASD02":43525417,"ERQ3":780254,"EASD03":0,"ERQ4":4447898,"IRMS1":12,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"EASF10":0,"EASF06":0,"ERQ2":115942,"EASF03":0,"URMS1":232,"PREF":12,"ADSC":"031861721681","EAST":71749392,"ERQ1":4296047,"PCOUP":12,"CCASN":2728,"SINSTS":1508,"SIAXIN)1":2791,"EASF09":0,"NJOURF+1":0,"EASF02":36496683,"EASF07":0,"EASF04":0,"EASD01":28223966,"EASF08":0,"EASF05":0,"QIOY1":234,"EASD04":0,"PRM":2147483647,"AASF01":0,"CCAIN":0,"":")1","EASF01":35252706,"
16:58:47.273 LibTeleinfo::checkLine Err checksum 0x4D != 0x53
16:58:47.503 LibTeleinfo::checkLine Err checksum 0x27 != 0x2B
16:58:47.507 LibTeleinfo: _recv_idx = 128/128 buffer overflow
16:58:47.753 LibTeleinfo::checkLine Err checksum 0x3E != 0x46
16:58:47.755 LibTeleinfo::checkLine Err checksum 0x21 != 0x25
16:58:48.003 LibTeleinfo::checkLine Err checksum 0x26 != 0x2A
16:58:48.004 LibTeleinfo::checkLine Err checksum 0x57 != 0x23
16:58:48.257 LibTeleinfo::checkLine Err checksum 0x39 != 0x41
16:58:48.259 LibTeleinfo::checkLine Err checksum 0x3E != 0x42
16:58:48.265 LibTeleinfo::checkLine Err checksum 0x37 != 0x3B
16:58:48.267 LibTeleinfo::checkLine Err checksum 0x42 != 0x3F
16:58:48.503 LibTeleinfo: _recv_idx = 128/128 buffer overflow
16:58:48.752 LibTeleinfo: _recv_idx = 128/128 buffer overflow
16:58:48.766 MQT: tele/TeleInfo/SENSOR = {"TIC":{"EAIT":6730889,"VTIC":2,"EASD02":43525417,"ERQ3":780254,"EASD03":0,"ERQ4":4447898,"IRMS1":12,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"EASF10":0,"EASF06":0,"ERQ2":115942,"EASF03":0,"URMS1":232,"PREF":12,"ADSC":"031861721681","EAST":71749392,"ERQ1":4296047,"PCOUP":12,"CCASN":2728,"SINSTS":1508,"SIAXIN)1":2791,"EASF09":0,"NJOURF+1":0,"EASF02":36496683,"EASF07":0,"EASF04":0,"EASD01":28223966,"EASF08":0,"EASF05":0,"QIOY1":234,"EASD04":0,"PRM":2147483647,"AASF01":0,"CCAIN":0,"":")1","EASF01":35252706,"
16:58:49.002 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
16:58:49.256 LibTeleinfo::checkLine Err checksum 0x5E != 0x22
16:58:49.258 LibTeleinfo::checkLine Err checksum 0x56 != 0x5A
16:58:49.502 LibTeleinfo::checkLine Err checksum 0x43 != 0x55
16:58:50.002 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
16:58:50.257 LibTeleinfo::checkLine Err checksum 0x25 != 0x29
16:58:50.259 LibTeleinfo::checkLine Err checksum 0x5A != 0x22

R3 = 100 ohms j'ai ces log dans la console:

17:02:07.757 LibTeleinfo::checkLine Err checksum 0x2B != 0x20
17:02:08.005 LibTeleinfo::checkLine Err checksum 0x3B != 0x3F
17:02:08.007 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
17:02:08.269 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1349,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:08.503 LibTeleinfo::checkLine Err checksum 0x21 != 0x25
17:02:08.505 LibTeleinfo::checkLine Err checksum 0x26 != 0x2A
17:02:08.753 LibTeleinfo::checkLine Err checksum 0x57 != 0x23
17:02:08.755 LibTeleinfo::checkLine Err checksum 0x30 != 0x34
17:02:08.756 LibTeleinfo::checkLine Err checksum 0x3B != 0x43
17:02:09.007 LibTeleinfo::checkLine Err checksum 0x4E != 0x20
17:02:09.257 LibTeleinfo::checkLine Err checksum 0x3E != 0x42
17:02:09.513 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:09.518 LibTeleinfo::checkLine Err checksum 0x4C != 0x50
17:02:09.753 LibTeleinfo::checkLine Err checksum 0x24 != 0x28
17:02:09.755 LibTeleinfo::checkLine Err checksum 0x33 != 0x3B
17:02:10.003 LibTeleinfo::checkLine Err checksum 0x53 != 0x57
17:02:10.257 LibTeleinfo::checkLine Err checksum 0x4D != 0x5D
17:02:10.753 LibTeleinfo::checkLine Err checksum 0x39 != 0x3D
17:02:10.755 LibTeleinfo::checkLine Err checksum 0x5E != 0x26
17:02:11.003 LibTeleinfo::checkLine Err checksum 0x5E != 0x22
17:02:11.007 LibTeleinfo::checkLine Err checksum 0x57 != 0x5B
17:02:11.257 LibTeleinfo::checkLine Err checksum 0x3D != 0x41
17:02:11.259 LibTeleinfo::checkLine Err checksum 0x4E != 0x3B
17:02:11.261 LibTeleinfo::checkLine Err checksum 0x2D != 0x39
17:02:11.513 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:11.753 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:02:11.755 LibTeleinfo::checkLine Err checksum 0x46 != 0x4A
17:02:12.002 LibTeleinfo::checkLine Err checksum 0x44 != 0x48
17:02:12.004 LibTeleinfo::checkLine Err checksum 0x23 != 0x27
17:02:12.259 LibTeleinfo::checkLine Err checksum 0x4E != 0x52
17:02:12.263 LibTeleinfo::checkLine Err checksum 0x4C != 0x41
17:02:12.513 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:12.755 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:02:13.257 LibTeleinfo::checkLine Err checksum 0x5D != 0x25
17:02:13.263 LibTeleinfo::checkLine Err checksum 0x2A != 0x2E
17:02:13.503 LibTeleinfo::checkLine Err checksum 0x3E != 0x42
17:02:13.505 LibTeleinfo::checkLine Err checksum 0x58 != 0x5C
17:02:13.507 LibTeleinfo::checkLine Err checksum 0x58 != 0x5C
17:02:13.763 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:13.767 LibTeleinfo::checkLine Err checksum 0x28 != 0x39
17:02:13.769 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:02:14.002 LibTeleinfo::checkLine Err checksum 0x58 != 0x42
17:02:14.004 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:02:14.256 LibTeleinfo::checkLine Err checksum 0x2E != 0x36
17:02:14.502 LibTeleinfo::checkLine Err checksum 0x42 != 0x46
17:02:14.503 LibTeleinfo::checkLine Err checksum 0x57 != 0x5B
17:02:14.752 LibTeleinfo::checkLine Err checksum 0x38 != 0x3B
17:02:14.764 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:14.768 LibTeleinfo::checkLine Err checksum 0x20 != 0x5D
17:02:15.003 LibTeleinfo::checkLine Err checksum 0x27 != 0x20
17:02:15.005 LibTeleinfo::checkLine Err checksum 0x4A != 0x4E
17:02:15.006 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
17:02:15.008 LibTeleinfo::checkLine Err checksum 0x3E != 0x42
17:02:15.267 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:15.503 LibTeleinfo::checkLine Err checksum 0x24 != 0x28
17:02:15.505 LibTeleinfo::checkLine Err checksum 0x35 != 0x3D

