Ré-écriture de Wifinfo pour traiter le mode standard du Linky

Alexandre Thevenot

Bonjour à tous, nouveau sur la discussion, pas sûr d'être d'une grande aide mais si au moins je peux aider à tester.. Module Pitinfo acheté il y a quelques mois + Wemos D1 mini, et je n'ai pas réussi à le faire fonctionner avec ton interface @admin , j'ai du manquer un truc.. bref.. En suivant cette discussion j'ai finalement réussi à avoir quelquechose qui semble partiellement fonctionner. Je suis sur la version 8.4.0.1 de tasmota-sensor et j'obtiens ça :
Des valeurs qui semblent cohérentes mais aucune information sur l'ampérage et la charge.. Ah et j'ai oublié de préciser, c'est sur un linky..
Je peux tester d'autres choses si besoin. @admin si tu fais des MAJ sur ton github par exemple.
Bonne journée !
Alexandre

Charles

Bonjour Alexandre,
peux tu envoyer une capture des log de la console, je pense que tu dois avoir une etiquette IINST1 sur ton linky en mode historique, elle n'est pas traitée, je vais l'ajouter si c'est ça

@Seb-H normalement la version dev sur le git de tasmota intègre le mode standard du linky, j'ai pas testé sans linky donc si ça marche on aura de la chance.

Pour passer du mode historique au mode standard nouvelle commande dans tasmota

mode historique (9600 bps)

setoption102 0

mode standard (9600 bps)

setoption102 1

Attention le device reboot juste après

Et c'est résistant au reset, donc à faire qu'une seule fois.

Merci à tous.

Alexandre Thevenot

C'est curieux que ça empêche le PI de fonctionner, la carte est peut être défectueuse mais j'en doute.

Si tu la mets sur le PI il démarre pas c'est bien ça ? A tu essayé de booter le PI avec la carte mais sans la téléinfo de connectée ?

Charles

pas la peine t'es en mode historique ca fonctionnera pas en mode standard.

Ce qui est très curieux c'est que tu n'ai pas l'étiquette IINST, jamais vu ca, tu consommes la puissance est à 510W mais pas de courant dans la trame

Alexandre Thevenot

Je vais me documenter un peu sur ces modes et ces étiquettes, là je suis largué ^^
Et oui, la valeur de conso est cohérente, j'ai essayé d'allumer et d'éteindre des appareils ça suit bien..

Charles

tu ne serais pas en triphasé, IINST3 à 2 correspondrait à ta puissance

Alexandre Thevenot

@Charles Hehe oui tout à fait, pas pensé à le préciser dsl

Charles

voila le pourquoi du comment. Pour le moment c'est pas géré le triphasé désolé. Et du coup la charge non calculée non plus car il faudrait agréger les 3 phases.
En revanche le mode historique du linky est pas top pour du triphasé je pense que tu ferais mieux à demander à ton fournisseur de passer ton linky en mode standard et pas historique

Alexandre Thevenot

@Charles Ok pas de souci, merci pour les conseils. J4essayerai de fouiller à l'occasion.

Seb H

@admin
C'est ok pour tester sur mon linky en mode standard. T'inquiète, je compilais déjà aussi auparavant. Tu peux me filer le lien de ton github ou je peux télécharger le package prêt à compiler ??

Charles

@Seb-H
Cool, le package prêt à compiler est déjà mergé dans la branche development de l'officiel tasmota

pascal Mochel

bonjour

mes compteurs ne s'incrémentent pas .
que faut t il configurer pour que cela compte ?

merci

Charles

Bonjour,
tu es en contrat base Linky, il doit me manquer une étiquette, tu peux faire une capture de la console WEB lors de l'envoie d'une trame MQTT ?

pascal Mochel

merci pour le retour , voila je pense que c est cela qu'il te faut :
10:04:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:04:55","Uptime":"0T01:40:09","UptimeSec":6009,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-28,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:04:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:04:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":420,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121175,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":420,"HHPHC":"A","MOTDETAT":0}}
10:09:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T01:45:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-30","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:09:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:09:55","Uptime":"0T01:45:09","UptimeSec":6309,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-29,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:09:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:09:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":430,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121211,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":430,"HHPHC":"A","MOTDETAT":0}}
10:14:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T01:50:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-27","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:14:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:14:55","Uptime":"0T01:50:09","UptimeSec":6609,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-30,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:14:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:14:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":400,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121241,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":400,"HHPHC":"A","MOTDETAT":0}}
10:19:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T01:55:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-29","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:19:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:19:55","Uptime":"0T01:55:09","UptimeSec":6909,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-30,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:19:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:19:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":540,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121277,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":540,"HHPHC":"A","MOTDETAT":0}}
10:24:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T02:00:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-28","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:24:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:24:55","Uptime":"0T02:00:09","UptimeSec":7209,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-32,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:24:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:24:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":490,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121313,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":490,"HHPHC":"A","MOTDETAT":0}}
10:29:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T02:05:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-31","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:29:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:29:55","Uptime":"0T02:05:09","UptimeSec":7509,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-30,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:29:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:29:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":400,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121348,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":400,"HHPHC":"A","MOTDETAT":0}}
10:34:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T02:10:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-30","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:34:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:34:55","Uptime":"0T02:10:09","UptimeSec":7809,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-28,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:34:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:34:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":400,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121378,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":400,"HHPHC":"A","MOTDETAT":0}}

