PiTinfo + wemos / mysensors ?

Charles

Super,

Sinon c'est inclus dans tasmota aussi maintenant c'est en cours aussi pour le linky sur mon repo ici
https://github.com/hallard/Tasmota

carmelo42

ah ! ça c'est cool, j'utilise Tasmota pour piloter quelques luminaires

Et bien je vais tester ça au plus vite (dès que la température sera assez fraîche pour sortir jusqu'à mon compteur ^^)

Charles

Pour le moment c'est vu comme un device "energy" et ça ajoute tous les champs dans la trame MQTT

{
  "Time": "2020-08-10T16:21:30",
  "ENERGY": {
    "TotalStartTime": "2020-06-15T19:19:35",
    "Total": 3460.781,
    "Yesterday": 0.559,
    "Today": 3460.222,
    "Power": 210,
    "Current": 1,
    "Load": 6,
    "ADCO": 2147483647,
    "OPTARIF": "HC..",
    "ISOUSC": 15,
    "HCHC": 719033,
    "HCHP": 1730210,
    "PTEC": "HP..",
    "IINST": 1,
    "IMAX": 2,
    "PAPP": 210,
    "HHPHC": "A",
    "MOTDETAT": 0
  }
}

carmelo42

Petite question, jusqu'à présent pour flasher tasmota sur un device j'utilisais le .bin fourni ici http://thehackbox.org/tasmota/release/

Pour utiliser ta version, comment dois-je faire ?

Charles

Essayes ça

http://hallard.me/blog/wp-content/uploads/tasmota-sensors.bin.gz

si tu veux le faire en OTA tu dois faire en 2 étapes

upgrade avec firmware minimal http://thehackbox.org/tasmota/release/tasmota-minimal.bin
une fois rebooté, upgrade avec ma version http://hallard.me/blog/wp-content/uploads/tasmota-sensors.bin.gz

carmelo42

merci
je teste ça une fois que j'ai réussi à faire fonctionner le module pitinfo sur un raspberry déjà (j'ouvre un nouveau sujet pour ça)

carmelo42

J'ai réussi à utiliser avec mon pi 0, je passe au wemos / tasmota.
J'ai flashé le FW que tu m'as donné, je suis connecté au wemos / tasmota, par contre j'aurai besoin d'un peu d'aide sur la configuration de Tasmota : j'ai branché le Tx du pitinfo sur le Rx du wemos, par contre, comment faire pour envoyer les infos sur mon jeedom ? (via mqtt par exemple)

Charles

Cool
Alors oui petite subtilité de la config, moi j'ai une carte WifInfo avec une led RGB WS2812 sur GPIO0 et de l'I2C, la teleinfo arrive sur GPIO3

Voici le template que j'utilise (qui doit fonctionner pour toi)
A rentrer dans le menu Configuration / Configure Other

Bien cocher activate

{"NAME":"WifInfo","GPIO":[7,255,255,210,6,5,255,255,255,255,255,255,255],"FLAG":15,"BASE":18}

ensuite tu peux modifier à ta guise dans via le menu Configuration / Configure Template

La subtilité c'est de bien configurer la pin TInfo Rx sur la bonne GPIO (ici GPIO3)

regarde bien dans la console web au boot tu devrais voir arriver des choses. En revanche je ne sais pas quel format de payload attend jeedom, tu devras peut être faire qq modif de ce coté