R3 = 163 ohms j'ai ces log dans la console:

17:07:36.521 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF+1":0,"EASF02":36496683,"EASF07":0,"EASD02":43525579,"EASD03":0,"EAIT":6730889,"ERQ2":115942,"ERQ3":780254,"LTARF":"      BASE      ","EASF04":0,"EASF09":0,"EASF10":0,"URMS1":233,"PREF":12,"PCOUP":12,"SINSTS":1215,"SINSTI":0,"ADSC":"031861721681","VTIC":2,"
17:07:36.528 LibTeleinfo::checkLine Err checksum 0x56 != 0x1D
17:07:36.530 LibTeleinfo::checkLine Err checksum 0x47 != 0x3F
17:07:36.752 LibTeleinfo::checkLine Err checksum 0x50 != 0x4E
17:07:36.757 LibTeleinfo::checkLine Err checksum 0x46 != 0x42
17:07:37.002 LibTeleinfo::checkLine Err checksum 0x47 != 0x09
17:07:37.005 LibTeleinfo::checkLine Err checksum 0x4E != 0x46
17:07:37.006 LibTeleinfo::checkLine Err checksum 0x49 != 0x30
17:07:37.008 LibTeleinfo::checkLine Err checksum 0x2A != 0x24
17:07:37.256 LibTeleinfo::checkLine Err checksum 0x2F != 0x29
17:07:37.258 LibTeleinfo::checkLine Err checksum 0x32 != 0x2A
17:07:37.262 LibTeleinfo::checkLine Err checksum 0x28 != 0x01
17:07:37.264 LibTeleinfo::checkLine Err checksum 0x2B != 0x23
17:07:37.267 LibTeleinfo::checkLine Err checksum 0x25 != 0x17
17:07:37.502 LibTeleinfo::checkLine Err checksum 0x29 != 0x24
17:07:37.504 LibTeleinfo::checkLine Err checksum 0x4B != 0x33
17:07:37.506 LibTeleinfo::checkLine Err checksum 0x48 != 0x42
17:07:37.511 LibTeleinfo::checkLine Err checksum 0x44 != 0x3C
17:07:37.513 LibTeleinfo::checkLine Err checksum 0x39 != 0x55
17:07:37.752 LibTeleinfo::checkLine Err checksum 0x3B != 0x39
17:07:37.754 LibTeleinfo::checkLine Err checksum 0x54 != 0x1D
17:07:37.756 LibTeleinfo::checkLine Err checksum 0x47 != 0x3F
17:07:37.757 LibTeleinfo::checkLine Err checksum 0x47 != 0x40
17:07:37.759 LibTeleinfo::checkLine Err checksum 0x50 != 0x4E
17:07:38.004 LibTeleinfo::checkLine Err checksum 0x46 != 0x42
17:07:38.022 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF+1":0,"EASF02":36496683,"EASF07":0,"EASD02":43525579,"EASD03":0,"EAIT":6730889,"ERQ2":115942,"ERQ3":780254,"LTARF":"      BASE      ","EASF04":0,"EASF09":0,"EASF10":0,"URMS1":233,"PREF":12,"PCOUP":12,"SINSTS":1206,"SINSTI":0,"ADSC":"031861721681","VTIC":2,"
17:07:38.256 LibTeleinfo::checkLine Err checksum 0x43 != 0x3B
17:07:38.259 LibTeleinfo::checkLine Err checksum 0x2C != 0x26
17:07:38.261 LibTeleinfo::checkLine Err checksum 0x2F != 0x27
17:07:38.264 LibTeleinfo::checkLine Err checksum 0x41 != 0x28
17:07:38.502 LibTeleinfo::checkLine Err checksum 0x4E != 0x46
17:07:38.506 LibTeleinfo::checkLine Err checksum 0x21 != 0x5B
17:07:38.754 LibTeleinfo::checkLine Err checksum 0x3A != 0x39
17:07:39.255 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:07:39.257 LibTeleinfo::checkLine Err checksum 0x40 != 0x3C
17:07:39.259 LibTeleinfo::checkLine Err checksum 0x52 != 0x50
17:07:39.501 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
17:07:39.505 LibTeleinfo::checkLine Err checksum 0x36 != 0x27
17:07:39.506 LibTeleinfo::checkLine Err checksum 0x31 != 0x29
17:07:39.510 LibTeleinfo::checkLine Err checksum 0x2A != 0x22
17:07:39.751 LibTeleinfo::checkLine Err checksum 0x4A != 0x10
17:07:39.753 LibTeleinfo::checkLine Err checksum 0x5A != 0x57
17:07:39.754 LibTeleinfo::checkLine Err checksum 0x2A != 0x24
17:07:39.761 LibTeleinfo::checkLine Err checksum 0x34 != 0x01
17:07:40.002 LibTeleinfo::checkLine Err checksum 0x39 != 0x5D
17:07:40.020 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF+1":0,"EASF02":36496683,"EASF07":0,"EASD02":43525581,"EASD03":0,"EAIT":6730889,"ERQ2":115942,"ERQ3":780254,"LTARF":"      BASE      ","EASF04":0,"EASF09":0,"EASF10":0,"URMS1":233,"PREF":12,"PCOUP":12,"SINSTS":1206,"SINSTI":0,"ADSC":"031861721681","VTIC":2,"