Charles

Yes parfait

pour des soucis de lecture peux tu éditer ton post et mettre tout le texte de la trame entre triple backquote ` (donc 3 au debut et 3 à la fin) ca formate mieux et devient bien plus lisible

Exemple

21T10:34:55","Uptime":"0T02:10:09","UptimeSec":7809,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-28,"LinkCount":1,"Downtime":"0T00:00:03"}}

Merci à toi

Charles

@pascal-Mochel Alors c'est assez fun tu n'as pas l'index dans la trame (ah si pardon base), effectivement cette etiquette n'est pas traitée. Fix à faire de mon coté

Sinon pour info, tu peux de faire un setOption108 1 (ca envoi juste une trame MQTT à chaque reception de trame téléinfo) avec toutes les données de teleinfo sans tenir compte du mode Energy du device.

pascal Mochel

Avant de modifier le setoption

10:19:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:19:55","Uptime":"0T01:55:09","UptimeSec":6909,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-30,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:19:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:19:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":540,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121277,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":540,"HHPHC":"A","MOTDETAT":0}}
10:24:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T02:00:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-28","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:24:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:24:55","Uptime":"0T02:00:09","UptimeSec":7209,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-32,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:24:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:24:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":490,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121313,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":490,"HHPHC":"A","MOTDETAT":0}}
10:29:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T02:05:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-31","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:29:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:29:55","Uptime":"0T02:05:09","UptimeSec":7509,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-30,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:29:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:29:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":400,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121348,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":400,"HHPHC":"A","MOTDETAT":0}}
10:34:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T02:10:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-30","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:34:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:34:55","Uptime":"0T02:10:09","UptimeSec":7809,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-28,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:34:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:34:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":400,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121378,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":400,"HHPHC":"A","MOTDETAT":0}}
10:39:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T02:15:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-31","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:39:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:39:55","Uptime":"0T02:15:09","UptimeSec":8109,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-27,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:39:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:39:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":400,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121407,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":400,"HHPHC":"A","MOTDETAT":0}}
10:44:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T02:20:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-28","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:44:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:44:55","Uptime":"0T02:20:09","UptimeSec":8409,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-31,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:44:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:44:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":400,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121437,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":400,"HHPHC":"A","MOTDETAT":0}}
10:49:48 MQT: linky_pm/tele/HASS_STATE = {"Version":"8.4.0.2(tasmota)","BuildDateTime":"2020-08-19T13:03:24","Module or Template":"WifInfo","RestartReason":"Software/System restart","Uptime":"0T02:25:02","Hostname":"linky_pm-7262","IPAddress":"192.168.1.54","RSSI":"100","Signal (dBm)":"-26","WiFi LinkCount":1,"WiFi Downtime":"0T00:00:03","MqttCount":1,"LoadAvg":19}
10:49:55 MQT: linky_pm/tele/STATE = {"Time":"2020-08-21T10:49:55","Uptime":"0T02:25:09","UptimeSec":8709,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"mochel","BSSId":"34:49:5B:B9:5B:C0","Channel":11,"RSSI":100,"Signal":-31,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:49:55 MQT: linky_pm/tele/SENSOR = {"Time":"2020-08-21T10:49:55","ENERGY":{"TotalStartTime":"2019-11-29T19:05:42","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":400,"Current":2.000,"Load":6 "ADCO":"061964653612","OPTARIF":"BASE","ISOUSC":30,"BASE":1121468,"PTEC":"TH..","IINST":2,"IMAX":90,"PAPP":400,"HHPHC":"A","MOTDETAT":0}}

pascal Mochel

@Charles said in Ré-écriture de Wifinfo pour traiter le mode standard du Linky:

setOption108 1

Après setOption 108 1

Charles

Essaie ce PR, normalement ça va corriger ton index BASE

https://github.com/arendst/Tasmota/pull/9138

Seul le fichier xnrg_15_teleinfo.inoa changé.

https://github.com/arendst/Tasmota/blob/b3ea5a353c4753fcdaa785081bf47326a1c2e06e/tasmota/xnrg_15_teleinfo.ino

pascal Mochel

@Charles said in Ré-écriture de Wifinfo pour traiter le mode standard du Linky:

Attention le device reboot juste après
Et c'est résistant au reset, donc à faire qu'une seule fois.
Merci à tous.

super ca marche

merci

maintenant je vais tester la remonté d'info en mqtt sur home assistant

Ré-écriture de Wifinfo pour traiter le mode standard du Linky

2

5.7k

534

5.0k

Top Topics

Popular Tags