00:00:00 CFG: Loaded from flash at F9, Count 196
00:00:00 QPC: Flag 7E
00:00:00 CFG: CR 385/699, Busy 0
00:00:00 SRC: Restart
00:00:00 Project tasmota Tasmota Version 8.4.0.1(sensors)-2_7_3_2
00:00:00 TIC: inferface speed 1200 bps
00:00:00 TIC: RX on GPIO3
00:00:00 TIC: always enabled
00:00:00 SNS: Hardware Serial
00:00:00 SER: Set to 7E1 1200 bit/s
00:00:00 TIC: using hardware serial
00:00:00 TIC: Ready
00:00:00 SHT: Sensor did not ACK command
00:00:00 I2C: TSL2561 found at 0x39
00:00:00 WIF: Checking connection...
00:00:00 WIF: Attempting connection...
00:00:00 WIF: Connecting to AP1 CH2I-HOTSPOT Channel 6 BSSId 58:6D:8F:0F:73:3D in mode 11N as wifinfo_7B43-6979...
00:00:01 WIF: Checking connection...
00:00:01 WIF: Attempting connection...
00:00:02 WIF: Checking connection...
00:00:02 WIF: Attempting connection...
00:00:03 WIF: Checking connection...
00:00:03 WIF: Attempting connection...
00:00:04 TIC: # ADCO=021528603314
00:00:04 TIC: Contract changed, now 'HC..' (2)
00:00:04 TIC: # OPTARIF=HC..
00:00:04 TIC: ISousc set to 15
00:00:04 TIC: # ISOUSC=15
00:00:04 TIC: HC:719467  HP:0  Total:719467
00:00:04 TIC: # HCHC=000719467
00:00:04 TIC: HC:719467  HP:1731149  Total:2450616
00:00:04 TIC: # HCHP=001731149
00:00:04 TIC: Tarif changed, now 'HP..' (4)
00:00:04 TIC: # PTEC=HP..
00:00:04 TIC: Current 001, now 1
00:00:04 TIC: # IINST=001
00:00:04 TIC: # IMAX=002
00:00:05 WIF: Checking connection...
00:00:05 WIF: Connected
00:00:05 TIC: Power 00220, now 220
00:00:05 TIC: # PAPP=00220
00:00:05 TIC: # HHPHC=A
00:00:05 RSL: tele/wifinfo_7B43/MARGINS = {"MARGINS":{"PowerDelta":220}}
00:00:05 RSL: tele/wifinfo_7B43/SENSOR = {"Time":"1970-01-01T00:00:05","ENERGY":{"TotalStartTime":"2020-06-15T19:19:35","Total":6923.084,"Yesterday":0.559,"Today":6922.525,"Power":220,"Current":1.000,"Load":6,"ADCO":2147483647,"OPTARIF":"HC..","ISOUSC":15,"HCHC":719467,"HCHP":1731149,"PTEC":"HP..","IINST":1,"IMAX":2,"PAPP":220,"HHPHC":"A"}}
00:00:05 HTP: Web server active on wifinfo_7B43-6979 with IP address 192.168.1.40
00:00:05 TIC: # MOTDETAT=000000
12:08:36 NTP: UTC 2020-08-11T10:08:35, DST 2020-03-29T02:00:00, STD 2020-10-25T03:00:00
12:08:36 QPC: Reset
12:08:36 MQT: Attempting connection...
12:08:36 MQT: Connected
12:08:36 MQT: tele/wifinfo_7B43/LWT = Online (retained)
12:08:36 MQT: cmnd/wifinfo_7B43/POWER = 
12:08:36 MQT: Subscribe to cmnd/wifinfo_7B43/#
12:08:36 MQT: Subscribe to cmnd/tasmotas/#
12:08:36 MQT: Subscribe to cmnd/DVES_C07B43_fb/#
12:08:36 MQT: tele/wifinfo_7B43/INFO1 = {"Module":"WifInfo","Version":"8.4.0.1(sensors)","FallbackTopic":"cmnd/DVES_C07B43_fb/","GroupTopic":"cmnd/tasmotas/"}
12:08:36 MQT: tele/wifinfo_7B43/INFO2 = {"WebServerMode":"Admin","Hostname":"wifinfo_7B43-6979","IPAddress":"192.168.1.40"}
12:08:36 MQT: tele/wifinfo_7B43/INFO3 = {"RestartReason":"External System"}
12:08:36 MQT: stat/wifinfo_7B43/RESULT = {"POWER":"OFF"}
12:08:36 MQT: stat/wifinfo_7B43/POWER = OFF
12:08:36 TIC: Power 00210, now 210
12:08:36 TIC: * PAPP=00210
12:08:37 MQT: tele/wifinfo_7B43/MARGINS = {"MARGINS":{"PowerDelta":-10}}