17:07:40.028 LibTeleinfo::checkLine Err checksum 0x27 != 0x20
17:07:40.030 LibTeleinfo::checkLine Err checksum 0x25 != 0x27
17:07:40.031 LibTeleinfo::checkLine Err checksum 0x47 != 0x3F
17:07:40.255 LibTeleinfo::checkLine Err checksum 0x48 != 0x42
17:07:40.504 LibTeleinfo::checkLine Err checksum 0x2E != 0x26
17:07:40.751 LibTeleinfo::checkLine Err checksum 0x43 != 0x29
17:07:40.753 LibTeleinfo::checkLine Err checksum 0x28 != 0x22
17:07:40.757 LibTeleinfo::checkLine Err checksum 0x36 != 0x2E
17:07:41.001 LibTeleinfo::checkLine Err checksum 0x5D != 0x30
17:07:41.003 LibTeleinfo::checkLine Err checksum 0x5F != 0x1C
17:07:41.005 LibTeleinfo::checkLine Err checksum 0x4E != 0x4A
17:07:41.007 LibTeleinfo::checkLine Err checksum 0x21 != 0x41
17:07:41.008 LibTeleinfo::checkLine Err checksum 0x57 != 0x20
17:07:41.010 LibTeleinfo::checkLine Err checksum 0x43 != 0x3B
17:07:41.255 LibTeleinfo::checkLine Err checksum 0x5D != 0x20
17:07:41.257 LibTeleinfo::checkLine Err checksum 0x41 != 0x27
17:07:41.519 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF+1":0,"EASF07":0,"EASD02":43525581,"EASD03":0,"EAIT":6730889,"ERQ2":115942,"ERQ3":780254,"LTARF":"      BASE      ","EASF04":0,"EASF09":0,"EASF10":0,"URMS1":233,"PREF":12,"PCOUP":12,"SINSTS":1206,"SINSTI":0,"ADSC":"031861721681","VTIC":2,"
17:07:41.526 LibTeleinfo::checkLine Err checksum 0x50 != 0x4A
17:07:41.751 LibTeleinfo::checkLine Err checksum 0x44 != 0x3C
17:07:41.753 LibTeleinfo::checkLine Err checksum 0x4E != 0x46
17:07:41.755 LibTeleinfo::checkLine Err checksum 0x35 != 0x25
17:07:41.757 LibTeleinfo::checkLine Err checksum 0x2D != 0x27
17:07:41.760 LibTeleinfo::checkLine Err checksum 0x44 != 0x28
17:07:42.002 LibTeleinfo::checkLine Err checksum 0x4E != 0x46
17:07:42.006 LibTeleinfo::checkLine Err checksum 0x58 != 0x52
17:07:42.256 LibTeleinfo::checkLine Err checksum 0x55 != 0x39
17:07:42.258 LibTeleinfo::checkLine Err checksum 0x5B != 0x5D

R3 = 50 Ohms est la résistance qui me donne la trame la plus longue.
Elle reste quand même incomplète.
Est-ce que le buffer est assez grand pour traiter la trame TIC?
Mon compteur est censé me renvoyer le P index injection mais je ne le vois pas.

Charles

@Samquad Ah la vache tu ne rigoles pas avec les soudures, joli travail.

Bon ça semble mieux déjà, tu as bien pris la dernière version dispo dans tasmota special ?

Comme la trame n'est pas lue correctement du coups le buffer de ligne (taille maximale d'une ligne et pas d'une trame) ne voit pas la fin de ligne et continue d'écrire dedans, d'ou la saturation à 128.

C'est dommage que ce ne soit pas un ESP32 on aurait pu essayer simplement le programme de test que j'ai mis dans les exemples de la libteleinfo mais avec l'ESP8266 le debug c'est ingérable (une seule uart).

Question bête ton tasmota n'aurait pas un DS18B20 de connecté et à gérer aussi ?

Samquad

@Charles
J'ai téléchargé le firmware ici que j'ai installé.

J'ai effectivement une sonde de température DS18B20 de branchée.

Sur mon Wemos mini D1 j'ai plusieurs sondes:
1 module Pitinfo
1 sonde de température DS18b20 (sonde extérieure)
1 capteur d'impulsion (compteur d'eau)
1 relais shield pilotage (chauffe eau)

Configuration du module:

J'avais cette déjà cette configuration en mode historique et ça fonctionnait très bien. téléinfo déconne depuis que j'ai basculé sur le mode standard

Charles

@Samquad ok FW correct.

Yes mais en mode standard ça transmet 8 fois plus vite (donc 8 fois plus d'info) et les timings du DS18B20 sont assez gourmands. Tu pourrais juste désactiver toutes les autres fonctions pour voir ?

Samquad

@Charles
J'ai tout désactivé sauf teleinfo:

J'ai toujours des erreurs de checksum

Samquad

Le log

18:58:34.502 LibTeleinfo::checkLine Err checksum 0x36 != 0x3F
18:58:34.752 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:34.764 MQT: tele/TeleInfo/SENSOR = {"TIC":{"EASF04":0,"EASF09":0,"PREF":12,"PCOUP":12,"SINSTS":3584,"NJOURF+1":0,"VTIC":2,"EASF02":36496683,"EASF07":0,"IRMS1":16,"URMS1":223,"EASF03":0,"ADSC":"031861721681","EAST":71752696,"ERQ1":4296047,"SINSTI":0,"CCAIN":0,"EASD03":0,"ERQ4":4448209,"NJOURF":0,"EASD04":0,"EASD02":43528684,"ERQ3":780254,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EAIT":6730889,"EASF08":0,"EASF01":35256000,"EASF06":0,"ERQ2":115942,"EASF05":0,"EASD01":28223966,"PRM":2147483647,"CCASN":1056}}
18:58:34.767 LibTeleinfo::checkLine Err checksum 0x46 != 0x4A
18:58:34.769 LibTeleinfo::checkLine Err checksum 0x36 != 0x3C
18:58:34.771 LibTeleinfo::checkLine Err checksum 0x3E != 0x46
18:58:35.002 LibTeleinfo::checkLine Err checksum 0x21 != 0x25
18:58:35.004 LibTeleinfo::checkLine Err checksum 0x26 != 0x2A
18:58:35.256 LibTeleinfo::checkLine Err checksum 0x57 != 0x23
18:58:35.260 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
18:58:35.262 LibTeleinfo::checkLine Err checksum 0x3E != 0x42
18:58:35.263 LibTeleinfo::checkLine Err checksum 0x58 != 0x5C
18:58:35.266 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
18:58:35.502 LibTeleinfo::checkLine Err checksum 0x43 != 0x29
18:58:35.504 LibTeleinfo::checkLine Err checksum 0x37 != 0x3F
18:58:35.752 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
18:58:35.753 LibTeleinfo::checkLine Err checksum 0x4A != 0x4E
18:58:36.002 LibTeleinfo::checkLine Err checksum 0x4C != 0x50
18:58:36.256 LibTeleinfo::checkLine Err checksum 0x26 != 0x2A
18:58:36.258 LibTeleinfo::checkLine Err checksum 0x57 != 0x23
18:58:36.502 LibTeleinfo::checkLine Err checksum 0x22 != 0x41
18:58:36.504 LibTeleinfo::checkLine Err checksum 0x3A != 0x3B
18:58:36.752 LibTeleinfo::checkLine Err checksum 0x23 != 0x2B
18:58:43.516 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:43.518 LibTeleinfo::checkLine Err checksum 0x50 != 0x41
18:58:43.519 LibTeleinfo::checkLine Err checksum 0x38 != 0x3B
18:58:43.752 LibTeleinfo::checkLine Err checksum 0x5A != 0x3F
18:58:44.002 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:44.013 MQT: tele/TeleInfo/SENSOR = {"TIC":{"EASF04":0,"EASF09":0,"PREF":12,"PCOUP":12,"SINSTS":3532,"NJOURF+1":0,"VTIC":2,"EASF02":36496683,"EASF07":0,"IRMS1":16,"URMS1":223,"EASF03":0,"ADSC":"031861721681","EAST":71752696,"ERQ1":4296047,"SINSTI":0,"CCAIN":0,"EASD03":0,"ERQ4":4448209,"NJOURF":0,"EASD04":0,"EASD02":43528684,"ERQ3":780254,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EAIT":6730889,"EASF08":0,"EASF01":35256000,"EASF06":0,"ERQ2":115942,"EASF05":0,"EASD01":28223966,"PRM":2147483647,"CCASN":1056}}
18:58:44.017 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
18:58:44.258 LibTeleinfo::checkLine Err checksum 0x25 != 0x29
18:58:44.502 LibTeleinfo::checkLine Err checksum 0x5A != 0x22
18:58:44.504 LibTeleinfo::checkLine Err checksum 0x4E != 0x56
18:58:44.752 LibTeleinfo::checkLine Err checksum 0x3F != 0x20
18:58:45.002 LibTeleinfo::checkLine Err checksum 0x39 != 0x29
18:58:45.004 LibTeleinfo::checkLine Err checksum 0x3B != 0x3F
18:58:45.005 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
18:58:45.256 LibTeleinfo::checkLine Err checksum 0x20 != 0x24
18:58:45.502 LibTeleinfo::checkLine Err checksum 0x25 != 0x29
18:58:45.504 LibTeleinfo::checkLine Err checksum 0x57 != 0x23
18:58:45.754 LibTeleinfo::checkLine Err checksum 0x37 != 0x3B
18:58:46.012 MQT: tele/TeleInfo/SENSOR = {"TIC":{"EASF04":0,"EASF09":0,"PREF":12,"PCOUP":12,"SINSTS":3532,"NJOURF+1":0,"VTIC":2,"EASF02":36496683,"EASF07":0,"IRMS1":16,"URMS1":223,"EASF03":0,"ADSC":"031861721681","EAST":71752696,"ERQ1":4296047,"CCAIN":0,"EASD03":0,"ERQ4":4448209,"NJOURF":0,"EASD04":0,"EASD02":43528684,"ERQ3":780254,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EAIT":6730889,"EASF08":0,"EASF01":35256000,"EASF06":0,"ERQ2":115942,"EASF05":0,"EASD01":28223966,"PRM":2147483647,"CCASN":1056,"SINSTI":"8SMAXIN","":"1"}}
18:58:46.016 LibTeleinfo::checkLine Err checksum 0x42 != 0x3A
18:58:46.256 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:46.258 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:46.260 LibTeleinfo::checkLine Err checksum 0x35 != 0x39
18:58:46.502 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
18:58:46.752 LibTeleinfo::checkLine Err checksum 0x5E != 0x22
18:58:46.754 LibTeleinfo::checkLine Err checksum 0x26 != 0x2E
18:58:47.002 LibTeleinfo::checkLine Err checksum 0x37 != 0x3B
18:58:47.004 LibTeleinfo::checkLine Err checksum 0x42 != 0x3A
18:58:47.256 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:47.502 LibTeleinfo: _recv_idx = 128/128 buffer overflow