12:08:37 MQT: tele/wifinfo_7B43/SENSOR = {"Time":"2020-08-11T12:08:37","ENERGY":{"TotalStartTime":"2020-06-15T19:19:35","Total":6923.084,"Yesterday":0.559,"Today":6922.525,"Power":210,"Current":1.000,"Load":6,"ADCO":2147483647,"OPTARIF":"HC..","ISOUSC":15,"HCHC":719467,"HCHP":1731149,"PTEC":"HP..","IINST":1,"IMAX":2,"PAPP":210,"HHPHC":"A","MOTDETAT":0}}
12:08:38 APP: Boot Count 113
12:08:39 CFG: Saved to flash at F8, Count 197, Bytes 4096
12:08:39 TIC: Power 00170, now 170
12:08:39 TIC: * PAPP=00170
12:08:40 MQT: tele/wifinfo_7B43/MARGINS = {"MARGINS":{"PowerDelta":-40}}
12:08:40 MQT: tele/wifinfo_7B43/SENSOR = {"Time":"2020-08-11T12:08:40","ENERGY":{"TotalStartTime":"2020-06-15T19:19:35","Total":6923.084,"Yesterday":0.559,"Today":6922.525,"Power":170,"Current":1.000,"Load":6,"ADCO":2147483647,"OPTARIF":"HC..","ISOUSC":15,"HCHC":719467,"HCHP":1731149,"PTEC":"HP..","IINST":1,"IMAX":2,"PAPP":170,"HHPHC":"A","MOTDETAT":0}}
12:08:41 MQT: tele/wifinfo_7B43/STATE = {"Time":"2020-08-11T12:08:41","Uptime":"0T00:00:13","UptimeSec":13,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"POWER":"OFF","Dimmer":84,"Color":"D65856","HSBColor":"1,60,84","Channel":[84,35,34],"Scheme":0,"Width":1,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"CH2I-HOTSPOT","BSSId":"58:6D:8F:0F:73:3D","Channel":6,"RSSI":90,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:06"}}
12:08:41 MQT: tele/wifinfo_7B43/SENSOR = {"Time":"2020-08-11T12:08:41","ENERGY":{"TotalStartTime":"2020-06-15T19:19:35","Total":6923.084,"Yesterday":0.559,"Today":6922.525,"Period":1731149,"Power":170,"Current":1.000,"Load":6,"ADCO":2147483647,"OPTARIF":"HC..","ISOUSC":15,"HCHC":719467,"HCHP":1731149,"PTEC":"HP..","IINST":1,"IMAX":2,"PAPP":170,"HHPHC":"A","MOTDETAT":0},"TSL2561":{"Illuminance":33.330}}
12:08:41 TIC: Power 00200, now 200
12:08:41 TIC: * PAPP=00200
12:08:42 MQT: tele/wifinfo_7B43/MARGINS = {"MARGINS":{"PowerDelta":30}}
12:08:42 MQT: tele/wifinfo_7B43/SENSOR = {"Time":"2020-08-11T12:08:42","ENERGY":{"TotalStartTime":"2020-06-15T19:19:35","Total":6923.084,"Yesterday":0.559,"Today":6922.525,"Power":200,"Current":1.000,"Load":6,"ADCO":2147483647,"OPTARIF":"HC..","ISOUSC":15,"HCHC":719467,"HCHP":1731149,"PTEC":"HP..","IINST":1,"IMAX":2,"PAPP":200,"HHPHC":"A","MOTDETAT":0}}
12:08:42 TIC: Power 00170, now 170
12:08:42 TIC: * PAPP=00170
12:08:43 MQT: tele/wifinfo_7B43/MARGINS = {"MARGINS":{"PowerDelta":-30}}
12:08:43 MQT: tele/wifinfo_7B43/SENSOR = {"Time":"2020-08-11T12:08:43","ENERGY":{"TotalStartTime":"2020-06-15T19:19:35","Total":6923.084,"Yesterday":0.559,"Today":6922.525,"Power":170,"Current":1.000,"Load":6,"ADCO":2147483647,"OPTARIF":"HC..","ISOUSC":15,"HCHC":719467,"HCHP":1731149,"PTEC":"HP..","IINST":1,"IMAX":2,"PAPP":170,"HHPHC":"A","MOTDETAT":0}}
12:08:44 TIC: Power 00200, now 200
12:08:44 TIC: * PAPP=00200

jcoudrais

Salut @Charles,
mon 2020's Pitinfo marche nickel avec le wemos selon cette config.
Je souhaite basculer le TIC en mode standard, faut-il modifier la config stp ?

Charles

@jcoudrais yes il faut passer la commande dans la console

EnergyConfig standard