Charles

@Samquad c'est pas beaucoup mieux tu n'as que ça de branché sur ta sortie téléinfo du linky ?

La je ne sais plus trop quoi faire, tu es bien le premier à avoir ce soucis et sans pouvoir reproduire le soucis ou voir les signaux à l'oscillo je suis à court d'idée.

Peut être juste un programme de basic de test avec le Wemos (juste lire la serial et l'afficher) mais je ne suis pas certain qu'on ne verrait pas les mêmes erreurs.

Faudrait que j'arrive à trouver un linky avec le même soucis dans mon entourage.

Samquad

@Charles
J'ai un ESP32 sous la main: ce modèle

Est-ce que ça peut faciliter l'analyse avec le programme de test?

Par contre je suis pas mal novice dans le câblage et la programmation.
il faudrait m'indiquer quoi brancher où pour faire le test et comment programmer ce module esp32 et avec quel firmware.

Ca m'intéresse fortement si on peut faire fonctionner le module

Avant de tester avec un ESP32, je vais remplacer le câble de liaison entre le le compteur et le module au cas où le problème soit lié à des parasites. Je vais mettre un cable avec un blindage. Je te tiens au courant.

Samquad

@Charles
J'ai testé un câble de liaison blindé et j'ai les mêmes erreurs de checksum.
Je viens de terminer mon cablage avec un ESP32 fraichement flashé que j'ai juste configuré avec le téléinfo dessus pour faire des tests

Actuellement avec R3=220 ohm j'ai ces log

19:27:57.018 RSL: SENSOR = {"TIC":{"RELAIS":0,"NTARF":1,"NJOURF":0,"VTIC":2,"EASF01":35500858,"EASF06":0,"EASF07":0,"EASD02":43696842,"ERQ2":116014,"ERQ3":782455,"UMOY1":222,"PRM":2147483647,"EASF04":0,"EASF09":0,"EASD04":0,"IRMS1":12,"URMS1":231,"PREF":12,"PCOUP":12,"SINSTS":2831,"SINSTI":0,"":0,"EAST":71997543,"EASD01":28300702,"
19:27:57.033 LibTeleinfo::checkLine Err checksum 0x2E != 0x39
19:27:57.037 LibTeleinfo::checkLine Err checksum 0x42 != 0x3C
19:27:57.253 LibTeleinfo::checkLine Err checksum 0x54 != 0x50
19:27:57.260 LibTeleinfo::checkLine Err checksum 0x42 != 0x30
19:27:57.264 LibTeleinfo::checkLine Err checksum 0x2E != 0x28

L'ESP32 se comporte comme le Wemos mini D1.

Du coup , quel essai je pourrais faire avec l'ESP32?
Merci

Charles

@Samquad avec l'ESP32 il faudrait que tu essaie le programme de test de la librairie avec Arduino mais à mon avis tu auras les mêmes résultats.

Celui ci par exemple et ensuite tu regardes dans la console Arduino.
https://github.com/hallard/LibTeleinfo/tree/master/examples/ESP32_Passthru
Bien sur changes le code de la TIC_RX_PIN 8 avec la GPIO que tu utilises.

Samquad

@Charles

J'ai installé arduino sur mon PC mais je ne sais pas comment récupérer/installer ESP32_Passthru dans l'ESP32.

Est-ce que tu peux me guider?
Merci

Charles

@Samquad

Installer ESP32 pour Arduino (google et ton ami)
https://randomnerdtutorials.com/installing-the-esp32-board-in-arduino-ide-windows-
instructions/

tu choisis ensuite board ESP32 / le modèle te ta carte

installer la librairie LibTeleinfo (tu as des tutos de partout pour l'installation d'une librairie)

puis une fois fait dans Arduino tu fais
Fichiers / Exemples / LibTeleinfo / ESP32_Passthru

Puis tu compiles et upload

Samquad

@Charles
Merci j'ai enfin réussi à transférer le programme dans l'ESP32 avec Arduino.
J'ai adapté le GPIO RX et sélectionné le mode standard.
C'est très étrange:
dans la console à 9600 bauds je n'ai que des "?????", par contre si je paramètre sur 115200 bauds je vois ça dans la console:

Est-ce que le problème pourrait venir de mon pitinfo qui aurait un composant défectueux?

Samquad

@Charles
En complément j'ai configuré le module Pitinfo sur un Raspberry P3b pour essayer de récupérer des trames dans picocom

j'ai lancé la commande:

picocom -b 9600 -d 7 -p e -f n /dev/serial0

Je visualise ces données:

pi@raspberrypi:~ $ picocom -b 9600 -d 7 -p e -f n /dev/serial0
picocom v3.1

port is        : /dev/serial0
flowcontrol    : none
baudrate is    : 9600
parity is      : even
databits are   : 7
stopbits are   : 1
escape is      : C-a
local echo is  : no
noinit is      : no
noreset is     : no
hangup is      : no
nolock is      : no
send_cmd is    : sz -vv
receive_cmd is : rz -vv -E
imap is        : 
omap is        : 
emap is        : crcrlf,delbs,
logfile is     : none
initstring     : none
exit_after is  : not set
exit is        : no

Type [C-a] [C-h] to see available commands
Terminal ready
�JJJk'T5eJJJRk'T5eJJj'T5E
                         KC+�J"##K:@RD02	044024884	E
EA03	000000000	"
EASD04	000000000	#
EAIT	006767727	/
ERQ1	004302041


                ERP000106039	R
DRP2	000786376	"
4	004562624	[
IRMS1	016	5
URMS1	226	D
PREF	12	B
PCOUP	12	\
SINSTS	03526	V
SMAXSN	H2211201002006281	4
R
 XRN-1	H201119082547	10352	 
SINSTI	00000	<
SMAXIN	H221120104300068*
RN
  H221119103505	00263	J
CCASN	H221120140000	01254	4
CCASN-1	H020020032000	03176	
AIN	H221120140000	00000	^
CCAIN-1	H221120133000000>

                         TLNX0 000120141000	229	)
STGE	003A0101	;
MSG1	PAS DE          MESSAGE 	<

02432850902420	+
RE
  IS	000	B
NTARF	01	N
NJOURF	00	&
NJOURF+1	00	B
PJOURF+1	00008001 NONULDNNLE NONU	
                                                E NONUTILE NONUTILE NONUTILE NONTTHLELNNUTILE 
              ONUTILE NONUTILE	9
ADSC	031861721688

                    VTI00

                       DATH221100041335		8

TF	      BASE      	<
LTARF	      BASE      	F
EAST	072764226

                 EASF0026046646	J
EASF03	000000000	$
EASF04	000000000	%
EASF05	000000000

                EASF06	000000000	'
RF07	000000000	(
EAS08	000000000	)
EASF09	000000000	*
EASF10	000000000	

                        EASD01	02842944H
D@RD02	044224884	E
D03	000000000	"
EASD04	000000000	#
EAIT	006767727	/
ERQ1	004303141	K
ERQ2	00011713R

                 ERQ3	00068626"
PEF114561264	B
PUP	12	\
SINSTS	03304	P
SMAXSN	H221120100325	07394

                             SMAXSN-H220008082547	10352	 
SINSTI	00000	<
SMAXIN	H221120104300	01796	*
SMAXIN-1	H220018002405	00043	J
CCASN  021120140000	01254	4
CCASN-1	H221120133000206Y

CCAIN-1 H221120133000   00000012>140000	00000	^
UMOY1	H22112004000029	)
RTFD	003A0101	;
LRF1	R DE          MESSAGE         	<
PRM	12432850902420


                     RELAIS	00B

                                   NTAR0L

                                         NHNTR0$

HNTRF
PJNURF+100	00008001 NONUTILE NONUTILE NONUTILEN
                                                    THLDNO
                                                          TILE NONUTILE NONUTILE NONUTILE NONUTI
                DNNNTTI
                       	9
ADSC	021840620681	9
B	02	J
D@TE   221120141336		;
NGTF	      BASE      	<
LTARF	      BASE  

                   ER062744329	7
ASF021	036496683	P
EASF03	000000000	$
EASF04	000000000

                EASF0000000000	$
EF06	000000000	'
EASF07	000000000	(
EASF08	000000000	)
EASF09	000000000	


D@RD0008539445  H       EASF10	00000000"
ED02	044224884	E
EASD03	000000000	"
EASD04	000000000	#
EAIT	006766606

                ERP004202141	K
ERQ3	000786376	"
004560404	[
IRMS1	015	4
URMS1	026	D
PREF	12	B
OUP	12	\
S	NSTS	03321	O
SMAXSN	H221120100325	07391	4

                                 SMAXSN-H200008082547	10352	 
SINTI	00000	<
SMAXIN	H221120104300	01796	*
SMAXIN-1	H220008002405	00263	J
CCAS
    	H221120140000	01254	4
CCASN-1	H221120133000	02066

                            C@HH221000140000	00000	^
CCAIN-1	H221120133000	00000	>
UMOY1	H22112004100229	)
SG103A01PAS DE          MESSAGE         	<
PRM	1243284080242+
RE
  H000	
NRF	01	N
NJOPF	00	&
NJOUD+1	00	B
PJRF+1	00008001 NONUTILE NONUTILENNNU
                                     D NONUTI
                                              NONUTILE NONUTILE NONUTILE NONUTHLE 
  NNTTHLE 
          NUTILE	9
TH02	J30860620681	9
H221120141337		<
NGTF	      BASE      	<
LTARF	      BASE   F

                      EAR070644220	/
D@S01	036267447	K
EASF02	036496683	P
EASF03	000000000	$
EASF04	000000000

                EASF0000000000	$
RF0000000000	'
EA07	000000000	(
EASF08	000000000	)
EASF09	000000000	*
EASF10	000000000

                D@RD0008539446		
EASD03	000000000	"
EASD04	000000000	#
EAIT	006767727	/
ERQ1	00430314J

                 ERQ2	000006028
PP000784376	"
ERQ4	004562624	[
	PMS1	015	4
URMS1	226	D
PREF	12	B
PCOUP	12	\
SINSTS	03328	V
SMAXSN	H2211201003206284
RL@XR

     H221119082547	10352	 
SINSTI	00000	<
SMAXIN	H221120104300	00784


CCASN   H221120140000   01254M@X4N-H221119103505	00263	J
CCASN-1	H221100022000	03176	Y
BBAIN  221120140000	00000	^
CCAIN-1	H221120133000	0000<

                             UMOXH220100141000	009	)
STGE	003A0101	;
MSG1	PAS DE          MESSAGE   <

                                   PR00422850900400	+
RELAIS	000	B
NJOURF+100	00	B
PJOURF+1	00008001 NONUTILE
                                 NNTTHLE 
                                         ONUTILE 
                                                 ONUTILE NONUTILE NONUTILE NONUTHLDNNNHLE NON	LE NONUTILE	9
ADSC	020860620481	9
D@TD0	H221100141338		=
GTF	      BASE      	<
LTARF	      BASE F

                    EA062664231	0
RF01	034047648	L
EAS02	036496683	P
EASF03	000000000	$
EASF04	00000000$
EASF0000000000	&
D@RF06	000000000	'
SF07	000000000	(
EASF08	000000000	)
EASF09	000000000	*

                         EASF10	00000000"
D@0028539447	J
EASD02	044224884	E
EASD03	000000000	"
EASD04	000000000	#
EAIT	00676662/

DRP2    000117139ER00420R041	K
ER3	000786376	"
ERQ4	004562625	\
IRMS1	015	4
URMS1	226	D
PREF	12	B
PCOUP	12	\
SINSTS	03323	P

MAXSN-1 H221119082547SN	10352201 0225	07391	4
SINSTI	00000	<
SMAXIN	H2210200042001796	(

AXIN-1	H001119103505	00263	J
CCASN	H221120140000	00044

                             CC@RN
CCAIN   H221120140000   00000   ^ H220120133000	03176	Y
CCAIN-1	H2211200220000000	>
TLOY1	H221120141000	229	)
STGE	003A0101	;
PRM1	12430850902420 L+RD       	<
RELAIS	000	B
NTARF	01	N
LJOURF+100	00	B
PJOURF+1	00008001 NONUTILE NONUTILE 
                                           NTTHLD 
                                                  LUTILE NNUTILE NONUTILE NONUTILE NONUTILDNNNLE NONUT	
                        E	9
ADSC	031861721681	9
VTIC	02	J
DATE	H2211201413>8

                    NGTF	B@S      	<
LTA	      BASE      	F
EAST	072764332	1
EASF01	03626764L

                 EASF0024486682	P
DA02	000000000	$
EASF04	000000000	%
EASF05	000000000	&
EASF06	000000000	

@RF0000000000   )       EASF07	00000000(
EA09	000000000	*
EASF10	000000000	"
EASD01	028539448	K
EASD02	04422488D

ASD04   000000000D@RD000#000000	 
EAIT	006767727	/
ERQ1	004303141	K
ERQ2	000117139	R

                         ERQ3	000684266
RMS104460155	4
MS1	226	D
EF	12	B
PCO	12	\
SINSTS	03325	S
SMAXSN	H221120100325	07391	4
SMAXSN-1	H220008082547	10352	 
SINSTI	00000	<
SMAXIN	H221120104300	01796	*
BCASNN-1H001120140000090012540044	J
CCASN-1	H221120133000	0206X
CCA
 H220020140000	00000	^
HN
  H221120133000	00000	>
UMOY1	H221120141000	229	)
STGE	003A0101	:

                         MSG1	PARDD       MESSE         	<
PRM	12432850902420	+
RELAIS	000	B
NTARF	01	N
NJOURF	00

         NJOURF
               0	0B

                          PJNTRF*00008001 
                                          ONUTILE NONUTILE NONUTILE NONUTILENONTHLD NONILE NONUTILE NONUTILE NONUTILE NONUTI
                                           8

                                            ADSC	031861720680	8

                                                                         VT0J

                                                                             D@T220020141341		7
NGTF	      BASE      	<
LTARF	      BASE      	F
EAST	072744222

@SF02   034496683EARF002P267651	D
EASF03	000000000	$
EASF04	000000000	%
EASF05	00000000&

                 EASF0000000000	'
EASF08	000000000	)
EASF09	000000000	*
EASF10	000000000

                EASD0008428440	
EAD02	044204884	E
EASD03	000000000	"
EASD04	000000000	#
EAIT	006767727	/
ERQ1	00430204K

DRP2    000786376ER00000"139	R
ERQ4	004562625	\
IRMS1	015	4
URMS1	225	C
PREF	12	B
PCOUP	12	\
SINSTS	03294	X
SMAXSN	H2211201002206281	4
RL@
   -1	H221119082547	10352	 
SINSTI	00000	<
SMAXIN	H2211201043000686


                        RL@XI

                             H221119103505	00263	J
CCASN	H221120140000	01254	4
CCASN-1	H200020022000	03176	Y
CCA	
        	H221120140000	00000	^
CCAIN-1	H221120133000000>

                         LNXH200120141000	229	)
STGE	003A0101	;
MSG1	PAS DE          MESSAGE<
PR00432850900420	+
RELA	S	000	B
NTARF	01	N
HOURF	00	&

PJOURF+100	00008001 NONUTILE NONUTILD N
                                            TTHLE NO
                                                    TILE NONUTILE NONUTILE NONUTILE NONLDNNNTTI
               E NONUTILE	9
ADSC	031861721681	9
VTIC	02	J
DATE	H221120141342		8
LT@RF	      BASE      <       F
EAST	072764335	4
EASF01	036267652	G
EASF02	03649648P

                 EASF02	000000000	$
04	000000000	%
EASF05	000000000	&
EASF06	000000000	'
EASF07	000000000

D@RF08  000000000SF00000*0000	)
EF10	000000000	"
EASD01	028539451	E
EASD02	044224884	

                        EASD03	00000000"
EAIT0000004767727	/
ERQ1	004303141	K
ERQ2	000117139	R
ERQ3	000786376	

                        ERQ4	00454062\

                                         HRLS004
TRLS026	D
PBNUP	12	B
SMAXSN	H221120100325	07391	4
SMAXSN-1	H2211190824400242	 

SMAXIN	H001120104300	01796	*
SMAXIN-1	H221119103500026J
BBAH221120140000	01254	4
CCASN-1	H221120133000	03176	Y
CCAIN	H2210200400000000	^
BCA	L-1	H221120133000	00000	>
UMOY1	H221120141000	229

LRFP DE          MESSAGE         02@000:<
PRM	12432850902420


                     RELAI00@

                             NTAR00	


                                        R0&
NJOURF+0B

         PJOU
             00008001 NONUTILE NONUTILE NONUTILE NONUTILE NNNTTHLE 
                                                                   NNUTILE 

                                                                           UTILE NONUTILE NONUTILE NONUTIL8
ADSC	020861600681	9
VTI02	J
D@TD	H001120141343		9
NFTBA      	<
LT	      BASE      	F
EAST	072764336	5
EASF01	03626764H

                 EASF0024486683	
ED03	000000000	$
EASF04	000000000	%
EASF05	000000000	&
EASF06	000000000

D@RF08  000000000ASF0000)00000	(
EF09	000000000	*
EASF10	000000000	"
EASD01	028539452	F

                         EASD02	04420488D
EASD0400000000000	#
EAIT	006767727	/
ERQ1	004303141	K
ERQ2	00011713R

                 ERQ3	00068626"
PEFS14561265	B
PP	12	\
SINSTS	03306	R
SMAXSN	H221120100325	07391	4
SMAXSN-H221108082547	10352	 
SINSI	00000	<
SMAXIN	H221120104300	01796	*
SMAXIN-1	H220008002405	00043	J
CCASN  001120140000	01254	4
CCASN-1	H221120133000206Y

                         CH220020140000	00000	^
CCAIN-1	H221120133000	00000	>
UMOY1	H22112004000229	)
RTF003A0101	;
M1	PAS DE          MESSAGE         	<
PRM	1243284080042+
RD000	B
NTA	01	N
NJOU	00	&
NJOUR+1	00	B
PJOURF+1	00008001 NONUTILE NONUTILENNNTTHLLONUTILE 
                                                          ONUTILE NONUTILE NONUTILE NONUTHLDN
             TTHLE NONTILE	9
ADSC	031861721681	9
VTIC	02	J
DATE	H2211201412:4

                    N BE      	<

ARF	      BASE      	F
EAST	072764337	6
EASF01	03626765H

                 EASF0026486683	
@RF03	000000000	$
EAS04	000000000	%
EASF05	000000000	&
EASF06	000000000	&

                         EASF07	00000000(
D@RF0000000000	)
ASF09	000000000	*
EASF10	000000000	"
EASD01	028539453	G
EASD02	04402488D
DA0000000000	"
EASD04	000000000	#
EAIT	006767727	/
ERQ1	004303141	K
ERQ2	000117139	R

                         ERQ3	000686266

                                        004460405	\
HRMS1	014	5
PREF1	125	B
OUP	12	\
S	
        STS	03551	T
SMAXSN	H221120100325	07391	4
SMAXSN-1	H220008082547	10352	 
SINI	00000	<
MAXIN	H221120104300	01796	*
SMAXIN-1	H2210080024000263	J
BB@RH000020140000	01254	4
CCASN-1	H221120133000	03176	Y
BB@IN-10211201330000000000000	>
UMOY1	H221120141000	229	

                               STGE	002@000:

                                                LSP@RDE          MESSAGE         	<
PRM	12432850902420	+
RELAIS	00B

           NTAR0N

                 NJOTRF	00

                         NJNTRF+00	B
PJNTRF+1	00008001 NONUTILE NONUTILE NONUTILE NONTTHLD N
                                                              UTILE N
                                                                     UTILE NONUTSCE NONU031861721681ENNL9
VTIC	02	J
DATE	H221120141345		;
NGTF	      BA<

                 LT    SE      	F
ST	072764338	7
EASF01	036267655	J
EASF02	036496683	

                        EASF03	00000000$
EASF0500000000000	&
EASF06	000000000	'
EASF07	000000000	(
EASF08	000000000

               DA0000000000	*
EASF10	000000000	"
EASD01	028539454	H
EASD02	044224884	E
EASD03	000000000

                E@RD0000000000	#
EPQ1	0043031410676772K	/
ERQ2	000117139	R
ERQ3	000786376	"
ERQ4	00456260\

                 IRMR014

PD02    B               RLR225
P12	\
RHNS	03799	 
XSN	H221120100325	07391	4
SMAXSN-1	H2211190825400242
RHN00000	<
RMIN	H221100104300	01796	*
SMAXIN-1	H221119103505	0004J

                                     CC@RN     000020140000	01254	4
SN-1	H221120133000	03176	Y
CCAIN	H2211201400000000	^
BB@HN-1	H221120133000	00000	>
UMOY1	H221120141000	229	)

                                 STGE	003
Terminating...
Skipping tty reset...
Thanks for using picocom
pi@raspberrypi:~ $

Je vais recommander un module neuf pitinfo V1.3a pour remplacer le miens .
Si jamais je constate encore le même problème est-ce que le compteur Linky peut être mis en cause?

Charles

@Samquad si tu commandes, peux tu me donner ton N° de commande, je vais essayer de changer une resistance
Pourtant tes traces m'ont pas l'air si déconnantes que çà (mis à part de temps en temps)
Ton linky en cause, je ne pense pas mais j'aimerais bien avoir le même pour faire des tests

Samquad

@Charles

Voici le numéro de la commande Tindie Order #357550

Tasmota sensor 12.1.1.2 avec linky mode Standard --> Libteleinfo checkline error checksum...

3

5.7k

534

5.0k

Top Topics

Popular Tags